Epson EPL N3000DT User Manual

328Technical Specifications
Laser safety
This printer is certified as a Class 1 laser product under the U.S. 
Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to the Radiation Control for 
Health and Safety Act of 1968. This means that the printer does 
not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within 
protective housings and external covers, the laser beam cannot 
escape from the machine during any phase of...

Technical Specifications329
A
A
A
A
A
A
A
A
A
A
A
A
PostScript
Interfaces
Parallel interface
Use the IEEE 1284-I compliant parallel interface connector.
ECP mode/Nibble mode
USB interface
USB 1.1
Note:
Only computers equipped with a USB connector and running Windows 
Me, 98, XP, or 2000 support the USB interface.
Ethernet interface
You can use an IEEE 802.3 100BASE-TX/10 BASE-T 
straight-through shielded, twisted-pair interface cable with an 
RJ45 connector.Language Adobe PostScript 3
Emulation name in...

330Technical Specifications
Options and Consumable
550-Sheet Paper Cassette Unit A4
Product number: C12C802091
Paper size: A4, A5, B5, Letter, Legal, Government 
Letter, Executive, Government Legal, 
F4, Mon, Com #10, DL, C5, C6, ISO-B5
Paper weight: 60 to 216 g/m² (16 to 43.4 lb)
Paper feed: One paper cassette mounted
Automatic feed delivery system
Cassette capacity up to 550 sheets 
(64 g/m²) (Maximum height: 59.4 mm)
Paper types: Plain paper, thick paper, transparencies, 
envelopes
Power supply: DC...

Technical Specifications331
A
A
A
A
A
A
A
A
A
A
A
A
Stacker
Duplex Unit
Product number: C12C802111
Output capacity: Up to 500 sheets
Paper  size: Regular or custom paper sizes within the 
following size:
Width: 89.90 - 215.90 mm
Length: 139.70 - 355.60 mm
However, when using custom size 
paper that is 76.2 mm to 89.9 mm wide 
and 127.0 mm to 139.7 mm long, the 
paper cannot be output to the Stacker so 
it is output to the face-down tray.
Paper types: Plain paper, thick paper
Power supply: DC 24V - 0.4A...

332Technical Specifications
Hard Disk Drive
*  This product conforms to CE marking requirements in accordance with EC Directive 89/336/EEC.
Memory modules (EPL-N3000 only)
Make sure that the DIMM you purchase is compatible with 
EPSON products. For details, contact the store where you 
purchased this printer or the EPSON sales company. Paper size: Regular paper sizes (excluding  envelopes)
Paper types: Plain paper, thick paper
Power supply: DC 24V - 0.4A supplied by the printer
Power consumption: 3.3V -...

Technical Specifications333
A
A
A
A
A
A
A
A
A
A
A
A
Imaging cartridge
The actual number of pages you can print with an imaging 
cartridge varies depending on the type of printing.
Fuser Unit 120/220
* Product number varies by location. 
❏Service life may be shortened by repeatedly warming up the 
printer, or by frequently printing on envelopes, labels, thick 
paper, or transparencies. 
❏The actual number of pages you can print before replacing the 
fuser unit varies depending on the type of printing....

334Technical Specifications
Safety Information
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes 
contain important information and useful tips on the operation of your 
printer.
Safety Precautions
Be sure to follow these precautions carefully to ensure safe, 
efficient operation:
 

Technical Specifications335
A
A
A
A
A
A
A
A
A
A
A
A
❏Because the printer weighs approximately 20.9 kg (46.1 lb) 
without the imaging cartridge installed, one person should 
not lift or carry it. Two people should carry the printer, lifting 
it by the correct positions as shown below.
❏Unless specifically instructed in this guide, be careful not to 
touch the fuser, which is marked CAUTION HOT SURFACE, 
or the surrounding areas. If the printer has been in use, the 
fuser and the surrounding areas may be...

336Technical Specifications
*Unless specifically instructed in this guide, do not insert your hand into the her, as it may be 
very hot.
❏Do not insert your hand deep into the fuser unit, as some 
components are sharp and may cause injury.
❏Avoid touching the components inside the printer unless 
instructed to do so in this guide.
❏Never force the printer’s components into place. Although the 
printer is designed to be sturdy, rough handling can damage 
it.
❏When handling an imaging cartridge, always...

Technical Specifications337
A
A
A
A
A
A
A
A
A
A
A
A
❏Use only an outlet that meets the power requirements of this 
printer.
Important Safety Instructions
❏Connect your printer to an electrical outlet that meets the 
power requirements of this printer. Your printer’s power 
requirements are indicated on a label attached to the printer. 
If you are not sure of the power supply specifications in your 
area, contact your local power company or consult your 
dealer.
❏If you are unable to insert the AC plug...