Eiki Projector Lc Wb200 User Manual

Setting
51
Setting
Time left before Lamp is off.
Power managementFor reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.
Select one of the following options:Ready ...........  When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the...

52
Setting
Standby	mode
This function is available when operating the projector via network. Network ..  Supply the power to the network function even after turning off the projector by pressing the ON/STAND-BY button on the remote control. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off. Eco .........  Select Eco when you do not use the projector via network. The projector’s network function will...

Setting
53
Setting
Closed captionClosed caption
Closed Caption is a function that displays the audio portion of a TV program as text on the screen. You can turn on the feature and switch the channels. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4.  If the Closed caption is not clear, you can change the text from Color to White.
Press the Point ▲▼ buttons toselect Off, CC1, CC2, CC3 or...

54
Setting
Remote	control	This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time.When  operating  the  projector  in Code  2,  both  the projector and the remote control must be switched to Code 2.
To	change	the	code	for	the	projector:Select either Code 1 or Code 2 in this Setting Menu.
To	change	the...

Setting
55
Setting
Key	lockKey	lock
Security	(Key	lock	and	PIN	code	lock)
PIN	code	lock
This function locks the top control and remote control buttons to prevent operation by unauthorized persons.Select Key	lock and then press the SELECT button and select the desired item by pressing the Point ▲▼ buttons.
  ........... Unlocked.
 ............  Lock the operation of the top control. To unlock, use the remote control. ............  Lock the operation of the remote control. To unlock, use the top control....

56
Setting
Use the Point ▲▼ buttons to select Off, On 1 or On 2, and then press the SELECT button to make a choice.
Change	the	PIN	code	lock	setting
Enter	a	PIN	codeUse  the  Point ▲▼  buttons  to  enter  a  number. Press  the  Point ◄ ►  buttons  to  fix  the  number and  move  the  red  frame  pointer  to  the  next  box. The number changes to . If you fixed an incorrect number,  use  the  Point ◄ ►	buttons  to  move  the pointer to the number you want to correct, and then enter the correct number....

Setting
57
Setting
Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector. Off................ Normal speed. Set this function to                        Off when using the projector in                       non- high altitude environment. On 1............. Faster than Off mode. Select this                       mode when using the projector in                       high altitudes (about 1,200 meters                       or...

58
Setting
Factory	default
This function returns all setting values except for the User	logo, PIN	code	lock, Logo	PIN	code lock, Lamp counter and Filter counter and Total	power	 savings to the factory default settings.
Factory	defaultWarning log
This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological...

Setting
59
Input	Source	Information	Display
The Information Menu is used for checking the status of the image signal\
 being projected and the operation of the projector.
H-sync	freq.
V-sync	freq.
Lamp counter
Information	Menu
The horizontal frequency of the input signal is displayed in KHz, or - - - - KHz	when no signal.
The vertical frequency of the input signal is displayed in Hz, or -	-	-	-	Hz	when no signal. Numbers of Hz doubles when during Interlace.
The cumulative lamp operating time is...

60
The WARNING indicator shows the state of the function which protects the proj\
ector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. 
WARNING	indicator
The	projector	is	shut	down	and	the	WARNING	indicator	is	blinking	red.
When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the...