Eiki Projector Lc Wb42n User Manual

31

Computer	Input
Choose	Computer	 2	by	 pressing	 the	INPUT 	button	 on	the	 top	control	 or	press	 the	COMPUTER	 button	on	the	
remote	control.
Input	Source	Selection	(Computer	2:	RGB)
Direct	Operation
Menu	Operation
Note:
	 		When	the	Input	Search	function	is	set	to	On1 	or	On2,	
the	input	signal	will	be	searched	automatically	(p.48).
1
2
3
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	Input 	and	
then	press	the	Point	
►	or	the	SELECT 	button.	
Use	the...

32

Computer	Input
PC	System	MenuPC	System	Menu
Computer	System	Selection
This	projector	automatically	tunes	to	various	types	of	computers	based	on	VGA,	SVGA,	XGA,	SXGA,	WXGA,	
UXGA 	or	WUXGA 	with	its	Multi-scan	system	and	 Auto	PC	adjustment.	If	a	computer	is	selected	as	a	signal	
source,	this	projector	automatically	detects	the	signal	format	and	tunes	to	project	a	proper	image	without	any	
additional	settings.	(Signal	formats	provided	in	this	projector	are	shown	on	pages	76-77)
One	of	the	following...

33

Computer	Input
Auto	PC	adjustment	function	is	provided	to	automatically	adjust	Fine	sync,	Total	dots ,	Horizontal ,	Vertical,	
Clamp,	Display	area	H	 and	Display	area	V	 positions	to	conform	to	your	computer.
PC	adjust	Menu
Auto	PC	adjustment
To	store	adjustment	parameters
The	adjusted	parameters	from	the	 Auto	PC	adjustment	can	
be	stored	in	the	projector.	Once	the	parameters	are	stored,	
the	setting	can	be	done	just	by	selecting	a	 Mode	(1–5)	in	
the	PC	System	Menu	(see	page	32).	See	also	 Store...

34

Computer	Input
PC	adjust	Menu
Manual	PC	adjustment
Some	computers	employ	special	signal	formats	which	may	not	be	tuned	by	Multi-scan	system	of	this	projector.		
Manual	PC	adjustment	enables	you	to	precisely	adjust	several	parameters	to	match	those	signal	formats.	The	
projector	has	five	independent	memory	areas	to	store	those	parameters	manually	adjusted.	It	allows	you	to	recall	
the	setting	for	a	specific	computer.	
1
2
Use	the	Point	◄►	buttons	to	adjust	the	value,	eliminating	a	
flicker	from	the...

35

Store
To	store	the	adjusted	data,	select	Store	and	then	press	 the	
Point	
►	or	the	SELECT 	button.	Move	the	highlight	to	one	of	
the	Modes	1	to	5	in	which	you	want	to	store,	and	then	press	
the	SELECT 	button.
Mode	free
To	clear	the	stored	data,	select	 Mode	free	and	then	press	
the	Point	
►	or	the	SELECT 	button.	Move	the	highlight	to	the	
mode	that	you	want	to	clear	and	then	press	the	SELECT 	
button.
Note:
•	 Display	area	(H/V)	 cannot	be	selected	when 	480i,	575i,	
		480p,	575p,	720p,	1035i...

36

Computer	Input
Image	Select	Menu
IMAGE	button
Dynamic
Real
Image	1
Image	2
Image	3
Image	Mode	Selection	
Image	4
Blackboard(Green)
Standard
Remote	Control
IMAGE	button
Select	the	desired	image	mode	 among	Dynamic,	Standard ,	
Real,	Blackboard	(Green),	Colorboard,	Image	1 ,	Image	2 ,	
Image	3 	and	Image	4 	by	pressing	the	IMAGE	button	on	the	
remote	control.
Standard
Picture	mode	with	improved	halftone	for	graphics.
Real
Blackboard	(Green)
Image	1–4
Dynamic
Direct	Operation
For	viewing	pictures	in	a...

37

Computer	Input
Image	Adjust	Menu
Image	Adjustment
Reset
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
▲▼	buttons	to	select	 Image	
adjust	and	then	press	the	Point	►	or	the	SELECT 	
button.
1
2Use	the	Point	▲▼	buttons	select	the	desired	item	
and	then	press	the	SELECT 	button	to	display	the	
adjustment	dialog	box.	Use	the	Point	
◄►	buttons	to	
adjust	the	setting	value.
Note:
•	When	 White	balance	Red ,	
Green	or	Blue	is		
		adjusted,	 Color	temp . 	will	change	to	
User.
•	When...

38

Computer	Input
Store
This	projector	has	the	picture	screen	resize	function,	which	
enables	you	to	customize	the	image	size.
Screen	Menu
Screen	Size	Adjustment
Provide	the	image	to	fit	the	screen	size.
Normal
True
Provide	the	image	in	its	original	size.	When	the	original	
image	size	is	larger	than	the	screen	size	(1280	x	800),	the	
projector	enters	to	the	panning	mode	automatically.	Use	the	
Point	
▲▼◄►buttons	to	pan	the	image.	When	adjusted,	the	
arrows	will	turn	red.	When	reached	to	the	correction...

39

Computer	Input
Select	Digital	 zoom	+.	The	 On-Screen	 Menu	disappears	 and	
D .	 zoom	 +	appears.	 Press	the	SELECT 	button	 to	expand	 the	
image	 size.	Use	the	Point	
▲▼◄►	buttons	 to	pan	 the	image.	
The	Panning	function	can	work	only	when	the	image	is	larger	
than	the	screen	size.
A 	projected 	image 	can 	be 	also 	expanded 	by 	pressing 	the	
D.ZOOM	
+	button	on	the	remote	control.	
To	exit	the	Digital	zoom	+/–	mode,	press	any	button	except	
the	D.ZOOM	
+/-	buttons,	SELECT 	and	Point...

40

Choose	Video	or	S-video 	by	pressing	the	INPUT 	button	on	
the	top	control	or	the	VIDEO	button	on	the	remote	control.
1
2
Video
Input	Menu
Input	Source	Selection	(Video,	S-video)
Video	Input
Direct	Operation
Menu	Operation
When	video	input	signal	is	connected	to	the	
VIDEO	jack,	select	
Video.Video
When	video	input	signal	is	connected	to	the	S-
VIDEO	jack,	select	
S-video.S-video
Note:
	 •	Network 	is	 for	 the	 Network	 function.	 See	the	owner’s	
manual	of	“Network	Set-up	and	Operation”	.
	 •...