Eiki Projector Lc Wb42n User Manual

	 Network	Supported	
□		Wireless	LAN
	 	 	 	IEEE802.11b/g/n
□			 Wired	LAN
	 	 	 	100-Base-TX/10-Base-T
	 Memory	Viewer	
□		USB	Memory	Viewer	
	
*	Refer	to	the	owner’s	manuals	below	for	details	
about	network	and	memory	viewer	function.
			■			Network	Set-up	and	Operation
			■			Memory	viewer	function
Multimedia	Projector
Owner's	Manual
LC-WB42NMODEL 

2

Features	and	Design
This	Multimedia	Projector	is	designed	with	the	most	advanced	technology	for	portability,	durability,	and	ease	of	use.	
This	projector	utilizes	built-in	multimedia	features,	a	palette	of	16.77	million	colors,	and	matrix	liquid	crystal	display	
(LCD)	technology.
♦	Compact	Design
	 This	projector	is	designed	compact	in	size	and	weight.	It	is	easy	to	carry	and	installed	anywhere	you	wish	to	
use.
♦	Capable	of	360-degree	Projection
	 This	projector	is	capable	of	360-degree	projection....



Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its  respective 
corporation.
Features and Design   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Table of Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  ....

4

To	the	Owner
CAUTION:	 TO	REDUCE	THE	RISK	OF	ELECTRIC	SHOCK,	DO	NOT	REMOVE	COVER	(OR	
BACK) .	NO	USER-SERVICEABLE	PARTS	
INSIDE	EXCEPT	LAMP 	REPLACEMENT .	
REFER	SERVICING	TO	QUALIFIED	
SERVICE	PERSONNEL .
THIS	SYMBOL 	INDICATES	THAT	DANGEROUS	
VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	
SHOCK	IS	PRESENT 	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	 ARE	
IMPORTANT 	OPERATING	 AND	MAINTENANCE	
INSTRUCTIONS	IN	 THE	OWNER'S	MANUAL 	
WITH	 THIS	UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK
DO	NOT	OPEN...

5

Safety	Instructions
All	the	 safety	 and	operating	 instructions	 should	be	read	
before	the	product	is	operated.
Read	all	of	the	instructions	given	here	and	retain	them	
for	later	use.	Unplug	this	projector	from	 AC	power	supply	
before	cleaning.	Do	not	use	liquid	or	aerosol	cleaners.	
Use	a	damp	cloth	for	cleaning.
Follow	all	warnings	and	instructions	marked	on	the	
projector.
For	added	protection	to	the	projector	during	a	lightning	
storm,	or	when	it	is	left	unattended	and	unused	for	long	
periods...

6

Safety	Instructions
Openings	in	the	 cabinet	 are	provided	 for	ventilation.	 To	
ensure	 reliable	 operation	 of	the	 product	 and	to	protect	 it	
from	 overheating,	 these	openings	 must	not	be	blocked	
or	covered.	
	CAUTION
Hot	 air	is	exhausted	 from	the	exhaust	 vent.	When	 using	
or 	installing 	the 	projector, 	the 	following 	precautions	
should	be	taken.	
–	Do	 not	put	any	 flammable	 object	or	spray	 can	near	 the	
projector,	hot	air	is	exhausted	from	the	air	vents.
–	Keep	the	exhaust	vent...

7

Safety	Instructions
Use	the	projector	properly	in	specified	positions.	Improper	positioning	may	reduce	the	lamp	life	and	result	in	severe	
accident	or	fire	hazard.
This	projector	can	project	the	picture	upward,	downward	or	backward,	perpendicular	to	the	plane	of	the	screen	as	
shown	in	the	figure	below.
Bottom	
Downward
(Usual)
Front	
Downward
Bottom	
Upward
Front	
Upward
Installing	the	Projector	in	Proper	Directions
Avoid	positioning	the	projector	as	described	below	when	installing.
Positioning...

8

Compliance
Federal	Communications	Commission	Notice
Note:	This	equipment	 has	been	 tested	 and	found	 to	comply	 with	the	limits	 for	a	Class	 B	digital	 device,	 pursuant	
to	 Part	 15	of	the	 FCC	 Rules.	 These	limits	are	designed	 to	provide	 reasonable	 protection	against	harmful	
interference	 in	a	residential	 installation.	 This	equipment	 generates,	 uses,	and	can	radiate	 radio	frequency	
energy,	 and	if	not	 installed	 and	used	 in	accordance	 with	the	instructions,	 may	cause	 harmful...

9

Part	Names	and	Functions
Bottom
Back
⑯
⑮⑭⑬⑪⑫
⑰
⑨
⑩
⑪
⑱
 Kensington	Security	Slot
	This	slot	is	for	a	Kensington	lock	used	to	deter	theft	
of	the	projector.
	 *	 Kensington	is	a	registered	trademark	of	 ACCO	Brands	Corporation.
①	Infrared	Remote	Receiver
②	 WIRELESS	Indicator
③  Focus	Ring	
④  Projection	Lens	　
⑤	Zoom	Lever
⑥  Slide	Shutter
⑦	 Top	Controls	and	Indicators
⑧	Air	Intake	Vent
⑨	 Exhaust	vent	
⑩	Speaker
⑪		 Air	Intake	Vent	(back	and	bottom)
⑫		 Terminals	and	Connectors
⑬		Power	Cord...

10

Part	Names	and	Functions
Rear	Terminal	
⑨	S-VIDEO	IN
	 Connect	the	S-VIDEO	output	signal	from	video	 equipment	to	this	jack	(p.18).
⑫	AUDIO	IN
	 Connect	the	audio	output	signal	from	video	 equipment	connected	to	
⑨	or	⑬	to	this	jack.	
For	a	mono	audio	signal	(a	single	audio	jack),	
connect	it	to	the	L 	(MONO)	jack	(p.18).
⑪ COMPUTER	 1	COMPONENT	 /	COMPUTER	 2	
AUDIO	IN
	 Connect	the	audio	output	(stereo)	from	a	 computer	or	video	equipment	connected	to	
④,	
⑤	or	⑥  to	this	jack.	(pp17,	19)
⑬	VIDEO...