Eiki Projector Lc Wb42n User Manual

21

The	preparation	display	will	disappear	
after	30	seconds.
(See	page	58	for	Lamp	control	status.)
Turning	On	the	Projector
Connect	the	projector’s	 AC	power	cord	into	an	AC	
outlet.	 The	POWER	indicator	lights	red.
 Open	the	slide	
shutter		(see	pages	9,	66).
Press	the	ON/SYAND-BY 	button	on	the	top	control	or	
on	the	remote	control.	 The	POWER	indicator	lights	
green	and	the	cooling	fans	start	to	operate.	 The	
preparation	display	appears	on	the	screen	and	the	
count	down	starts.	
2
3
1
4After	the...

22

What is PIN code?
PIN (Personal Identification Number) code is a security 
code that allows the person who knows it to operate the 
projector. Setting a PIN code prevents unauthorized use of 
the projector.
A PIN code consists of a four-digit number. Refer to the PIN 
code lock function in the Setting Menu on pages 59-60 for 
locking operation of the projector with your PIN code.
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the 
Point ► button to fix the number and move the red...

23

TO	MAINTAIN	THE	LIFE	OF	THE	LAMP,	ONCE	
YOU	 TURN	 THE	PROJECTOR	ON,	WAIT 	AT 	
LEAST 	FIVE	MINUTES	BEFORE	 TURNING	IT	
OFF.
Power	off?	disappears	after	4	seconds.
Turning	Off	the	Projector
Press	the	ON/STAND-BY 	button	on	the	top	control	or	
on	the	remote	control,	and	 Power	off?	appears	on	the	
screen.
Press	the	ON/STAND-BY 	button	again	to	turn	off	the	
projector.	 The	POWER	indicator	starts	to	blink	red,	and	
the	cooling	fans	keep	running	(You	can	select	the	level	
of	fans’ 	quietness	and	speed....

24

Basic	OperationHow	to	Operate	the	On-Screen	Menu
The	projector	can	be	adjusted	or	set	via	the	On-Screen	
Menu.	 The	menus	have	a	hierarchical	structure,	with	
a	main	menu	that	is	divided	into	submenus,	which	are	
further	divided	into	other	submenus.	For	each	adjustment	
and	setting	procedure,	refer	to	respective	sections	in	this	
manual.
Use	the	Point	
▲▼	buttons	to	highlight	or	select	a	main	
menu	item.	Press	the	Point	 ►or	the	SELECT	button	
to	access	the	submenu	items.	(The	selected	item	is...

25

Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 73-74.
Basic Operation








Main MenuSub-Menu


 Image select
 For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard 
and image 1 - 4 (p.36). 
      For HDMI or Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) , 
Colorboard and Image 1- 4 (p.43).
 Image adjust
 
For computer source, used to adjust computer image [...

26

Basic	Operation
Rotate	the	Zoom		Lever	to	zoom	in	and	out.		
Rotate	the	Focus	Ring	to	adjust	the	focus	of	the	image.		
Zoom	and	Focus	Adjustment
If	a	projected	picture	still	has	keystone	distortion	after	
pressing	the	AUTO	SETUP/CANCEL 	button	on	the	top	
control	or	the	 AUTO	SET/CANCEL 	button	on	the	remote	
control,	correct	the	image	manually	as	follows:
Press	the	KEYSTONE	button	on	the	remote	control.	 The	
Keystone	dialog	box	appears.	Use	the	Point	
▲▼	buttons	to	
correct	keystone	distortion....

27

Sound	Adjustment
1
2
Press	the	MENU	button	to	display	the	On-Screen	Menu.	
Use	the	Point	
▲▼	buttons	to	select	Sound .	Press	the	
Point	
► 	or	the	SELECT 	button	to	access	the	submenu	
items.	
Press	the	VOLUME+/–	buttons	on	the	top	control	or	on	the	
remote	control	to	adjust	the	volume.	 The	volume	dialog	box	
appears	on	the	screen	for	a	few	seconds.
Press	the	MUTE	button	on	the	remote	control	to	select	On	
to	temporarily	turn	off	the	sound.	 To	turn	the	sound	back	
on,	press	the	MUTE	button	again...

28

Basic	OperationRemote	Control	Operation
Using	the	remote	control	for	some	frequently	used	operations	is	advisable.	Just	pressing	one	of	the	buttons	
enables	you	to	make	the	desired	operation	quickly	without	calling	up	the	On-Screen	Menu.
Press	the	HDMI,	COMPUTER,	VIDEO	or	NETWORK	button	
on	the	remote	control	to	select	the	input	source.	See	pages	
30-31,	40-41	for	details.
Refer	to	the	owner’s	manual	of	“Network	Set-up	and	
Operation”	for	details	about	the	network	input.
HDMI/COMPUTER/VIDEO/NETWORK...

29

Basic	Operation
black	out	→	the	captured	image	→	normal	→	•	•	•	•	•
Press	the	NO	SHOW	button	on	the	remote	control	to	black	out	
the	image.	To	restore	to	normal,	press	the	NO	SHOW	button	
again	or	press	any	other	button.	When	a	projected	image	is	
captured	and	set	as	
User 	in	the	Logo	selection	(see	page	50),	
the	screen	changes	each	time	you	press	the	NO	SHOW	button	
as	follows.
NO	SHOW	button
Press	the	P-TIMER	button	on	the	remote	control.	 The	P-Timer	
display	
00:00 	appears	on	the	screen	and...

30

Choose	Computer	1	 by	pressing	the	INPUT 	button	on	the	top	control	or	press	the	COMPUTER	button	on	the	
remote	control.	
Before	using	these	buttons,	correct	input	source	should	be	selected	through	Menu	operation	as	described	
below.
1
Input	Menu
2
3
Input	Source	Selection	(Computer	1:	RGB	/	Component	/	RGB(Scart)	)
Computer	Input	
Note:
	 	 When	the	Input	Search	function	is	set	to 	On1	or	On2	in	
the	 Auto	setup	function,	the	input	signal	will	be	searched	
automatically	(p.48).
Computer	1
Top...