Eiki Projector Lc Wip3000 User Manual
Have a look at the manual Eiki Projector Lc Wip3000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
19 Remote Control Remote Control Batteries Installation 1. Remove the battery cover. 2. Load the batteries. Make sure the poles are correctly oriented. 3. Close the battery cover. Caution ►Avoid excessive heat and humidity. ►Do not drop the remote control. ► If the remote control will not be used for an extended period, remove the batteries. ► Do not expose the remote control to water or moisture. This could result in malfunction. ► Replace the battery when remote control operation becomes sluggish or unresponsive. ► Do not place the remote control close to the exhaust ventilation opening of the projector, because the exhaust air is hot. ► Do not use batteries of different types at the same time. ► Do not mix a new battery with used one. Make sure the plus and negative terminals are correctly aligned when loading batteries. ► Dispose of batteries in accordance with environmental laws of your area. ► Do not disassemble the remote control. If the remote control needs service, please contact your dealer. ► The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Remote Control (Optional) 20 Remote Control POWER Power on / operation mode, Standby mode, Cool down mode. INPUT Select input source : MENU Display or hide the On-Screen Display main menu page. Press or to select On-Screen Display menu item. Press or to select and adjust the function of On-Screen Display menu item or value. LASER Aim the remote control at the screen, press and hold button to activate the laser pointer. MUTE Mute audio. AUTO Refresh the current image. BLANK Hide the current image, become black color on the screen. Press / / / button to move arrow direction of window. MOUSE-L / MOUSE-R The function is like mouse of desktop/ notebook. Remote control’s mouse functions will only work if the USB cable is connected (see page 17 for instructions) RGB 1 RGB 2 Video S-VideoHDMI Y,Pb,Pr
21 Menu Operation How To Operate On-Screen Display 1. Press "Menu" button. Following menu will appear. 2. Press up / down / left / right button on touch keypad or remote control to select item or adjust value. Up / Down / Right / Left button Menu button 007
MENU (PC Mode) 22 MENU (PC Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjust the image brightness level. CONTRAST 000/100 Adjust the image contrast level. SHARPNESS 000/015 Adjust the image sharpness. DISPLAY MODENATURAL Natural color. CINEMA Enhance contrast ratio when displaying DVD contents. DAYLIGHT Suitable when ambient light is strong. GREEN BOARD WHITE BOARD BLACK BOARDAdjust the color settings to make the projected image on a (green, white, black) board more visible. USERUser Red 000/100 User Green 000/100 User Blue 000/100 007 *Only USER mode in Display mode USER RED/GREEN/BLUE can be adjusted. *The setting data in this Picture Menu is not shown correctly if no signal is fed and projected.
23 MENU (PC Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description VOLUME 00/40 Adjust the volume. MUTE OFF/ON Mute the volume OFF / ON.
24 MENU (PC Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description H POSITION 000/100Move the image position horizontally. This function can be used under computer signal input only. V POSITION 000/100Move the image position vertically. This function can be used under computer signal input only. PHASE 000/100 Adjust the image sharpness. FREQUENCY 000/200 Set the horizontal scanning frequency. AUTO KEYSTONEOFF/ON Correct keystone distortion in image automatically. KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually. AUTO SYNC EXECUTE Set all of the above setting automatically. AUTO SEARCH OFF/ON Search signal source manually or automatically. KEYPAD BEEPOFF/ONTurn the Beep of Keypad OFF / ON.. * H POSITION, V POSITION, PHASE, FREQUENCY and AUTO SYNC does not work for Digital RGB signal. * The setting data in this Setting Menu is not shown correctly if no signal is fed and projected.
MENU (Video Mode) 25 MENU (Video Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjust the image brightness level. CONTRAST 000/100 Adjust the image contrast level. SHARPNESS 000/015 Adjust the image sharpness. COLOR 000/100Adjust the strength of whole color. This function can be used under video signal, S-Video signal, or component video signal input only. TINT 000/100Adjust the image tint. This function can be used under video signal, S-Video signal, or component video signal. DISPLAY MODENATURAL Natural color. CINEMA Enhance contrast ratio when displaying DVD contents. DAYLIGHT Suitable when ambient light is strong. GREEN BOARD WHITE BOARD BLACK BOARDAdjust the color settings to make the projected image on a (green, white, black) board more visible. USERUser Red 000/100 User Green 000/100 User Blue 000/100 007 *Only USER mode in Display mode USER RED/GREEN/BLUE can be adjusted. *The setting data in this Picture Menu is not shown correctly if no signal is fed and projected.
26 MENU (Video Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description VOLUME 00/40 Adjust the volume. MUTE OFF/ON Mute the volume OFF / ON.
27 MENU (Video Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description AUTO KEYSTONE OFF/ON Automatically Correct keystone distortion in image. V KEYSTONE -70/+70 Correct vertical keystone distortion in image manually. AUTO SEARCH OFF/ON Search signal source manually or automatically. KEYPAD BEEPOFF/ON Turn the Beep of Keypad OFF / ON.
28 MENU Advanced Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description ZOOM / PAN EXECUTE Execute digital zoom and pan function. FREEZE OFF/ON Freeze the current image on the screen. BLANK OFF/ON Hide the image. Display on the screen turns into black. BLANK POWER OFF15/30/60 MinuteSet power off time after "Blank". RESET EXECUTE Reset all menu function to their factory default values. RESIZE 4:3, 16:9, 1:1 LANGUAGE ENGLISH wOÍEnglish Dutch Français Deutsch Italiano Español ไทย Polski ﻉﺭﺏﻱﺓ Svenska Português Русский УкраїнськаLþ_Í SELECT SOURCE EXECUTESelect the input source from: The search starts from the current port. When an input is found, the projector will stop searching and display the image. Note: RGB2 can be changed to monitor out or input by here. Default setting is Input. LOGO SETTING EXECUTECustomize the start-up logo. IMPORTANT: To implement Logo setting function, please enter PIN code first. Without inputting the PIN code, you cannot modify Logo setting function. Select the language of the menu and on screen display massage. RGB 1 RGB 2 Video S-VideoHDMI Y,Pb,Pr