Eiki Projector Lc Wxl200a User Manual

							 Network Supported        
Refer to the Owner's Manuals below for 
details about network function.
□   Network Set-up and Operation
□  PJ Network Manager
Multimedia Projector
Owner's Manual
LC-WXL200AMODEL
LC-WXL200AL
■ Lens is optional for the projectors that “L” follows in model numb\
er. 
						

							2
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. 
This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display 
(LCD) technology.
 ♦ Functionally Rich
 ♦ Multi-use Remote Control
Use the remote control as wired and wireless, or as 
a PC wireless mouse. Eight remote control codes 
and selectable pointer shapes are also available.
 ♦ Multilanguage Menu Display
Operation menu is available in 12 languages; 
English, German, French, Italian, Spanish, 
Portuguese, Dutch, Swedish, Russian, Chinese, 
Korean, and Japanese (p.51).
 ♦ Network-capable
- Through an optional Pj-to NetDirector, you can
 project an image on a computer as well as
 operate and manage the projector via network.
- This projector is loaded with the Wired function.  
  You can use the Crestron RoomView® and AMX   
  Device Discovery. You can manage the projector  
  via network. For details, refer to the owner’s 
  manual “Network Setup and Operation.”
 ♦ Logo Function
This projector has many useful functions such 
as lens shifting, ceiling and rear projection, 
perpendicular omnidirectional projection, variety of 
lens options, etc.
Note:
 •	The	On-Screen	Menu	and	figures	in	this	manual	may	differ	slightly	from	the	product.
	 •	The	contents	of	this	manual	are	subject	to	change	without	notice.
Features and Design
 ♦ Simple Computer System Setting
The projector has the Multi-scan system to conform 
to almost all computer output signals quickly (p.36). 
Supported resolution up to WUXGA.
 ♦ Useful Functions for Presentation
Digital zoom function allows you to focus on the 
crucial information during a presentation (pp.29, 
43).
 ♦ Security Function
The Security function helps you to ensure security 
of the projector. With the Key lock function, you can 
lock the operation on the side control or remote 
control (p.61). PIN code lock function prevents 
unauthorized use of the projector (pp.61-62).
 ♦ Automatic Filter Replacement Function
The  projector  monitors  the  condition  of  the  filter 
and  replaces  a  filter  automatically  when  it  detects 
the clogging.
 ♦ Motor-driven Lens Shift
Projection lens can be moved up, down, right and 
left with the motor-driven lens shift function. This 
function makes it easy to provide projected image 
where you want. Zoom and focus can also be 
adjusted with a motor-driven operation (p.17).
 ♦ Power Management
The  Power  management  function  reduces  power 
consumption and maintains lamp life (p.59).
 ♦ Multiple Interface Terminals
The  projector  has  several  interface  terminals  that 
can support various types of equipment and signals 
(p.11).
The Logo function allows you to customize the 
screen logo (pp.52-54). You can capture an image 
for the screen logo and use it for the starting-up 
display or between presentations.
 ♦ Pointer Function
Remote control pointer function. This function helps 
you to make a smart presentation on a projected 
screen.
 ♦ Shutter Function
The projector is equipped with the shutter that 
provides complete blackness when the projected 
image is not needed with keeping the projector on. 
The shutter management function allows you to set 
the timer. It prevents from keeping the projector on 
when the shutter is closed for a long time (p.63).
 ♦ Corner Correction
With the "Horizontal and vertical keystone correction 
function" and "Corner keystone correction function" 
of this projector, you can correct the keystone 
distortion even when projecting from the diagonal to 
the screen (pp.31, 44, 50).
 ♦ Picture in Picture Function
This projector is capable of projecting two images
simultaneously by using either built-in P in P mode 
or P by P mode (pp.55-56). 
						

							3
Table of Contents
Features and Design  . . . . . . . . . . . . . . .2
Table of Contents . . . . . . . . . . . . . . . . . .3
To The Owner  . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Directions 7
Moving the Projector 8
Cautions in Handling the Projector 8
Compliance . . . . . . . . . . . . . . . . . . . . . . .9
Part Names and Functions   . . . . . . . . .10
Front  10
Back 10
Bottom 10
Rear Terminal  11
Side Control and Indicators 12
Remote Control 13
Remote Control Battery Installation 15
Remote Control Receivers and Operating Range 15
Wired Remote Control Transmitter 15
Remote Control Code 16
Adjustable Feet 16
Installation . . . . . . . . . . . . . . . . . . . . . . .17
Positioning the Projector 17
Lens Shift Adjustment 17
Lens Installation 18
Connecting to a Computer (Digital and Analog RGB) 19
Connecting to Video Equipment  
(Video, S-video, HDMI)   20
Connecting for Audio Signal  21
Connecting the AC Power Cord 22
Basic Operation  . . . . . . . . . . . . . . . . . .23
Turning On the Projector  23
Turning Off the Projector 24
How to Operate the On-Screen Menu 25
Main Menu 26
Operating with Projector Control 27
Sound Adjustment 28
Operating with Remote Control 29
Keystone Correction 31
Pointer Function 32
Wireless Mouse Operation 32
Input Selection  . . . . . . . . . . . . . . . . . . .33
Direct Operation  33
Computer Input Source Selection 34
Video Input Source Selection 35
Computer Input . . . . . . . . . . . . . . . . . . .36
Computer System Selection 36
Auto PC Adjustment 37
Manual PC Adjustment 38
Image Level Selection 40
Image Adjustment 41
Screen Size Adjustment 42
Video Input  . . . . . . . . . . . . . . . . . . . . . .45
Video System Selection  45
Image Level Selection 46
Image Adjustment 47
Screen Size Adjustment 49
Setting . . . . . . . . . . . . . . . . . . . . . . . . . .51
Setting 51
Maintenance and Care . . . . . . . . . . . . .66
Filter Instructions 66
Replacing the Filter Cartridge 67
Resetting the Filter Counter 68
Resetting the Scroll Counter 68
Lamp Replacement 69
Cleaning the Projection Lens 71
Cleaning the Projector Cabinet 71
Warning Indicators 72
Appendix . . . . . . . . . . . . . . . . . . . . . . . .73
Troubleshooting 73
Menu Tree 76
Indicators and Projector Condition 79
Compatible Computer Specifications 82
Technical Specifications 84
Optional Parts 85
Lens Replacement 85
PJ Link Notice 85
Configurations of Terminals 86
PIN Code Number Memo 87
Dimensions 88
List of Picture in Picture 89
Serial Control Interface 89
Trademarks
Each name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective corporation. 
						

							4
 Safety Precaution
WARNING:  ● THIS APPARATUS MUST BE EARTHED .
 ●  TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE 
THIS APPLIANCE TO RAIN OR 
MOISTURE .
– This projector produces intense light from the projection 
lens. Do not stare di      rectly into the lens, otherwise eye 
damage could result. Be especially careful that children do 
not stare directly into the beam.
– Install the projector in a proper position. Otherwise it may 
result in a fire hazard.
– Allowing the proper amount of space on the top, sides, 
and rear of the projector cabinet is critical for proper air 
circulation and cooling of the unit. The diagrams shown 
here indicate the minimum space required. If the projector 
is to be built into a compartment or similarly enclosed, 
these minimum distances must be maintained.
– Do not cover the ventilation slots on the projector. Heat 
build-up can reduce the service life of your projector, and 
can also be dangerous.
– If the projector is unused for an extended time, unplug the 
projector from the power outlet.
– Do not project the same image for a long time. The 
afterimage may remain on the LCD panels by the 
characteristic of panel.
 
CAUTION ON HANGING FROM THE CEILING
DO NOT SET THE PROjECTOR IN GREASy, WET , 
OR SMOKy CONDITIONS SUCH AS IN A KITCHEN 
TO PREVENT A BREAKDOWN OR  A DISASTER . IF 
THE PROjECTOR COMES IN CONTACT WITH OIL  OR 
CHEMICALS, IT MAy BECOME DETERIORATED .
To The Owner
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER 
(OR BACK) . NO USER-SERVICEABLE 
PARTS INSIDE EXCEPT LAMP 
REPLACEMENT .  REFER SERVICING 
TO QUALIFIED SERVICE PERSONNEL .
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before installing and operating the projector, read this 
manual thoroughly.
The projector provides many convenient features and 
functions. Operating the projector properly enables 
you to manage those features and maintains it in good 
condition for many years to come.
Improper operation may result in not only shortening the 
product life, but also malfunctions, fire hazard, or other 
accidents.
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections 
and try the solutions in the “Troubleshooting” section 
in the back of this manual. If the problem still persists, 
contact the dealer where you purchased the projector or 
the service center.
FOR EU USERSThe symbol mark and recycling systems described below ap-ply to EU countries and do not apply to countries in other ar-eas of the world.
Your  product  is  designed  and  manufactured  with  high  qual-ity  materials  and  components  which  can  be  recycled  and/or reused.The  symbol  mark  means  that  electrical  and  electronic  equip-ment,  batteries  and  accumulators,  at  their  end-of-life,  should be disposed of separately from your household waste.
Note: If a chemical symbol is printed beneath the symbol mark, this chemical  symbol  means  that  the  battery  or  accumulator  con-tains  a  heavy  metal  at  a  certain  concentration.  This  will  be indicated as follows: Hg: mercury, Cd: cadmium, Pb: leadIn the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators.Please, dispose of them correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environment we live in! 
READ AND KEEP THIS OWNER’S MANUAL FOR 
LATER USE .
CAUTION
Not for use in a computer room as defined in the 
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
SIDE and TOPREAR
0.7’(20cm)
1.5’(50cm) 3’(1m) 3’(1m)
20cm
50cm 1m 1m 
						

							5
All the safety and operating instructions should be read before 
the product is operated.
Read all of the instructions given here and retain them for 
later use. Unplug this projector from AC power supply before 
cleaning. Do not use liquid or aerosol cleaners. Use a damp 
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For added protection to the projector during a lightning storm, 
or when it is left unattended and unused for long periods of 
time, unplug it from the wall outlet. This will prevent damage 
due to lightning and power line surges.
Do not expose this unit to rain or use near water... for 
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the 
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or 
table. The projector may fall, causing serious injury to a child 
or adult, and serious damage to the projector. Use only with 
a cart or stand recommended by the manufacturer, or sold 
with the projector. Wall or shelf mounting should follow the 
manufacturer's instructions, and should use a mounting kit 
approved by the manufacturers.
An appliance and cart combination 
should be moved with care. Quick stops, 
excessive force, and uneven surfaces 
may cause the appliance and cart 
combination to overturn.
Slots and openings in the back and side of the cabinet are 
provided for ventilation, to ensure reliable operation of the 
equipment and to protect it from overheating.
The openings should never be covered with cloth or other 
materials, and the bottom opening should not be blocked 
by placing the projector on a bed, sofa, rug, or other similar 
surface. This projector should never be placed near or over a 
radiator or heat register.
This projector should not be placed in a built-in installation 
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through 
cabinet slots as they may touch dangerous voltage points 
or short out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of air-
conditioning equipment.
This projector should be operated only from the type of power 
source indicated on the marking label. If you are not sure of 
the type of power supplied, consult your authorized dealer or 
local power company.
Do not overload wall outlets and extension cords as this can 
result in fire or electric shock. Do not allow anything to rest on 
the power cord. Do not locate this projector where the cord 
may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening 
or removing covers may expose you to dangerous voltage 
or other hazards. Refer all servicing to qualified service 
personnel.
Unplug this projector from wall outlet and refer servicing to 
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following 
the operating instructions. Adjust only those controls that 
are covered by the operating instructions as improper 
adjustment of other controls may result in damage and will 
often require extensive work by a qualified technician to 
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been 
damaged.
f.  When the projector exhibits a distinct change in 
performance-this indicates a need for service.
When replacement parts are required, be sure the service 
technician has used replacement parts specified by the 
manufacturer that have the same characteristics as the 
original part. Unauthorized substitutions may result in fire, 
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, 
ask the service technician to perform routine safety checks to 
determine that the projector is in safe operating condition.
Safety Instructions
NOTE FOR CUSTOMERS IN THE US
 LAMP(S)  INSIDE THIS  PRODUCT  CONTAIN 
MERCURY  AND  MUST  BE  RECYCLED  OR  DISPOSED 
OF  ACCORDING  TO LOCAL, STATE OR FEDERAL  
LAWS. 
						

							6
Openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect it 
from overheating, these openings must not be blocked or 
covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When using or 
installing the projector, the following precautions should be 
taken. 
–  Do not put any flammable object or spray can near the 
projector, hot air is exhausted from the air vents.
–   Keep the exhaust vent at least 3’ (1 m) away from any 
objects.
–  Do not touch peripheral parts of the exhaust vent, 
especially screws and metallic parts. These areas will 
become hot while the projector is being used.
–   Do not put anything on the cabinet. Objects put on the 
cabinet will not only get damaged but also may cause 
fire hazard by heat.
Cooling fans are provided to cool down the projector. 
The fans’ running speed is changed according to the 
temperature inside the projector.
The projector uses a lamp which generates significant 
heat. The cooling fans and air vents are provided to 
dissipate the heat by drawing air into the housing and the 
filter is located in the intake vents to prevent dust from 
getting inside of the projector.
In order to care for the projector appropriately, regular 
cleaning is required. Remove any dirt or dust that has 
accumulated on the projector.
If the projector reaches a time set in the timer setting, a 
Filter replacement icon (Fig. 1) appears on the screen and 
WARNING FILTER indicator on the top panel lights up (see 
below), indicating that the filter replacement is necessary.
If the projector detects that the filter is clogged and 
no scroll is left in the filter cartridge, a Filter cartridge 
replacement icon (Fig. 2) appears on the screen and 
WARNING FILTER indicator on the top panel lights up (see 
below). Stop using the projector immediately and replace 
the filter cartridge.
Blocking the air vents and leaving the projector uncleaned 
for a long time may not only damage the projector and may 
require costly repairs but may also cause accidents or fire.
For maintenance of the filter, refer to “Filter counter” on 
page 65 and “Maintenance and Care” on pages 66-68.
Damages to the projector caused by using an 
uncleaned filter or improper maintenance will void the 
warranty on the projector  .
IMPORTANT!
Filter Maintenance!!
Top Panel
WARNING FILTERindicator
Fig . 1   Filter replacement icon
Fig . 2    Filter cartridge 
replacement icon
Safety Instructions
Air Circulation
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air flow 
						

							7
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in severe accident 
or fire hazard.
This projector can project the picture in upward, downward, or inclined \
position in perpendicular direction to the horizontal 
plane. When installing the projector in downwardly inclined position, in\
stall the projector bottom side up.
Avoid positioning the projector as described below when installing.
Positioning Precautions
Do not tilt the projector more than 10 
degrees from side to side. 
Do not put the projector on either side 
to project an image. 
 10°10°
10°10°
In upward projection, do not tilt 
the projector over 10 degrees 
right and left.
In downward projection, do not 
tilt the projector over 10 degrees 
right and left.
For ceiling mounting, you need the ceiling mount kit designed for this p\
rojector. When not mounted properly, 
the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector 
does not cover any damage caused by use of any non-recommended ceiling m\
ount kit or installation of the 
ceiling mount kit in an improper location.
CAUTION ON CEILING MOUNTING
Safety Instructions
Note:	 To	inverse	or	reverse	the	image,	set	the	ceiling	function	to	On.	(pp.	44,	50)
Installing the Projector in Proper Directions
Cautious use of equipment with laser technology
Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the functionality 
of the projector, and will void any applicable warranties. 
						

							8
Safety InstructionsCompliance
Moving the Projector
Cautions in Handling the Projector
Use the handle grip when moving the projector.
Retract the adjustable feet to prevent damage to the lens and 
cabinet when carrying.
When this projector is not in use for an extended period, put it into 
a suitable case to protect the projector. 
 CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR
– Do not drop or bump the projector, otherwise damages or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other transport service\
 in an unsuitable transport case. This 
may cause damage to the projector. For information about transporting the projector by courier or any oth\
er 
transport service, consult your dealer.
– Do not put the projector in a case before it is cooled enough.
Do not hold the lens or the lens compartment tube when 
lifting or moving the projector. Doing so may cause damage 
to the lens and the projector. 
Care must be taken when handling the projector; do not 
drop, bump, subject it to strong forces, or put other things on 
the cabinet.
Do not hold the lens and the peripheral part.
CAUTION
Projection lens is a motorized lens. Please note the 
followings when using the projector.
●  Do not touch the lens while it is moving as this 
could cause injury to the fingers.
● Never allow children to touch the lens.
                                       Notes on protector
Remove the protector on the lens before use, and keep it for later 
use. For transportation, press and hold the LENS button on the 
side control or LENS SHIFT button on the remote control for more 
than 5 seconds to return the lens to the central position, and then 
attach the protector to protect the lens. 
(For LC-WXL200A)
Protector 
						

							9
AC Power Cord for the United Kingdom:
 This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on  the  pin  face  of 
the  plug.  Should  the  fuse  need  to  be  replaced,  an  ASTA  approved  BS  1362  fuse  must  be  used  of  the  same  rating, 
marked thus A S A. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover 
is  required,  ensure  it  is  of  the  same  colour  as  that  visible  on  the  pin  face  of  the  plug  (i.e.  red  or  orange).  Fuse  covers 
are available from the Parts Department indicated in your User Instructi\
ons.
 If the plug supplied is not suitable for your socket outlet, it should b\
e cut off and destroyed.
 The end of the flexible cord should be suitably prepared and the correct\
 plug fitted.  
 WARNING:  A  PLUG  WITH  BARED  FLEXIBLE  CORD  IS  HAZARDOUS  IF  ENGAGED  IN  A  LIVE  SOCKET 
OUTLET  .
 The Wires in this mains lead are coloured in accordance with the followi\
ng code:
   Green-and-yellow ·············Earth
   Blue ·················\
·············Neutral
   Brown ·················\
···········Live
 As  the  colours  of  the  wires  in  the  mains  lead  of  this  apparatus  may  not  correspond  with  the  coloured  markings 
identifying the terminals in your plug proceed as follows:
 The  wire  which  is  coloured  green-and-yellow  must  be  connected  to  the  terminal  in  the  plug  which  is  marked  by 
the letter E or by the safety earth symbol  or coloured green or green-and-yellow.
 The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured 
black.
 The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured 
red.
 WARNING: THIS APPARATUS MUST BE EARTHED .
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC Power Cord for the United States and Canada:
 AC  Power  Cord  used  in  the  United  States  and  Canada  is  listed  by  the  Underwriters 
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
 AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that 
the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be 
unable to insert the plug into the outlet, contact your electrician.GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASIL y ACCESSIBLE .
AC Power Cord Requirement
Compliance
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a\
 Class A digital device, pursuant to Part 
15 of FCC Rules. These limits are designed to provide reasonable protection against harmf\
ul interference when 
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the i\
nstruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a r\
esidential area is likely to cause harmful 
interference in which case the user will be required to correct the inte\
rference at his own expense. 
Do not make any changes or modifications to the equipment unless otherwi\
se specified in the instructions. If such 
changes or modifications should be made, you could be required to stop o\
peration of the equipment.
Canadian Radio Interference Regulations
This Class A digital apparatus meets all requirements of the Canadian ICES-003.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interfe\
rence in which
case the user may be required to take adequate measures. 
						

							10
Part Names and Functions
 CAUTION
Hot air is exhausted from the exhaust vent. Do 
not put heat-sensitive objects near this side.
① Lens Release Button
② Indicators
③ Lamp Cover 
④ Speaker 
⑤ Lens Cap (for LC-WXL200A) 
⑥ Projection Lens (for LC-WXL200A)
⑦ Lens Mount Cover
    (for LC-WXL200AL)
⑧ Infrared Remote Receiver (Front & Top) 
⑨ Side Controls
⑩ Exhaust Vent
Bottom
Back
⑮
⑭
⑩⑫⑬⑪
⑰
⑯
⑪ Infrared Remote Receiver (Back)
⑫ Terminals and Connectors
⑬ Filter Cover & Air Intake Vent
⑭ Power Cord Connector
⑮ Rear Cover (Optional Parts Attachment)
⑯ Hand Grip
⑰ Security Chain Hook
Note:
This	is	not	a	handle	for	carrying	the	projector.
Do	not	carry	the	projector	with	this	hook.
⑱ Adjustable Feet
③
④
Front
②①
⑥⑤⑦⑧⑨⑩
⑰
⑱⑱
 CAUTION
Do not cover the light beam in front of the
lens. High temperature from light beam may
damage the lens.