Epson AcuLaser C1750N User Manual

3. Select Add a network, wireless or Bluetooth printer.
4. In the list of available printers, select the one you want to use, and then click Next.
Note:
❏In the list of available printers, the WSD printer is displayed in the form of http://IP address/
ws/.
❏If no WSD printer is displayed in the list, enter the printer’s IP address manually to create a WSD
printer. To enter the printer’s IP address manually, follow the instructions below. For Windows
Server 2008 R2, to create a WSD printer, you must be a...

Chapter 6
Using the Operator Panel Menus
Understanding the Printer Menus
When your printer is configured as a network printer available to a number of users, the access to the
operator panel menus can be limited. This prevents unauthorized users from using the operator panel
to inadvertently change the default menu settings that has been set by the administrator. However,
you can use settings for individual print jobs using the print driver. Print settings selected from the
print driver have precedence...

 Billing Meters
Use Billing Meters to check the total number of printed pages.
Note:
A password is required to enter the operator panel menus when Panel Lock Set is set to Enable. In
this case, enter the password you specified, and press the 
 button.
Values:
Total ImpressionDisplays the total number of color and monochrome prints (Color Impression +
Black Impression).
Color ImpressionDisplays the total number of color prints.
Black ImpressionDisplays the total number of monochrome prints.
 Admin Menu...

10Base HalfUses 10base-T half-duplex.
10Base FullUses 10base-T full-duplex.
100Base HalfUses 100base-TX half-duplex.
100Base FullUses 100base-TX full-duplex.
Note:
This item is displayed only when the printer is connected with a wired network.
Wireless Status (Epson AcuLaser C1750W Only)
Purpose: 
To display the information on the wireless signal strength. No changes can be made on the operator
panel to improve the status of the wireless connection.
Values:
GoodIndicates good signal strength....

Values:
Manual Setup Enter (SSID)Specify a name to identify the wireless network. Up to 32 alphanumeric char-
acters can be entered.
InfrastructureSelect when you configure the wireless setting through the access point such
as a wireless router.
No SecuritySpecify No Security to configure the wireless setting
without specifying a security method from WEP,
WPA-PSK-TKIP, and WPA2-PSK-AES.
WEP(64Bit)Specify the WEP 64bit Key to use through the wireless
network. Enter 10 hexadecimal characters.
Transmit...

Ad-hocSelect to configure the wireless setting without the access point such as a
wireless router.
No SecuritySpecify No Security to configure the wireless setting
without specifying the security method from WEP.
WEP(64Bit)Specify the WEP 64bit Key to use through the wireless
network. Enter 10 hexadecimal characters.
Transmit KeySpecify the transmit key from WEP
Key 1, WEP Key 2, WEP Key 3, and
WEP Key 4.
WEP(128Bit)Specify the WEP 128bit Key to use through the wireless
network. Enter 26 hexadecimal...

Values:
IP Mode Dual Stack*Uses both IPv4 and IPv6 to set the IP address.
IPv4 ModeUses IPv4 to set the IP address.
IPv6 ModeUses IPv6 to set the IP address.
IPv4 Get IP Address DHCP/AutoIP*Automatically sets the IP address.
BOOTPUses BOOTP to set the IP address.
RARPUses RARP to set the IP address.
DHCPUses DHCP to set the IP address.
PanelEnables the IP address entered on the operator panel.
IP AddressManually sets the IP address allocated to the printer.
Network MaskManually sets the subnet mask....

Email Alerts DisableDisables the Email Alerts feature.
Enable*Enables the Email Alerts feature.
EpsonNet Config DisableDisables an access to EpsonNet Config embedded in the printer.
Enable*Enables an access to EpsonNet Config embedded in the printer.
Bonjour (mDNS) DisableDisables the Bonjour (mDNS).
Enable*Enables the Bonjour (mDNS).
Host Access List
Purpose: 
To control the access from the specified IP addresses. The change becomes effective after the printer is
turned off and then on.
Values:...

USB Setup
Use the USB Setup menu to change printer settings affecting a USB port.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Port Status
Purpose: 
To change the USB settings on your printer. The change becomes effective after the printer is turned
off and then on.
Values:
DisableDisables the USB interface.
Enable*Enables the USB interface.
System Setup
Use the System Setup menu to configure the power saving mode, time-out time, job log auto print,
mm/inch setting,...

Enter 5 in Mode 1 to put the printer in Mode 1 five minutes after it finishes a job. This uses less energy,
but requires more warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with
room lighting and you notice lights flickering.
S e l e c t  a  h i g h  v a l u e  i f  y o u r  p r i n t e r  i s  i n  c o n s t a n t  u s e .  I n  m o s t  c i r c u m s t a n c e s ,  t h i s  k e e p s  t h e  p r i n t e r  r e a d y
to operate with minimum warm-up time. Select a...