Epson EPL N3000DT User Manual

348Functions of the Control Panel
Tray Menu
This menu allows you to specify the size and type of paper loaded 
in the MP tray. Accessing this menu also lets you check the size 
of the paper currently loaded in the lower cassettes.
The paper type settings in this menu can also be made from your 
printer driver. Settings you make in your printer driver override 
these settings, so use your printer driver whenever you can.
* Available only when the optional 550-Sheet Paper Cassette Unit is installed.
MP...

Functions of the Control Panel349
B
B
B
B
B
B
B
B
B
B
B
B
MP Type
Lets you set the paper type loaded in the MP tray.
LC1 Type/LC2 Type/LC3 Type
Lets you select the paper type loaded in the standard and optional 
550-Sheet Paper Cassette Unit.
Emulation Menu
Use this menu to select the printer emulation mode. You can 
specify different emulations for each interface; in other words, for 
each computer you connect the printer to. Since each emulation 
mode has its own specific options, make settings in the...

350Functions of the Control Panel
* Default paper sizes are automatically detected.
** Available only when the optional Duplex Unit is installed.
Page Size
Specifies the paper size.
Wide A4
Selecting On decreases the left and right margins from 4 mm to 
3.4 mm.
Orientation
Specifies whether the page is printed in portrait or landscape 
orientation.
Item Settings (default in bold)
Page Size* A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, 
MON, C10, DL, C5, C6, IB5, CTM
Wide A4Off, On
OrientationPort, Land...

Functions of the Control Panel351
B
B
B
B
B
B
B
B
B
B
B
B
Resolution
Specifies the printing resolution.
RITech
Turning RITech on produces smoother and crisper lines, text, and 
graphics.
Toner Save
When this setting is selected, the printer saves toner by 
substituting a gray shade for the black inside of characters. The 
characters are outlined in full black on the right and lower edges.
Density
Specifies the printing density.
Image Optimum
When this mode is on, the quality of graphics is reduced. It...

352Functions of the Control Panel
c
Caution:
Make sure that the printed image does not extend beyond the edge 
of the paper. Otherwise, you may damage the printer.
T Offset B
Adjusts the vertical printing position on the back of the paper 
when printing on both sides. Use this if the printout on the back 
is not where you expected.
L Offset B
Adjusts the horizontal printing position on the back of the paper 
when printing on both sides. Use this if the printout on the back 
is not where you expected....

Functions of the Control Panel353
B
B
B
B
B
B
B
B
B
B
B
B
* Available only when the corresponding option is installed.
** Available only when in PCL5e, ESC/Page, ESC/P2, or I239X mode.Item Settings (default in bold)
LangEnglish, Français, Deutsch, ITALIANO, 
ESPAÑOL, SVENSKA, Dansk, Nederl.,
SUOMI, Português
Time Out 0, 5... 60 ... 300 in 1 minute increments 
Paper SourceAuto, MP, LC1, LC2*, LC3*
Out BinFace-down, Stacker*
Stacker*Face-down, No Face-dwn
MP ModeNormal, Last
ManualFeedOff, 1stPage,...

354Functions of the Control Panel
Lang
Specifies the language displayed on the LCD panel and that 
printed on the status sheet.
Time Out
Specifies the length of the time the printer waits when it is ready 
to print and no new data is received. When this time is up, the 
printer searches for new print data from other interfaces.
Paper Source
Specifies whether paper feeds into the printer from the MP tray, 
the standard cassette, or from the optional Universal Cassette 
Unit, when Normal is selected as the...

Functions of the Control Panel355
B
B
B
B
B
B
B
B
B
B
B
B
MP Mode
This setting determines whether the MP tray has the highest or 
lowest priority when Auto is selected as the Paper Source setting 
in the printer driver. When Normal is selected as the MP Mode, 
the MP tray has the highest priority as the paper source. If you 
select Last, the MP tray has the lowest priority.
Manual Feed
Allows you to select the manual feed mode for the MP tray. For 
details on the manual feed mode, see “Manually feeding...

356Functions of the Control Panel
Paper Type
Specifies the type of paper to be used for printing. The printer 
adjusts the printing speed according to this setting. The printing 
speed is reduced when Thick or Trnsprnc is selected.
Skip Blank Page
Enables you to skip blank pages when printing. This setting is 
available when you print in the PCL5e, ESC/Page, ESCP2, FX, or 
I239X mode.
Auto Eject Page
Specifies whether or not to eject paper when the limit specified in 
the Time Out setting is reached. The...

Functions of the Control Panel357
B
B
B
B
B
B
B
B
B
B
B
B
Page Protect
Allocates additional printer memory for printing data, as 
opposed to receiving it. You may need to turn this setting on if 
you are printing a very complex page. If a Print Overrun error 
message appears on the LCD panel during printing, turn this 
setting on and reprint your data. This reduces the amount of 
memory reserved for receiving data so your computer may take 
longer to send the print job, but it will allow you to print...