Electrolux Esl 68060 User Manual

							user manual
bruksanvisning
manual de instrucciones
Dishwasher
Oppvaskmaskin
Lavavajillas
ESL 68060
 
						

							Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information    2
Product description    3
Control panel    4
Display    6
First use    6
Set the water softener    6
Use of dishwasher salt    7
Use of rinse aid    8
Daily use    9
Loading cutlery and dishes    10
Use of detergent    14
Multitab function    15Select and start a washing programme
 15
Unloading the dishwasher    16
Washing programmes    16
Care and cleaning    18
What to do if...    19
Technical data    20
Hints for test institutes    21
Installation    22
Water connection    22
Electrical connection    24
Environment concerns    24
  Subject to change without notice
 Safety information
In the interest of your safety and to en-
sure the correct use, before installing
and first using the appliance, read this
user manual carefully, including its hints
and warnings. To avoid unnecessary
mistakes and accidents, it is important
to ensure that all people using the appli-
ance are thoroughly familiar with its op-
eration and safety features. Save these
instructions and make sure that they re-
main with the appliance if it is moved or
sold, so that everyone using it through
its life will be properly informed on appli-
ance use and safety.
Correct use
• This dishwasher is only intended for wash-
ing household utensils suitable for ma-
chine washing.
• Do not put any solvents in the dishwasher.
This could cause an explosion.
• Knives and other items with sharp points
must be loaded in the cutlery basket with
their points down or placed in a horizontal
position in the upper basket.
• Only use products (detergent, salt and
rinse aid) suitable for dishwashers.
• Avoid opening the door whilst the appli-
ance is in operation, hot steam may es-
cape.• Do not take any dishes out of the dish-
washer before the end of the washing cy-
cle.
• After use, isolate the appliance from the
power supply and turn off the water sup-
ply.
• This product should be serviced only by an
authorized service engineer, and only gen-
uine spare parts should be used.
• Under no circumstances should you at-
tempt to repair the machine yourself. Re-
pairs carried out by inexperienced persons
could cause injury or serious malfunction-
ing. Contact your local Service Force Cen-
tre. Always insist on genuine spare parts.
General safety
• Persons (including children) with reduced
physical sensory, mental capabilities or
lack of experience and knowledge must
not use the appliance. They must have su-
pervision or instruction for the operation of
the appliance by a person responsible for
their safety.
• Dishwasher detergents can cause chemi-
cal burns to eyes, mouth and throat. Could
endanger life! Comply with the safety in-
structions of the dishwasher detergent
manufacturer.
• Water in the dishwasher is not for drinking
purposes. Detergent residue may still be
present in your machine.
2  electrolux
 
						

							• Ensure that the door of the dishwasher is
always closed when it is not being loaded
or unloaded. In this way you will avoid any-
body tripping over the open door and hurt-
ing themselves.
• Do not sit or stand on the open door.
Child safety
• This appliance is designed to be operated
by adults. Children must be supervised to
ensure that they do not play with the ap-
pliance.
• Keep all packaging well away from chil-
dren. There is a risk of suffocation.
• Keep all detergents in a safe place out of
children’s reach.
• Keep children well away from the dish-
washer when the door is open.
Installation
• Check your dishwasher for any transport
damage. Never connect a damaged ma-
chine. If your dishwasher is damaged con-
tact your supplier.• All packaging must be removed before
use.
• Any electrical and plumbing work required
to install this appliance must be carried out
by a qualified and competent person.
• For safety reasons it is dangerous to alter
the specifications or attempt to modify this
product in any way.
• Never use the dishwasher if the electrical
supply cable and water hoses are dam-
aged; or if the control panel, work top or
plinth area are damaged such that the in-
side of the appliance is freely accessible.
Contact your local Service Force centre, in
order to avoid hazard.
• All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
Warning! For electrical and water
connection carefully follow the
instructions given in the specific
paragraphs.
Product description
1Upper basket
2Water hardness dial
3Salt container
4Detergent dispenser
5Rinse aid dispenser
6Rating plate
7Filters
8Lower spray arm
electrolux  3
 
						

							9Upper spray arm
This dishwasher has an internal light that
turns on when the door opens and off
when it closes.
Internal light equipped with led lamp
CLASS 1 in accordance with EN
60825-1: 1994 + A1:2002 + A2:2001.
In case this light has to be replaced
please contact your local Service Force
Centre.
Optical signal
Once the washing programme starts, a
point-shaped optical signal shows on the
floor beneath the appliance door.If you install the appliance higher up with a
furniture door mounted flush, the optical sig-
nal can no longer be seen.
Optical signal
Red light fixedIndicates the running of a wash-
ing programme. Comes on
when the programme starts.
Goes off once the programme
has ended.
Red light
flashingIndicates a malfunction of the
appliance.
Green light
fixedIndicates the end of the wash-
ing programme.
Control panel
In this fully integrated appliance the con-
trols are located on the top of the door.
When operating with the controls the
door needs to be open.
1. On/off button
2. Scroll buttons (+ -)
3. Display
4. Ok/start button (OK START)
5. Option button (OPTION)
Messages in the display and audible sig-
nals will help you to operate with the ap-
pliance.
Scroll buttons (+ -)
These two buttons have a double function:
• set a washing programme,
• set options.
Ok/Start button
Is necessary to:
• confirm / memorize any option,
• start a washing programme.
Ok/Start button and option button if
pressed simultaneously can:• cancel a washing programme in pro-
gress,
• cancel an option.
It is also possible to return to the factory set-
ting for the following options:
LANGUAGE
BRIGHTNESS
In setting mode press for about 6 seconds
these 2 buttons simultaneously; the default
language message will appear in the display.
Option button
Press this button to enter a menu of options;
press again to exit from the menu.
How to set the options
1. Press the option button.
2. Press one of the scroll buttons until the
display shows the required option
– SAVE ENERGY
– DELAY START
–SETTINGS
– MULTITAB
3. Press the Ok/Start button to confirm and
enter submenu.
4. Press one of the scroll buttons until the
display shows the required submenu.
4  electrolux
 
						

							5. Press the Ok/Start button to confirm.
6. To exit from menu options press the op-
tion button.
Switching on for the first time - setting
the language
1. Press the on/off button.
2. In the display appears the default lan-
guage message. If you want to confirmthe default language press the Ok/Start
button.
3. If you want to set a different language use
the scroll buttons until the required lan-
guage appears in the display. Press the
Ok/Start button to confirm.
Menu optionsSubmenu
DELAY STARTAllows the start of the selected washing programme to be de-
layed for between 1 and 19 hours. The countdown will decrease
with steps of 1 hour. Only in the last hour the decrease is in mi-
nutes. Once the countdown has elapsed the washing pro-
gramme will start automatically.
SAVE ENERGYThis function decreases the temperature in the drying phase.
Energy saving is between 10% and 25%.
You can set this function with all washing programmes. The re-
lated symbol comes on.
This function has no effect on some programmes. Refer to
Washing programmes for more details.
Dishes can be wet at the end of the programme. In this condition
we recommend, to open the dishwasher door and keep it ajar
and let dishes dry naturally.
– ON - function activated. The corresponding symbol shows in
the display.
– OFF - function deactivated.
MULTITABSets the dishwasher for the use of combi detergent tablets. Refer
to Multitab function.
– ON - function activated. The multitab symbol shows in the
display.
– OFF - function deactivated.
SETTINGSL A N G U A G E  -  A l l o w s  t o  v i e w  m e s sages in the required language.
 BRIGHTNESS - allows to increase or decrease the brightness of
the background of the display.
10 different levels can be selected.
Factory setting: level 10.
 SOUND VOLUME - allows to adjust the volume of the audible
signals (from 0 to 5).
Level 0 means the deactivation of the audible signals. The cor-
responding symbol shows in the display.
 RINSE AID - allows to activate or deactivate the rinse aid dis-
penser, only when multitab function is active.
– ON - activated
– OFF - deactivated
 WATER HARDNESS - allows to set electronically the water soft-
ener.
electrolux  5
 
						

							Display
1The little bars show the progress of the washing programme.
2Messages show in this part of the display.
3Symbols
Symbols
DELAY START - symbol flashes when countdown is in progress.
MULTITAB - comes on when the function is active.
SAVE ENERGY - comes on when the function is set.
SOUND VOLUME - comes on when the audible signals are deactivated.
First use
Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: 3 in 1, 4 in 1, 5 in
1 etc. set the multitab function. (Re-
fer to Multitab function).
Set the water softener
The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.
6  electrolux
 
						

							Setting manually
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish-
washer.
3. Turn the water hardness dial to position
1 or 2 (see chart).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
Enter Option menu - SETTINGS - WATER
HARDNESS.
Use the scroll buttons to set the level of the
water softener, according to the hardness of
the water in your area. Refer to the chart.
Water hardnessAdjusting the water hardness settingUse of
salt
°dH°THmmol/lmanuallyelectronically
51 - 7091 - 1259,1 - 12,52level 10yes
43 - 5076 - 907,6 - 9,02level 9yes
37 - 4265 - 756,5 - 7,52level 8yes
29 - 3651 - 645,1 - 6,42level 7yes
23 - 2840 - 504,0 - 5,02level 6yes
19 - 2233 - 393,3 - 3,92level 5yes
15 - 1826 - 322,6 - 3,21level 4yes
11 - 1419 - 251,9 - 2,51level 3yes
4 - 107 - 180,7 - 1,81level 2yes
< 4< 7< 0,71level 1no
Use of dishwasher salt
Warning!
Only use salt specifically designed for use in
dishwashers. All other types of salt not spe-
cifically designed for use in a dishwasher, es-
pecially table salt, will damage the water soft-
e n e r .  O n l y  f i l l  w i t h  s a l t  j u s t  b e f o r e  s t a r t i n g  o n e
of the complete washing programmes. This
will prevent any grains of salt or salty water,
which may have been spilt, remaining on the
bottom of the machine for any period of time,
which may cause corrosion.To fill:
1. Open the door, remove the lower basket
and unscrew the cap of the salt container
by turning it anticlockwise.
2. Pour 1 litre of water into the container
(this is necessary only before filling
with salt for the first time)  .
3. Using the funnel provided, pour in the salt
until the container is full.
electrolux  7
 
						

							4. Replace the cap making sure that there
is no trace of salt on the screw thread or
on the gasket.
5. Replace the cap tightly turning it clock-
wise until it stops with a click.
Do not worry if water overflows from the
unit when filling with salt, this is quite
normal.
The salt container will require topping up pe-
riodically.
The display shows a message when the salt
container is empty.
This occurs only at the start and at the end
of the washing programme; during the run-
ning of the programme the indication for salt
refilling is not active.
The refilling salt message can remain
visible for a few hours after the salt has
been replenished, assuming the appli-
ance remains switched on. If you are us-
ing salt that takes longer to dissolve then
this can take longer. The operation of the
appliance is not affected.
Use of rinse aid
Warning! Only use branded rinse aid for
dishwashers.
Never fill the rinse aid dispenser with any
other substances (e.g. dishwasher
cleaning agent, liquid detergent). This
would damage the appliance.
Rinse aid ensures thorough rinsing, and
spot and streak free drying.
Rinse aid is automatically added during
the last rinse.
1. Open the container by pressing the re-
lease button (A).
2. Add the rinse aid in the container. The
maximum level for filling is indicated by
max.
The dispenser holds about 110 ml of rinse
aid, which is sufficient for between 16 and
40 washing cycles, depending upon the
dosage setting.
3. Ensure that the lid is closed after every
refill.
Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid excess
foaming during the next wash.
8  electrolux
 
						

							According to the finish and drying results ob-
tained, adjust the dose of rinse aid by means
of the 6 position selector (position 1 minimum
dosage, position 6 maximum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of water
or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks
on the dishes or a bluish film on glassware or
knife blades.The rinse aid container will require topping up
periodically.
The display shows a message when the rinse
aid container is empty.
This happens only at the start and at the end
of the washing programme; during the run-
ning of the programme the indication for rinse
aid refilling is not active.
Daily use
• Check if it’s necessary to refill with dish-
washer salt or rinse aid.
• Load cutlery and dishes into the dishwash-
er.
• Fill with dishwasher detergent.
• Select a wash programme suitable for the
cutlery and dishes.
• Start the wash programme.
Helpful hints and tips
Sponges, household cloths and any object
that can absorb water may not be washed in
the dishwasher.
• Before loading the dishes, you should:
– Remove all left over food and debris.
– Soften remnants of burnt food in pans
• When loading the dishes and cutlery,
please note:
– Dishes and cutlery must not impede the
rotation of the spray arms.– Load hollow items such as cups,
glasses, pans, etc. with the opening
downwards so that water cannot collect
in the container or a deep base.
– Dishes and items of cutlery must not lie
inside one another, or cover each other.
– To avoid damage to glasses, they must
not touch.
– Lay small objects in the cutlery basket.
• Plastic items and pans with non stick coat-
ings have a tendency to retain water
drops; these items will not dry as well as
porcelain and steel items.
• Light items (plastic bowls etc.) must be
loaded in the upper basket and arranged
so they do not move.
electrolux  9
 
						

							For washing in the dishwasher the following cutlery and dishes
are not suitable:are of limited suitability:
• Cutlery with wooden, horn, china or mother-of-
pearls handles.
• Plastic items that are not heat resistant.
• Older cutlery with glued parts that are not tem-
perature resistant.
• Bonded cutlery items or dishes.
• Pewter or copper items.
• Lead crystal glass.
• Steel items prone to rusting.
• Wooden platters.
• Items made from synthetics fibres.• Only wash stoneware in the dishwasher if it is
specially marked as being dishwasher-safe by
the manufacturer.
• Glazed patterns may fade if machine washed
frequently.
• Silver and aluminium parts have a tendency to
discolour during washing: Residues, e.g. egg
white, egg yolk and mustard often cause dis-
colouring and staining on silver. Therefore al-
ways clean left-overs from silver immediately, if
it is not to be washed straight after use.
Loading cutlery and dishes
The lower basket
The lower basket is designed to take sauce-
pan, lids, plates, salad bowls, cutlery etc.
Service dishes and large lids should be ar-
ranged around the edge of the basket, en-
suring that the spray arms can turn freely.
The rows of prongs in the lower basket can
lie flat to allow you to load pots, pans and
bowls.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard. Long
and/or sharp items of cutlery such as
carving knives must be positioned
horizontally in the upper basket. Take
care when loading or unloading sharp
items such as knives.
Forks and spoons should be placed in the
removable cutlery basket with the handles
facing downwards and the knives with their
handles facing upwards.
10  electrolux