Eiki Projector Lc Wb42n User Manual

71

Appendix
			 –	Check	PC	adjustment		or	Screen	and	adjust	them.																														
																																																																				 See	pages	34-35,	38-39	.									
	 		 –	PIN	code	lock	is	being	set.	Enter	a	PIN	code	("
1234"		or	numbers	
			 	 you	have	set).	See	pages	22,	59-60.	
	 								 –	Make	sure	your	computer	is	connected	to	the	projector	with	USB		
						 	cable.	See	page	17.	 	 	 	 	 	 	
	 	 –	Check	cable	connection	between	the	projector	and	your...

72

WARNING	:
High	voltages	are	used	to	operate	this	projector .	Do	not	attempt	to	open	the	cabinet .
If	problems	still	persist	after	following	all	operating	instructions,	contact	the	dealer	where	you	purchased	the	
projector	or	the	service	center.	Specify	the	model	number	and	explain	about	the	problem.	We	will	advise	you	
how	to	obtain	service.
This	symbol	on	the	nameplate	
means	the	product	is	Listed	
by	Underwriters	Laboratories	
Inc.	It	is	designed	and	
manufactured	to	meet	rigid	
U.L.	safety...

73

Appendix
Menu	Tree
SVGA 	1Mode	1Mode	2	-	-	-	-
Total	dotsHorizontalVertical
Display	area	HDisplay	area	VReset
Dynamic
RealBlackboard	(Green)
Image	1Image	2Image	3
Image	 AdjustContrastBrightnessColor	temp.
Red
Gamma
Store
Normal
True
Digital	zoom	
–
Full	
0–630–63
Computer	Input
PC	adjust
Mode	1Mode	2Mode	3Mode	4Mode	5
Image	Select
0–63
0–15
Image	1Image	2Image	3Image	4Screen
Yes/No
	*	Systems	displayed	in	the	System	Menu	vary	 depending	on	an	input	signal.
ResetYes/No
Sharpness0–15
Computer...

74

Appendix
AutoPALSECAMNTSCNTSC	4.43PAL-MPAL-N
HDMI	Input	/	Video	Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard	(Green)
Image	1Image	2Image	3
Normal
0–630–63
Off
Setting
Image	Select
System	(2)
System	(3)
Image	AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15	0–15
Image	1
Screen
Yes/No
Image	4
LanguageSetting17	languages	provided.
Blue/User/BlackOn/Countdown	off/Off	Logo	select
On/OffOn/Off
On/Off
Code	1–Code	8...

75

Check	the	indicators	for	projector	condition.																																			
•	•	•	green•	•	•	red•	•	•	off
•	•	•	blinks	green
When	the	projection	lamp	reaches	its	end	of	life,	the	LAMP	REPLACE	indicator	lights	yellow.	When	this	indicator	
lights	yellow,	replace	the	projection	lamp	with	a	new	one	promptly.
The	projector	is	off.	(The	 AC	power	cord	is	unplugged.)
The	projector	is	in	stand-by	mode.	Press	the	ON/STAND-BY 	button	
to	turn	on	the	projector.
Projector	Condition
POWERred/green...

76

AppendixCompatible	Computer	Specifications
Basically	this	projector	can	accept	the	signal	from	all	computers	with	the	V-,	H-Frequency	mentioned	below	
and	less	than	140	MHz	of	Dot	Clock	for	analog	signal	and	110	MHz	of	Dot	Clock	for	digital	signal. 		When	selecting	these	modes,	PC	adjustment	can	be	limited.
ON-SCREEN	
DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
VGA	1640	x	48031.4759.88
VGA	2720	x	40031.4770.09
VGA	3640	x	40031.4770.09
VGA	4640	x	48037.8674.38
VGA	5640	x	48037.8672.81
VGA	6640	x...

77

Appendix
Note:
	 •	When	the	input	signal	is	D-SXGA 	1,	D-SXGA	2	or	D-SXGA 	3,	images	may	not	be	displayed	properly	
depending	on	computers.
		•	 The	specifications	are	subject	to	change	without	notice.
When	the	input	signal	is	digital	from	HDMI	terminal,	refer	to	the	chart	below.
ON-SCREEN	
DISPLA yRESOLUTIONH-Freq .(KHz)V-Freq .(Hz)
D-VGA640	x	48031.4759.94
D-480p720	x	480----59.94
D-575p720	x	575----50.00
D-SVGA800	x	60037.87960.32
D-WXGA 	11366	x	76848.3660.00
ON-SCREEN	
DISPLA yRESOLUTIONH-Freq...

78

List	of	Picture	in	Picture
	o	:	Picture	in	Picture	combinations	are	enabled
	-	:	Picture	in	Picture	combinations	are	disabled
Note:	 •		When	the	input	signal(s)	is/are	incompatible,	X	mark	will	be	displayed	on	the	Main/Sub	picture.
	 •		 Depending	 on	the	 frequency	 or	signal	 type	of	PC/AV	 input,	the	display	 resolution	 may	be	lowered	 or
	images	 may	not	be	displayed 	on	
the	Main/Sub	picture.
　　 
	 	 •		Inputting	 PC	analog	signals:	Between	100-140	MHz
　　
	 	•		Inputting	 PC	analog	signals:...

79

Appendix
Technical	Specifications
Mechanical	Information		
	 Projector	 Type	 Multi-media	Projector	
	 Dimensions	(W	x	H	x	D)	 13.16"	x	3.09"	x	10.30	(334.2	x	78.4	x	261.5mm)	(Not	including	protrusions)
	
	 Net	Weight	 	8.2	lbs	(3.7	kg)
	
	 Feet	 Adjustment	 0˚	to	8.9˚	 	 	 	 	 	
	 		 	 	 	 	 	
Panel	Resolution		
	 LCD	Panel	System	0.74"	TFT	Active	Matrix	type,	3	panels		
	 Panel	Resolution	 1,280	x	800	dots
			Number	of	Pixels																																														3,072,000...

80

Appendix
	 			Model	No.
COMPONENT~VGA 	Cable																					:	AH-98771
SCART~VGA 	Cable																																:	
AH-98881
The	parts	listed	below	are	optionally	available.	When	ordering	those	parts,	specify	the	item	name	and	Model	No.	
to	the	sales	dealer.
Optional	Parts
Accessories
	 Owner’s	Manual	(CD-ROM)
			Quick	Reference	Guide	
			Safety	Manual
	
	 AC	Power	Cord
	
	 Remote	Control	and	Batteries	 	 	 	 	 	 	 	 	 	 	
	 VGA 	Cable
	 PIN	Code	Label
	
	 Network	 Application	(CD-ROM)...