Eiki Projector Lc Wxl200a User Manual

							81
The projector is detecting abnormal condition .
Indicators
Projector ConditionPOWER
green
LAMP 
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER
 blue
 LAMPREPLACE
orange
If the Filter counter reached a time set in the timer setting, a Filter \
replacement icon (Fig.2) appears on the screen and the WARNING 
FILTER indicator on the top panel lights up. Replace the filter as 
soon as possible. If the filter is out of scroll and the projector reach\
es 
a time set in the timer setting, Fig. 3 appears on the screen and the 
WARNING FILTER indicator lights up. Replace the filter cartridge as 
soon as possible.
If the filter is clogged and no scroll is left in the filter cartridge, \
a Filter 
cartridge replacement icon (Fig.4) appears on the screen and the 
WARNING FILTER indicator lights up. Replace the filter cartridge as 
soon as possible.
Note:   Fig.2,	Fig.3	and	Fig.4	icon	will	not	appear	when	the	Display	function	is 	set	to	Off	(p.52)	or	during	“Freeze” (p.30).
The filter cartridge is not installed in the projector. Check the filter 
compartment to see if the filter cartridge is installed in the projector\
. 
When the filter cartridge is installed and the indicators continue to 
light and blink, read the column below.
The projector detects an abnormal condition and cannot be turned 
on. Unplug the AC power cord and plug it again to turn on the 
projector. If the projector is turned off again, unplug the AC power 
cord and contact the dealer or the service center. Do not leave the 
projector on. It may cause an electric shock or a fire hazard.
The shutter is out of control. 
The shutter is out of control. (The projector is in the cooling mode.)\
The shutter is out of control. (The projector is in the stand-by mode.)\
 
In that case, contact the service center immediately.
Fig .2   Filter replacement icon
Fig .4   Filter cartridge replacement icon
Fig .3
Appendix
❖









❊
❊
❊
❖
❖
 
						

							82
ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
VGA 1640x48031.470 59.880 
VGA 2720x40031.470 70.090 
VGA 3640x40031.470 70.090 
VGA 4640x48037.860 74.380 
VGA 5640x48037.860 72.810 
VGA 6640x48037.500 75.000 
VGA 7640x48043.269 85.000 
MAC LC13640x48034.970 66.600 
MAC 13640x48035.000 66.670 
480p640x48031.470 59.880 
575p768x57531.250 50.000 
575i768x576(Interlace)15.62550.000 
480i640x480(Interlace)15.73460.000
SVGA 1800x60035.156 56.250 
SVGA 2800x60037.880 60.320 
SVGA 3800x60046.875 75.000 
SVGA 4800x60053.674 85.060 
SVGA 5800x60048.080 72.190 
SVGA 6800x60037.900 61.030 
SVGA 7800x60034.500 55.380 
SVGA 8800x60038.000 60.510 
SVGA 9800x60038.600 60.310 
SVGA 10800x60032.700 51.090 
SVGA 11800x60038.000 60.510 
MAC 16832x62449.720 74.550 
XGA 11024x76848.360 60.000 
XGA 21024x76868.677 84.997 
XGA 31024x76860.023 75.030 
XGA 41024x76856.476 70.070 
XGA 51024x76860.310 74.920 
XGA 61024x76848.500 60.020 
XGA 71024x76844.000 54.580 
XGA 81024x76863.480 79.350 
XGA 91024x768(Interlace)36.00087.170
XGA 101024x76862.040 77.070 
XGA 111024x76861.000 75.700 
XGA 121024x768(Interlace)35.52286.960
XGA 131024x76846.900 58.200 
XGA 141024x76847.000 58.300 
XGA 151024x76858.030 72.000 
MAC 191024x76860.240 75.080 
SXGA 11152x86464.200 70.400 
SXGA 21280x102462.500 58.600 
SXGA 31280x102463.900 60.000 
SXGA 41280x102463.340 59.980 
SXGA 51280x102463.740 60.010 
SXGA 61280x102471.690 67.190 
SXGA 71280x102481.130 76.107 
SXGA 81280x102463.980 60.020 
SXGA 91280x102479.976 75.025 
SXGA 101280x96060.000 60.000 
SXGA 111152x90061.200 65.200 
SXGA 121152x90071.400 75.600 
ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
SXGA 131280x1024(Interlace)50.00086.000
SXGA 141280x1024(Interlace)50.00094.000
SXGA 151280x102463.370 60.010 
SXGA 161280x102476.970 72.000 
SXGA 171152x90061.850 66.000 
SXGA 181280x1024(Interlace)46.43086.700
SXGA 191280x102463.790 60.180 
SXGA 201280x102491.146 85.024 
SXGA+ 11400x105063.970 60.190 
SXGA+ 21400x105065.350 60.120 
SXGA+ 31400x105065.120 59.900 
SXGA+ 41400x105064.03060.010
SXGA+ 51400x105062.50058.600
SXGA+ 61400x105064.74459.948
SXGA+ 71400x105065.31759.978
MAC 211152x87068.680 75.060 
MAC1280x96075.000 75.080 
MAC1280x102480.000 75.080 
WXGA 11366x76848.360 60.000 
WXGA 21360x76847.700 60.000 
WXGA 31376x76848.360 60.000 
WXGA 41360x76856.160 72.000 
WXGA 61280x76847.776 59.870 
WXGA 71280x76860.289 74.893 
WXGA 81280x76868.633 84.837 
WXGA 91280x80049.600 60.050 
WXGA 101280x80041.200 50.000 
WXGA 111280x80049.70259.810
WXGA 121280X80063.980 60.020
WUXGA 11920x120074.55659.885
WUXGA 21920x120074.03859.950
WSXGA +11680x105065.29059.954
WXGA +11440x90055.93559.887
WXGA +21440x90074.91860.000
UXGA 11600x120075.000 60.000 
UXGA 21600x120081.250 65.000 
UXGA 31600x120087.500 70.000 
UXGA 41600x120093.750 75.000 
UXGA 51600x1200106.25085.000
720p1280x72045.000 60.000 
720p1280x72037.50050.000 
1035i1920x1035(Interlace)33.75060.000
1080i1920x1080(Interlace)33.75060.000
1920x1080(Interlace)28.125 50.000 
1080p
1920x108033.75030.000
1920x108028.12525.000
1920x108027.00024.000
1920x108067.500060.000
1920x108056.25050.000
1080psf/301920x108033.75060.000
1080psf/251920x108028.12550.000
1080psf/241920x108027.00048.000
Basically this projector can accept the signal from all computers with t\
he V- and H-Frequency mentioned below and less than 
140 MHz of Dot Clock. When the input signal is Analog, refer to the chart below.
Appendix







Compatible Computer Specifications






Note:
 True cannot	be	selected	when	is	selected.	(p.42) 
						

							83
Appendix
When the input signal is digital from HDMI terminal, refer to the chart \
below.
Note:
•Depending	on	the	condition	of	signals	and	the	type	and	length	of	cables,	these	signals	may	not	be	properly	viewed.•Specifications	are	subject	to	change	without	notice.•You	might	be	able	to	project	images	even	when	signals	other	than	above	are	inputted,	however	the	functions	of	the
	projector	could	be	limited.•Depending	on	your	PC	settings,	the	digital	signals	of	your	PC	may	not	be	projected	correctly.	In	such	a	case,	confirm	your	PC	settings.•When	you	project	a	DVI	signal,	connect	the	cables,	turn	the	projector	on,	then	select	the	input.	Finally,	turn	on	your	PC.	Be	sure	to	follow	this	procedure,	otherwise	an	image	may	not	be	projected	on	the	screen.	If	an	image	is	not	projected	correctly,	restart	your	PC.•Do	not	disconnect	the	cable	while	the	projector	is	running.	If	the	cable	has	been	disconnected	and	then	reconnected,	an	image	may	not	be	correctly	projected.
This symbol on the nameplate 
means the product is Listed 
by Underwriters Laboratories 
Inc. It is designed and 
manufactured to meet rigid U.L. 
safety standards against risk 
of fire, casualty and electrical 
hazards.
The CE Mark is a Directive conformity 
mark of the European Community (EC).
ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
D-VGA640x48031.470 59.940 
D-480p720x48031.470 59.880 
D-575p720x57531.250 50.000 
D-SVGA800x60037.879 60.320 
D-XGA1024x76848.363 60.000 
D-WXGA 11366x76848.360 60.000 
D-WXGA 21360x76847.700 60.000 
D-WXGA 31376x76848.360 60.000 
D-WXGA 41360x76856.160 72.000 
D-WXGA 51366x76846.500 50.000 
D-WXGA 61280x76847.776 59.870 
D-WXGA 71280x76860.289 74.893 
D-WXGA 81280x76868.63384.837
D-WXGA 91280x80049.600 60.050 
D-WXGA 101280x80041.200 50.000 
D-WXGA 111280x80049.70259.810
D-WXGA 121280x80063.980 60.020 
D-SXGA 11280x102463.98060.020
D-SXGA 21280x102460.27658.069
D-SXGA+ 11400x105063.97060.190
D-SXGA+ 21400x105065.35060.120
D-SXGA+ 31400x105065.12059.900
D-SXGA+ 41400x105064.03060.010
D-SXGA+ 51400x105062.50058.600
D-SXGA+ 61400x105064.74459.948
D-SXGA+ 71400x105065.31759.978
D-UXGA1600x120075.00060.000
D-WUXGA 21920 x 120074.03859.950
D-WSXGA+ 11680 x 105065.29059.954
D-WXGA+ 11440x90055.93559.887
ON-SCREEN DISPLAyRESOLUTIONH-Freq . (kHz)V-Freq .(Hz)
D-720p1280x72045.000 60.000 
D-720p1280x72037.500 50.000 
D-1035i1920x1035(Interlace)33.75060.000
D-1080i1920x1080(Interlace)33.75060.000
1920x1080(Interlace)28.12550.000
D-1080psf/301920x108033.750 60.000 
D-1080psf/251920x108028.125 50.000 
D-1080psf/241920x108027.000 48.000 
D-1080p
1920x108033.75030.000
1920x108028.12525.000
1920x108027.00024.000
1920x108067.50060.000
1920x108056.25050.000
D-480i720 x 480----59.94/60
D-575i720 x575----50.00
D-480p720 x 480----59.94/60
D-575p720 x575----50.00
D-720p1280 x 720----59.94/60
D-720p1280 x 720----50.00
D-1080i1920 x 1080----59.94/60
D-1080i1920 x 1080----50.00
D-1080p1920 x 1080----59.94/60
D-1080p1920 x 1080----50.000
D-1080p1920 x 1080----24.000
Licensed under USP 5,717,422 USP 6,816,141 
						

							84
Mechanical Information 
 Projector Type  Multi-media Projector 
 Dimensions (W x H x D)  LC-WXL200AL  : 19.25” x 6.46” x 14.61” (489.5 mm x 164.0 mm x 371.1 mm)                                                                                                                                                   
                                                                             LC-WXL200A    : 19.25” x 6.46” x 17.12” (489.5 mm x 164.0 mm x 434.8 mm)  
 Net Weight                                                        LC-WXL200AL\
  : 19.8 lbs (9.0 kg)                                                                                                                                              
                                                                             LC-WXL200A    :  21.6 lbs (9.8 kg)    
 Feet Adjustment  0˚ to 4˚      
Panel Resolution 
 LCD Panel System  0.75” TFT Active Matrix type, 3 panels  
 Panel Resolution  1,280 x 800 dots 
 Number of Pixels  3,072,000 (1,280 x 800 x 3 panels)       
Signal Compatibility 
 Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N 
 SD/HD TV Signal  480i, 480p, 575i, 575p, 720p, 1035i, 1080i and 1080p 
 Scanning Frequency  H-sync. 15 kHz–100 kHz, V-sync. 48 Hz–100 Hz     
Optical Information 
 Projection Image Size (Diagonal)  Adjustable from 40” to 400” (LC-WXL200A) 
 Throw Distance 4.5' (1.4m) - 80.1' (24.4m) (LC-WXL200A)           
 Projection Lens F1.7–2.3 lens with f=26.9 mm–45.4 mm with motor zoom and focus  
                                                                        \
     (LC-WXL200A)                                                                                                                                       
 Projection Lamp  330 W NSHA lamp                 
Interface
 Input 1  HDMI/D-sub15pin(RGB, RGB Scart) 
 Input 2  BNC Type x 5 (G or Video/Y, B or Pb-Cb, R or Pr-Cr, H/HV and V) 
 Input 3  RCA Type x 3 (Video/Y, Pb/Cb,Pr/Cr), Mini DIN 4 pin x 1 (S-video) 
 Analog Out Analog RGB (Mini D-sub 15 pin) Terminal x 1 
 Audio Out  Audio (Mini Type stereo) x 1 (Variable) 
 Audio In 1/2  Audio (Mini Type stereo) x 1 
 Audio In 3   RCA Type x 2 
 R/C Jack  Mini jack (Wired Remote) x 1 
 Control Port  D-sub 9 pin x 1  
 USB Connector   USB Series B x 1 
 Option  Pj-to NetDirector Terminal x 1 
 LAN Connection Terminal  RJ-45                                                                                                                                           
Audio
 Internal Audio Amp   7.0 W RMS 
 Built-in Speaker  1 speaker, ø1.46" (37mm) 
Power
 Voltage and Power Consumption  AC 100–120 V (5.2A Max.), 50/60 Hz (The U.S.A and Canada) 
    AC 100-240 V (5.2-2.5A Max.), 50/60Hz (For other countries)  
Operating Environment
 Operating Temperature  41˚F–104˚F (5˚C–40˚C) 
 Storage Temperature  14˚F–140˚F (-10˚C–60˚C) 
Remote Control 
 Battery  AAA or LR03 Type x 2           
 Operating Range  16.4’ (5 m/±30˚) 
 Dimensions  1.9” (W) x 1.1” (H) x 5.7” (D) (48 mm x 27 mm x 145 mm)       
 Net Weight  3.6 oz (102 g) (including batteries) 
Accessories
 Owner’s Manual (CD-ROM)  Remote Control and Batteries 
 AC Power Cord                                                 Lens Cap (for LC-WXL200A) 
 PIN Code Label                                                 Lens Mount Cover (for LC-WXL200AL) 
 VGA Cable      Lens Antitheft screw *   Wired remote cable Network Application (CD-ROM)
 Quick Reference Guide    
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are ef fective, a tiny fraction of the 
pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Appendix
Technical Specifications
* Contact the dealer where you purchased   the projector or the service center about the   Lens Antitheft Screw. 
						

							85
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide variety of uses.For installation and replacement of the lens, always contact the sales d\
ealer. The projector lens must be installed or replaced by well-trained sales or service engineers. Do not attempt to install an\
d replace the lens by yourself as it may cause injury.
Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector. 
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System 
Industries Association). The projector supports all commands defined by PJLink Class 1 and is ver\
ified conformance with 
PJLink Standard Class 1.
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
To the sales and service engineers:
For the lens replacement and lens installation, refer to the installatio\
n manual of the optional lens. Before replacing and 
installing the lens, make sure that you are using the lens with the corr\
ect Type No.
The parts listed below are optionally available. When ordering those par\
ts, specify the item name and Model No. to the sales 
dealer.
Appendix
Optional Parts
Pj Link Notice
Lens Replacement
     Model No.
Standard Zoom Lens     : AH-24741
Long Zoom Lens   : AH-24771
Ultra Long Zoom Lens     : AH-24781
 Short Zoom Lens   : AH-24711 
Short Fixed Lens    : AH-24721 
SCART-VGA Cable    : AH-98881 
Pj-to NetDirector     : PjNET-50
Projector InputPJLink InputParameter
Input 1RGB (PC analog)RGB 111
RGB (Scart)RGB 212
HDMIDIGITAL 333
Input 2VideoVIDEO 121
Y, Pb/Cb,Pr/CrVIDEO 222
RGBRGB 313
Input 3VideoVIDEO 323
Y, Pb/Cb,Pr/CrVIDEO 424
S-videoVIDEO 525
Input 4NetworkNETWORK 151 
						

							86
ANALOG/ ANALOG OUT (Mini D-sub 15 pin)
512341096781514131112
CONTROL PORT CONNECTOR (D-sub 9 pin)
-----
R X D
T X D
-----
SG
-----
RTS
CTS
Serial
1
2
3
4
5
6
7
8
Vcc
- Data
+ Data
Ground
1
2
3
4
USB CONNECTOR (Series B)
Appendix
-----9
Red Input
Ground (Horiz.sync.)
Green Input
No Connect
Blue Input
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
Horiz. sync. Input (Composite H/V sync.)
Ground (Vert.sync.)
 DDC Data
Ground
Vert. sync. Input
 DDC Clock
9
13
10
12
11
14
15
+5V Power
Red Output
Ground (Horiz.sync.)
Green Output
No Connect
Blue Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
Horiz. sync. Output 
Ground (Vert.sync.)
No Connect
No Connect
Vert. sync. Output
No Connect
9
13
10
12
11
14
15
No Connect
Input
Output
Configurations of Terminals
RX –
TX +
TX –
RX +
2
3
4
5
6
7
8
1
LAN TERMINAL
-----
-----
----------
13579111315171918161412108642
TMDS Dat a 2+  Input
Ground (TMDS Dat a 1)
Ground (TMDS Data 2)
TMDS Data 1+ Input
TMDS Data 2- Input
TMDS Data 1- Input
TMDS Dat a 0+ Input
Ground (TMDS Dat a 0)
1
5
2
4
3
6
7
8
Ground (TMDS Clock)
SCL
TMDS Cloc k- Input
-----
-----
SDA
Ground (DDC/CEC)
11
1 5
12
14
13
16
17
TMDS Dat a 0- Input
TMDS Cloc k+ Input
9
10
Plug insert detection1 9
1 8+5V P ower
HDMI (19 Pin Type A) 
						

							87
Write down the PIN code number in the column below and keep it with this \
manual securely. If you forgot or lost 
the number and unable to operate the projector, contact the service center. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
* S h o u l d   t h e   f o u r - d i g i t   n u m b e r   b e 
changed,  the  factory  set  number  will 
be invalid.
Put the label below (supplied) on in a prominent place of 
the projector’s body while it is locked with a PIN code.
While the projector is locked with the PIN code...
PIN Code Lock No .
Logo PIN Code Lock No .
Appendix
PIN Code Number Memo 
						

							88
Appendix
Dimensions
Appendix
Unit: inch (mm)
3.31(84.0)
16.39(416.2)
6.46(164.0) 5.91(150.0) 19.27(489.5)
7.25(184.2)
3.34(84.7)
6.67(169.5)14.61(371.1)
6.25(158.8)
5.91(150.0)
6.89(175.0)
2.95(75.0) 1.18(30.0)
7.70(195.5)
3.78(96.0)
6.30(160.0)
17.12(434.8)
3.80(96.6)
4.34(1 10.3)
9.20(233.6)
4q
13.58(344.9)
Screw Holes for 
Ceiling Mount
Screw: M6
Depth: 0.393 (10.0) 
						

							89
Appendix
This projector provides a function to control and monitor the projector'\
s operations by using the RS-232C serial port.
Connect a RS-232C serial cross cable to CONTROL PORT 
on the projector and serial port on the PC.  (See p.19)
Launch a communication software provided with PC and 
setup the communication condition as follows:
1
2
3
Baud rate : 9600 / 19200 bps
Parity check : none
Stop bit   : 1
Flow control : none
Data bit   : 8
Type the command for controlling the projector and then enter 
the "Enter" key. 
Example
When you want to change the input to INPUT 2, Type 'C' '0' '6' 
'Enter'. 
Note:
   Enter with ASCII 64-byte capital characters and one-byte characters.
Note:
			The	default	of	the	baud	rate	is	set	to	
19200 bps.	If	an	error	occurs	in	the	
communication,	change	the	serial	port	and	
the	communication	speed	(baud	rate).
Serial Control Interface
Operation
List of Picture in Picture
 o : Picture in Picture combinations are enabled.
    x : Picture in Picture combinations are disabled.
Note:
  •  When the input signal(s) is/are incompatible, X mark will be displayed on the Main/Sub picture.
  •  Depending on the frequency or signal type of PC/AV input, the display resolution may be lowered or images may not be displayed on 
the Main/Sub picture.     
  •  Inputting PC analog signals: Between 100-140 MHz
     
  •  Inputting PC analog signals: More than 140MHz
  •  Inputting PC digital signals: More than 100MHz
  •  Inputting AV digital signals: 1080p     
  •  Inputting signal formats: SXGA20, WUXGA 1, WUXGA 2, WSXGA+ 1, WXGA+2, UXGA 1, UXGA 2, UXGA 3, UXGA4, D-1080p 
						

							90
The command is sent from PC to the projector with the 
format below;
     'C' [Command] 'CR'
       Command: two characters (refer to the command 
table below.
-The projector decodes the command and returns the 'ACK'   
 with the format below;
     'ACK'  'CR'
-When the projector can not decode the command, it returns  
 with format below.
     ‘?’  ‘CR’ 
Format
Appendix
Functional Execution Command
CommandFunction
C00Turn the projector ON
C01Turn the projector OFF 
(immediately OFF)
C02Turn the projector OFF
C05Select Input 1
C06Select Input 2
C07Select Input 3
C08Select Network
C09Volume +
C0AVolume -
C0BSound mute ON
C0CSound mute OFF
C0DVideo mute ON
C0EVideo mute OFF
C0FScreen Normal Size
C10Screen Full Size
C1CMenu ON
C1DMenu OFF
C20Brightness UP
C21Brightness DOWN
C23Select Input 2 Video
C24Select Input 2 Y, Pb/Cb,Pr/Cr 
C25Select Input 2 RGB
C28Direct on ON
C29Direct on OFF
C33Select Input 3 Video
C34Select Input 3 S-video
C35Select Input 3 Y, Pb/Cb,Pr/Cr 
CommandFunction
C3APointer RIGHT
C3BPointer LEFT
C3CPointer UP
C3DPointer DOWN
C3FEnter
C46Zoom DOWN
C47Zoom UP
C4AFocus DOWN
C4BFocus UP
C4FSelect Input 1 HDMI
C50Select Input 1 Analog RGB
C51Select Input 1 SCART
C5DLens shift UP
C5ELens shift DOWN
C5FLens shift LEFT
C60Lens shift RIGHT
C89Auto PC adj.
C8EKeystone UP
C8FKeystone DOWN
C90Keystone RIGHT
C91Keystone LEFT