Eiki Projector Lc Wip3000 User Manual

39
Network Control Software Application
Before Using Network Control Software1. If the system is Windows 2000, XP or Vista, the PC should be started by the Administrator.
2.  Before starting the Network Control software, please check the following.
    (2-1) The computer must have Network Control software installed.
    (2-2)  The projector should be powered on and the LAN wire is well connected to projector.
    (2-3) The LAN module ON/OFF item in SECURITY menu of OSD should be setting ON.
    (2-4)...

40
Network Control Software Application-Browser Control
There are two ways to connect to the network control: Browser Control and Software control.
Browser Control
Auto IP address setting (DHCP setting is "ON"): 
(1) Enable DHCP from the projector on-screen-display menu, under "SECURITY  LAN SETTING".
»Å¼³
Please wait for the PC server to release IP address to the projector.
(3)           Enter "Given IP address (For example http://192.168.1.176/)" into the address bar of the...

41
Network Control Software Application-Browser Control
Item Setting description:
ITEM SETTING DESCRIPTION
Status Show current projector status and network configuration settings.
Control Select projector’s detailed setting from this page.
Network Set up network configuration and password from this page.
Alert Show and setup Alert configurations.
Schedule Show and set up Schedule, including Weekly Schedule and Specific Day.
If the Administrative & User password is enabled, select your User Name and enter...

42
Network Control Software Application-Browser Control
Status :Show current projector status and network configuration settings.
ITEM SETTING DESCRIPTION
IP Address Show current IP address.
System Status Show if projector is Power On or Inactive *.
Projector Name Show projector name.
Group Name Show group name.
Lamp Hours Show lamp used hours on current projector.
Filter Hours Show filter used hours on current projector.
Input Source Show current input source.
Date(y/m/d) Show date set on current...

43
Network Control Software Application-Browser Control
Control:Select projector’s detailed setting from this page. 
ITEM SETTING DESCRIPTION
Basic
Projector Name Show projector name on the current projector.
System Status  how if projector is Power On or Inactive .
Power Switch Power On or Power Off the projector via network.
Input Source Select input source.
Date Setting Update date setting on the projector. Click "Submit" button to update the settings.
Time Setting Update time setting on the...

44
Network Control Software Application-Browser Control
Network :Set up network configuration and password from this page.
ITEM SETTING DESCRIPTION
Network
DHCP Assign an IP address to the projector from the DHCP server automatically.
IP Address Set up IP Address when DHCP is disabled.
Subnet Mask Set up Subnet Mask when DHCP is disabled.
Gateway Set up Gateway when DHCP is disabled.
DNS Server Set up DNS Server address when DHCP is disabled.
Group Name Create projector group. (Max length: 14 characters)...

45
Network Control Software Application-Browser Control
Alert:Show and setup Alert configurations.
When problem occurs to the projector, it will automatically send e-mail to remind user.
How to opearte:
1. Enter Email Setting columns.
2. Enter SMTP Setting columns.
3. Select Alert Condition. Multiple choices are fine.
4. Press Submit to confirm.
5.  After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to 
see if the attendees can receive the e-mail.  If the...

46
Network Control Software Application-Browser Control
Schedule :Show and set up Schedule, including Weekly Schedule and Specific Day.
Weekly Schedule
To power on and power off projector based on Weekly Schedule.
How to set up:
1. Choose week days.
2. Set up power-on or power-off time.
    ( Please be sure that the interval between power-on and off setting is more than 5 minutes.)
3. Enter Input Source and select input source.
4. After completing setting, press ADD to confirm.
5. To cancel items, select...

47
Network Control Software Application-Software Control
Software Control
Activate Network Control Software
 Execute the Network Control Software.
 
  Monitor window below appears.
 

48
Network Control Software Application-Software Control
Projector Auto  Search.
   Click the  (Projector search), then the Search Window below appears.
   Click  (search again), then the target projectors will be listed as follows. NOTE
If the security warning window appears, please select "Unblock" to allow the 
Network Control software to work.


NOTE
If there is no projector found on the display window, the following maybe the causes:
1.  There is no DHCP server available on the LAN. The...