Eiki Projector Lc Wip3000 User Manual

29
MENU
Advanced Menu
LOGO SETTING
This function allows you 
to customize the start-up 
logo. 
In order to access 
this page PIN code is 
required.
 
Item Selection Description
LOGO MODEDEFAULT
USER
OFFSelect Mode( ► cursor button)
The factory logo.
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTUREEXECUTE Start to capture the image.(PC mode only)
BACKGROUNDBLACK
BLUE
WHITESet background color.
LOGO SIZEORIGINAL
FULLDisplay the captured image in original...

30
MENU
NOTE  ►You can capture an image only in computer mode.
  ►The area that can be captured is 512 x 384 dots.
Advanced Menu
Logo Capture
How to use this function?
   Select Logo Capture item in the logo 
setting menu, then press ► button.
   Red frame will appear to select captures 
area.
   Use 4 direction buttons to adjust the 
position of the frame.
   Press "MENU" to start capturing and 
display a dialog.

Image

Logo Capture In Progress. 

31
MENU
Presentation Menu
Step:
1.    Use the ▲ /▼buttons 
to select an item.
2.    Use the ◄ / ► buttons 
to select an item or 
adjust the value.
Item Selection Description
AUTO CEILING OFF / ONAutomatically invert the image when the projector is turned 
upside down, i.e. when the projector is mounted on the 
ceiling.
FRONT EXECUTE Normal projection mode.
CEILING EXECUTEMirror the image vertically, only for the projector mounted 
upside down.
REAR EXECUTEMirror the image horizontally, only for...

32
MENU
NOTE
►  The replacement warning message is set to appear after about 2500 hours of lamp use in order 
to maintain the initial brightness. When replacement message appears, replace the lamp with a 
new one as soon as possible, even if the lamp is still workable.
Presentation Menu
Reset Lamp Timer
The lamp timer is the time counted after the last resetting. The usage time of the lamp is 
shown in the PRESENTATION Menu. Select the “RESET LAMP TIMER” if the lamp 
timer is required to reset. The...

33
MENU
Security Menu
Step:
1.   Use the ▲ /▼buttons to 
select an item.
2.   Use the ◄ / ► buttons to 
select an item or adjust the 
value.
Item Selection Description
PIN LOCK 
PROTECTIONOFF
ON 1
ON 2OFF:    Turn off PIN lock protection.
ON 1:  After plugging in AC power, you need to key in PIN 
code at the first time of use. If the AC power stays 
unplugged, you do not need to key in PIN code next 
time when you use the projector.
ON 2:  You need to key in PIN code every time when you 
turn on the...

34
MENU
Security Menu
Step:
1.   Use the ▲ /▼buttons to 
select an item.
2.   Use the ◄ / ► buttons to 
select an item or adjust the 
value.
Item Selection Description
FILTER TIMER Show the filter use time.
RESET FILTER
TIMEREXECUTE Reset the filter timer after cleaning / changing filter.
FILTER COUNTER500 hours
800 hours
1000 hoursSelect (500 / 800 / 1000 hours) depending on the 
environment.(default : 500 hours). Please see next page.
MAC ADDR.For LAN control module, "MAC ADDR." will be shown in...

35
MENU
Security Menu
Step:
1.   Use the ▲ /▼buttons to 
select an item.
2.   Use the ◄ / ► buttons to 
select an item or adjust the 
value.
Item Selection Description
PROJECTOR 
NAMEDefault is 
ProjectorProjector network setting display which shows bits that can 
be recognized by ASCII.
DHCP OFF / ONWhen setting ON, projector's IP address will be assigned by 
DHCP server automatically. When setting OFF, you can use 
remote control to do setting manually.
IPKey in IP address manually. Press...

36
MENU
NOTE
► Please reset the Filter time only when you replace the filter.
Auto Filter Alert
Auto Filter Alert in SECURITY category shows the air filter use time and alerts user to change 
filter. When the operating time reaches the set time, a warning message will appear on the screen to 
remind user of filter cleaning /replacing.
Filter Replace...
Filter has been used for more than 500 hours. 

37
MENU
PIN Key In Operation
When the projector is turned on and the 
PIN LOCK PROTECTION is set to [ON], 
the image will show as on the right side.
1.  Press the MENU button on the projector 
or remote control. Enter PIN code by 
keypad or remote control.
2.   How to enter a PIN code? 
You can use control panel or remote 
control.
(1) Press ◄ button: Select the [ 1 ]
(2) Press ▲ button: Select the [ 2 ]
(3) Press ► button: Select the [ 3 ]
(4) Press ▼ button: Select the [ Enter ] to move to next...

Network Control Software Application
38
Network Control Software Application
LAN
Procedure to utilize this function
Network Control is provided in visual interface, it can help user to monitor and manage the 
projector(s) status in the local area network.
1.  Register the projector(s) which needs to be controlled. 
" Auto search " can help you to seek the projector(s) source easily. 
After registering in the work group, you can start to control the projector.
2.  Group the projector(s) into...