Epson AcuLaser C4200DN User Manual

Technical Specifications411
B
B
B
B
B
B
B
B
B
B
B
B
*1Use recycled paper only under normal temperature and humidity conditions. Poor quality paper may reduce print quality, or cause paper jams and other 
problems.
*2When using extra thick paper, set the Paper Type setting in the printer driver to Extra Thick.
Paper that should not be used
You cannot use the following paper in this printer. It may cause 
printer damage, paper jams, and poor print quality:
❏ Media meant for other color laser printers,...

412Technical Specifications
❏
Carbon paper, carbonless paper, thermal-sensitive paper, 
pressure-sensitive paper, acid paper, or paper that uses 
high-temperature-sensitive ink (around 190 °C)
❏ Labels that peel easily or labels that do not cover the backing 
sheet completely
❏ Coated paper or special surface-colored paper
❏ Paper that has binder holes or is perforated
❏ Paper that has glue, staples, paper clips, or tape on it
❏ Paper that attracts static electricity
❏ Moist or damp paper
❏ Paper of...

Technical Specifications413
B
B
B
B
B
B
B
B
B
B
B
B
❏When using ESC/Page language, there is 5-mm minimum margin 
on all sides.
❏ The print quality may be irregular depending on the paper you use. 
Print on one or two sheets of pa per to check the print quality.
Printer
General
New  :For
 Emulation / confirm the
 product
 specification (
esp
. Paper f
eed
 alignment
 )
 

414Technical Specifications
Printing method: Laser beam scanning and dry electrophotographic process
Resolution: 4800 RIT
*1
Continuous printing 
speed*2: A maximum of 35 pages per minute black 
and white printing on A4 size paper
A maximum of 25 pages per minute color 
printing on A4 size paper
Paper feed: Automatic or manual feed
Paper feed alignment: Center alignment for all sizes
Input paper supply:
MP tray: Up to 150 sheets of plain paper (60~105  g/m²)
Up to a 15 mm thick stack of envelopes
Up to...

Technical Specifications415
B
B
B
B
B
B
B
B
B
B
B
B
*1Epson AcuLaser Resolution Improvement Technology
*2Printing speed varies by paper source or other conditions.
Environmental
Printer language: ECP/Page printer languageESC/P 2 24-pin printer emulation 
(ESC/P 2 mode)
ESC/P 9-pin printer emulation (FX mode)
IBM Proprinter emulation (I239X mode)
Adobe PostScript3
Resident fonts: 84 scalable fonts, and 7 bitmap fonts
RAM: 128 MB, expandable up to 640 MB
Temperature: In use: 5 to 32°C (41 to 90°F) Not in...

416Technical Specifications
Mechanical
Weight: Approx. 34.6 kg (about76.3 lb), excluding the consumables and options
Durability 5 years or 600,000 pages, whichever comes first  (under the condition of A4 size, horizontal plain 
paper)
437 mm588 mm
457 mm
 

Technical Specifications417
B
B
B
B
B
B
B
B
B
B
B
B
Electrical
*Completely suspended. Compliant with the Energy Star program.
Standard and approvals
New
 :confirm
 the
 destinations /
obtain t
he d
etails
 from ANKIU.S. model:
European model:
120 V Model 
KDAS-1a 220-240 V 
Model 
KDBS-1a
Voltage 120 V ± 10% 220 V-240 V ±  10%
Rated frequency 50 Hz / 60 Hz  ± 3 Hz50 Hz / 60 Hz 
± 3 Hz
Rated current Less than 10  ALess than 5 A
Power 
consumption During 
printingAverage 
(Color 
printing) 357 W 329 W...

418Technical Specifications Australian model:
Laser safety
This printer is certified as a Class 1 laser product under the U.S. 
Department of Health and Human Services (DHHS) Radiation 
Performance Standard according to the Radiation Control for 
Health and Safety Act of 1968. This means that the printer does 
not produce hazardous laser radiation.
Since radiation emitted by the laser is completely confined within 
protective housings and external covers, the laser beam cannot 
escape from the machine...

Technical Specifications419
B
B
B
B
B
B
B
B
B
B
B
B
CDRH regulations
The Center for Devices and Radiological Health (CDRH) of the 
U.S. Food and Drug Administration implemented regulations for 
laser products on August 2, 1976. Compliance is mandatory for 
products marketed in the United States. The label shown below 
indicates compliance with the CDRH regulations and must be 
attached to laser products marketed in the United States.
Interfaces
Parallel interface
Ne
w :c
on
f
ir
m t
h
e s
pe
ci
f
i
ca
t...

420Technical Specifications ❏Your computer must support USB 2.0 in order to use USB 2.0 as 
the interface to connect your computer to the printer.
❏Since USB 2.0 is fully compatible with USB 1.1, USB 1.1 can be 
used as an interface.
❏USB 2.0 can be used with Windows XP, 2000, and Server 2003 
operating systems. If your operating system is Windows Me or 98, 
use a USB 1.1 interface.
Ethernet interface
Ne
w :N/
W st
a
nd
ar
d
 on
lyYou can use an IEEE 802.3 100BASE-TX/10 BASE-T 
straight-through shielded,...