Eiki Projector Lc Wip3000 User Manual

							39
Network Control Software Application
Before Using Network Control Software1. If the system is Windows 2000, XP or Vista, the PC should be started by the Administrator.
2.  Before starting the Network Control software, please check the following.
    (2-1) The computer must have Network Control software installed.
    (2-2)  The projector should be powered on and the LAN wire is well connected to projector.
    (2-3) The LAN module ON/OFF item in SECURITY menu of OSD should be setting ON.
    (2-4)  Make sure the computer and projector can connect to network. Network Control software 
needs to arrange in TCP/IP network communication and the network cable.
  
   NOTE: 
         IE8 browser & 1024x768 viewing resolution is recommended. 
						

							40
Network Control Software Application-Browser Control
There are two ways to connect to the network control: Browser Control and Software control.
Browser Control
Auto IP address setting (DHCP setting is "ON"): 
(1) Enable DHCP from the projector on-screen-display menu, under "SECURITY  LAN SETTING".
»Å¼³
Please wait for the PC server to release IP address to the projector.
(3)           Enter "Given IP address (For example http://192.168.1.176/)" into the address bar of the web 
      browser and press “Enter” key or click “Go” button. 
						

							41
Network Control Software Application-Browser Control
Item Setting description:
ITEM SETTING DESCRIPTION
Status Show current projector status and network configuration settings.
Control Select projector’s detailed setting from this page.
Network Set up network configuration and password from this page.
Alert Show and setup Alert configurations.
Schedule Show and set up Schedule, including Weekly Schedule and Specific Day.
If the Administrative & User password is enabled, select your User Name and enter password to login.
 
  ADMINISTRATOR MODE
       adminstrator name: admin
       default password: 0000
  USER MODE
      user name: user
      default password: 1234 
						

							42
Network Control Software Application-Browser Control
Status :Show current projector status and network configuration settings.
ITEM SETTING DESCRIPTION
IP Address Show current IP address.
System Status Show if projector is Power On or Inactive *.
Projector Name Show projector name.
Group Name Show group name.
Lamp Hours Show lamp used hours on current projector.
Filter Hours Show filter used hours on current projector.
Input Source Show current input source.
Date(y/m/d) Show date set on current projector.
Time Show time set on current projector.
MAC Address Show current MAC Address.
*    When system status shows "Inactive", it could either mean the projector is "Stand By Mode". 
						

							43
Network Control Software Application-Browser Control
Control:Select projector’s detailed setting from this page. 
ITEM SETTING DESCRIPTION
Basic
Projector Name Show projector name on the current projector.
System Status  how if projector is Power On or Inactive .
Power Switch Power On or Power Off the projector via network.
Input Source Select input source.
Date Setting Update date setting on the projector. Click "Submit" button to update the settings.
Time Setting Update time setting on the projector. Click "Submit" button to update the settings.
Picture
Brightness Adjust the image brightness level.
Contrast Adjust the image contrast level.
Sharpness Adjust the image sharpness.
Color Adjust the strength of whole color.
This function can only be used under Video signal, S-Video signal, or component 
video signal input.
Tint Adjust the image tint.
This function can be used under Video signal, S-Video signal, or component video 
signal.
Display Mode Adjust Natural/Cinema/Daylight/Green Board/White Board/Black/User Mode.
Audio
Volume Adjust the volume.
Mute Mute the volume OFF / ON.
Setting
V Keystone  Manually correct vertical keystone distortion in image.
Auto Sync Set all of the above setting automatically. (This function can only be used under PC 
mode)
Auto Search Search signal source manually or automatically.
Advanced
Freeze Freeze the current image on the screen.
Resize  4:3,16:9, 1:1, 16:10
Reset Reset all menu function to their factory default values.
Presentation
Projection Select Front/Ceiling/Rear/Celing and Rear
Lamp Mode Switch lamp mode between normal or ECO mode. 
						

							44
Network Control Software Application-Browser Control
Network :Set up network configuration and password from this page.
ITEM SETTING DESCRIPTION
Network
DHCP Assign an IP address to the projector from the DHCP server automatically.
IP Address Set up IP Address when DHCP is disabled.
Subnet Mask Set up Subnet Mask when DHCP is disabled.
Gateway Set up Gateway when DHCP is disabled.
DNS Server Set up DNS Server address when DHCP is disabled.
Group Name Create projector group. (Max length: 14 characters)
Projector Name Create projector naming of the current projector. (Max length: 14 characters)
Password:ADMIN
Administrator Turn ON/OFF administrative password function.Administrator mode can 
control the conditions on web.
New Password Enter administrative password.(Max length: 15 characters)
Confirm Password Re-enter administrative password.
Password:USER
User Turn ON/OFF user password function. User mode only can read the 
conditions on web.
New Password Enter user password.(Max length: 15 characters)
Confirm Password Re-enter user password. 
						

							45
Network Control Software Application-Browser Control
Alert:Show and setup Alert configurations.
When problem occurs to the projector, it will automatically send e-mail to remind user.
How to opearte:
1. Enter Email Setting columns.
2. Enter SMTP Setting columns.
3. Select Alert Condition. Multiple choices are fine.
4. Press Submit to confirm.
5.  After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to 
see if the attendees can receive the e-mail.  If the attendees cannot receive the e-mail, please check if 
the setting is correct or not.  If you have questions with the Alert Setting, please contact your network 
service provider.
ITEM SETTING DESCRIPTION
Email Setting
To Set up the mail alert attendee. (Max length: 40 characters)
Cc Set up the backup mail alert attendee. (Max length: 40 characters)
Subject Set up the subject of the alert e-mail. (Max length: 40 characters)
From Set up the sender e-mail address. (Max length: 40 characters)
SMTP Setting
Server To enter the SMTP server (Mail server) name of the company or IP 
address.(Max length: 40 characters)
User Name Enter the sender’s e-mail address. (Max length: 40 characters)
For example: [email protected]
Password Enter password of the sender’s e-mail account. (Max length: 15 characters)
Alert Condition
Fan Lock The cooling fan is not operating.
Over Temperature The projector internal is over heated.
Lamp fail The lamp does not light up.
Lamp Time Alert  Lamp has reached its life time. Suggest changing the lamp.
Lamp Cover Opened Lamp Cover does not close well.
Filter Time Alert Filter has reached its life time. Suggest cleaning the filter. 
						

							46
Network Control Software Application-Browser Control
Schedule :Show and set up Schedule, including Weekly Schedule and Specific Day.
Weekly Schedule
To power on and power off projector based on Weekly Schedule.
How to set up:
1. Choose week days.
2. Set up power-on or power-off time.
    ( Please be sure that the interval between power-on and off setting is more than 5 minutes.)
3. Enter Input Source and select input source.
4. After completing setting, press ADD to confirm.
5. To cancel items, select the item and press "Cancel" button.
Specific Day
Based on Specific Day to set up power-on and power-off time.
How to set up:
1. Choose power-on days and time.
2. Choose power-off days and time.
    ( Please be sure the setting period between power-on time and off time is greater than 5 minutes.)
3. Enter Input Source and select input source.
4. After completing setting, press ADD to confirm.
5. To cancel items, select the item and press "Cancel" button. 
						

							47
Network Control Software Application-Software Control
Software Control
Activate Network Control Software
 Execute the Network Control Software.
 
  Monitor window below appears.
 
						

							48
Network Control Software Application-Software Control
Projector Auto  Search.
   Click the  (Projector search), then the Search Window below appears.
   Click  (search again), then the target projectors will be listed as follows. NOTE
If the security warning window appears, please select "Unblock" to allow the 
Network Control software to work.


NOTE
If there is no projector found on the display window, the following maybe the causes:
1.  There is no DHCP server available on the LAN. The LAN module is shipping 
with DHCP-configured client enabled in default.
2.  If there is no DHCP server available on the LAN. The LAN module default IP 
address should be 169.254.1.1. Please modify the PC/Laptop IP address setting to 
make the PC/Laptop IP address located on the same segment as 169.254.xxx.xxx 
and try again .