Eiki Projector Lc Wb200 User Manual

							Multimedia  Projector 
MODEL LC-WB200
Network Supported  Wired LANRefer to the Owner's Manuals below for details about network function.
 Network Set-up and Operation
	PJ Network Manager
Owner's Manual 
						

							2
Features and Design
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77\
 million colors, and matrix liquid crystal display (LCD) technology.
♦	 Compact	Design
 This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use.
♦	 Simple	Computer	System	Setting
 The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.28). Up to WUXGA resolution can be accepted.
♦	 Useful	Functions	for	Presentations
 - The digital zoom function allows you to focus on the crucial information during a presentation (p.35) 
  - The MIC function and 10W audio output allows you to make a presentation without any external audio equipment (p.24).
♦	 Lamp	control
  Brightness of the projection lamp can be selected (pp.25, 54).
♦	 Direct	Off	Function
 With the Direct Off function, you can disconnect the power cord from the wall outlet or turn off the breaker even during projection (p.20).
♦	 Logo	Function
 The Logo function allows you to customize the screen logo (pp.46-48). You can capture an image for the screen logo and use it for the starting-up display or between presentations.
♦	 Picture	in	Picture	Function
 This projector is capable of projecting two images simultaneously by using either built-in P in P mode or P by P mode. (pp.26, 50) 
♦	 Multilanguage	Menu	Display
 Operation menu is available in 22 languages: English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh, Vietnamese, Chinese, Korean, Japanese and Thai (p.44).
♦	 Security	Function	
 The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control (p.55). PIN code lock function prevents unauthorized use of the projector (pp.19, 55-56).
♦ Helpful	Maintenance	Functions
 Lamp and filter maintenance functions provide for better and proper maintenance of the projector.
♦	 LAN	Network	Function	
 This projector is loaded with the Wired LAN network function. You can operate and manage the projector via network. For details, refer to the owner's manual of “Network Set-up and Operation.”
♦	 Auto 	Setup 	Function 	
 This function enables Input search, Auto Keystone correction and Auto PC adjustment by simple pressing the AUTO SETUP button on the top control (p.45).
♦	 Colorboard 	Function 	
   At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors.
♦	 Switchable	Interface	Terminal
 The projector provides a switchable interface terminal. You can use the terminal as computer input or monitor output conveniently (p.49).
♦	 Power	Management
 The Power management function reduces power consumption and maintains the lamp life (p.51).
♦	 Closed 	caption
    Closed Caption is a function that displays the audio portion of a TV program as text on the screen. You can turn on the feature and switch the channels. (p.53) 
						

							3
Table	of	Contents
TrademarksEach name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective corporation.
Features and Design  . . . . . . . . . . . . . .2
Table	of	Contents . . . . . . . . . . . . . . . . .3
To	the	Owner . . . . . . . . . . . . . . . . . . . . .4
Safety	Instructions . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position 6
Moving the Projector 6
Compliance . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions  . . . . . . . . .8
Front 8
Back 8
Bottom 8
Rear Terminal  9
Top Control  10
Remote control  11
Remote control Battery Installation 12
Remote control Operating Range 12
Remote Control Code 12
Installation . . . . . . . . . . . . . . . . . . . . . .13
Positioning the Projector 13
Adjustable Feet 13
Connecting to a Computer 14
Connecting to Video Equipment 15
Connecting to Component Video and 
RGB (Scart) Equipment 16
Connecting the AC Power Cord 17
Basic Operation  . . . . . . . . . . . . . . . . .18
Turning On the Projector  18
Turning Off the Projector 20
How to Operate the On-Screen Menu 21
Main Menu 22
Zoom and Focus Adjustment 23
Auto Setup Function 23
Keystone Correction 23
Sound Adjustment 24
Remote control Operation 25
Computer	Input	  . . . . . . . . . . . . . . . . .27
Input Source Selection 
(RGB: Computer 1/Computer 2)  27
Computer System Selection 28
Auto PC Adjustment 29
Manual PC Adjustment 30
Image Mode Selection  32
Image Adjustment 33
Screen Setting  34
Video	Input  . . . . . . . . . . . . . . . . . . . . .36
Input Source Selection (Video, S-video)  36
Input Source Selection 
(Component, Scart, HDMI) 37
Video System Selection  38
Image Mode Selection  39
Image Adjustment 40
Screen Setting 42
Setting . . . . . . . . . . . . . . . . . . . . . . . . .44
Setting 44
Information  . . . . . . . . . . . . . . . . . . . . .59
Input Source Information Display  59
Maintenance and Cleaning  . . . . . . . .60
WARNING indicator  60
Replacing the Filters 61
Resetting the Filter Counter 61
Attaching the Lens Cap 62
Cleaning the Projection Lens 62
Cleaning the Projector Cabinet 62
Lamp Replacement 63
Appendix . . . . . . . . . . . . . . . . . . . . . . .65
Troubleshooting 65
Menu Tree 68
Indicators and Projector Condition 70
Compatible Computer Specifications 71
Technical Specifications 73
Optional Parts 74
PJ Link Notice 75
Attaching the Filter Cover to the Projector 75
Configurations of Terminals  76
List of Picture in Picture 77
PIN code Number Memo 78
Dimensions 79 
						

							4
To	the	Owner
CAUTION:				TO	REDUCE	THE	RISK	OF	ELECTRIC	SHOCK,	DO	NOT	REMOVE	COVER	(OR	BACK).	NO	USER-SERVICEABLE	PARTS	INSIDE	EXCEPT	LAMP	REPLACEMENT.	REFER	SERVICING	TO	QUALIFIED	SERVICE	PERSONNEL.
THIS	SYMBOL 	INDICATES	THAT	DANGEROUS	VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	SHOCK	IS	PRESENT	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	ARE	IMPORTANT	OPERATING	 AND	MAINTENANCE	INSTRUCTIONS	IN	THE	OWNER'S	MANUAL	WITH	THIS	UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK
DO	NOT	OPEN
Before installing and operating this projector, read this manual thoroughly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section on pages 65-67 of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center.
     Safety	Precaution
CAUTION
DO	NOT	SET	THE	PROjECTOR	IN	GREASY ,	WET,	OR	SMOKY	CONDITIONS	SUCH	AS	IN	A	KITCHEN	TO	PREVENT	 A	BREAKDOWN	OR	A	DISASTER.	IF	THE	PROjECTOR	COMES	IN	CONTACT	WITH	OIL	OR	CHEMICALS,	IT	MAY	BECOME	DETERIORATED.
READ	 AND	KEEP 	THIS	OWNER'S	MANUAL 	FOR	LATER	USE.
WARNING:		
  	THIS	APPARATUS	MUST	BE	EARTHED.
  		TO	REDUCE	THE	RISK	OF	FIRE	OR							ELECTRIC	SHOCK,	DO	NOT	EXPOSE	 							THIS	 APPLIANCE	TO	RAIN	OR			MOISTURE.
–  This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.–  Install the projector in a proper position. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.–  Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimension shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.
–  Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.–  If the projector is unused for an extended time, unplug the projector from the power outlet.–  Do not project the same image for a long time. The afterimage may remain on the LCD panels by the characteristic of panel.
SIDE and TOPREAR
0.7’(20cm)
1.5’(50cm) 3’(1m)
20cm
50cm 1m 1m
1.5’(50cm)
FOR	EU	USERSThe symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world.Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused.The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.Note:If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb: leadIn the European Union there are separate collection systems for used electrical and electronic equipment, batteries and accumulators.Please, dispose of them correctly at your local community waste collection/recycling centre.Please, help us to conserve the environmentwe live in!
																													CAUTIONNot for use in a computer room as defined in theStandard for the Protection of Electronic Computer/DataProcessing Equipment, ANSI/NFPA 75. 
						

							5
To	the	OwnerSafety	Instructions
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturers.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.
The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.
This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.Do not install the projector near the ventilation duct of air-conditioning equipment.
This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.
Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.
Do not attempt to service this projector yourself as opening or removing Covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions:a. When the power cord or plug is damaged or frayed.b. If liquid has been spilled into the projector.c.  If the projector has been exposed to rain or water.d.  If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.e. If the projector has been dropped or the cabinet has been damaged.f.  When the projector exhibits a distinct change    in performance-this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.
Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.
NOTE	FOR	CUSTOMERS	IN	THE	US Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. 
						

							6
Safety	Instructions
Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. 
–  Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.–  Keep the exhaust vent at least 3’ (1 m) away from any objects.– Do not touch a peripheral part of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.– Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.– Make sure that there is no object under the projector to prevent from covering the bottom openings.
Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.
Moving	the	Projector
When moving the projector, replace the lens cap and retract adjustable feet to prevent damage to the lens and cabinet.When the projector is not in use for an extended period, put it into the supplied carrying case with the lens side up.
Air	Circulation
Do not pitch the projector more than 40 degrees from above and below.
Do not point the projector up to project an image.
Do not point the projector down to project an image. 
Do not put the projector on either side to project an image. 
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
Do not roll the projector more than 20 degrees from side to side.
20°
20°
CAUTION	IN	CARRYING	OR	TRANSPORTING	THE	PROjECTOR
–   Do not drop or bump the projector, otherwise damages or malfunctions may result.–   When carrying the projector, use a suitable carrying case.–   Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.–  Do not put the projector in a case before the projector is cooled enough.
Installing	the	Projector	in	Proper	
Position
Exhaust Vent(Hot air exhaust)Air intake Vent
CAUTION
The carrying case (supplied) is intended for protection against dust and scratches on surface of the cabinet, and it is not designed to protect an appliance from external forces. Do not transport the projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the cabinet.
40°
40°
Air intake Vent
Compliance
Air Intake Vent
Exhaust Vent(Hot air exhaust) 
						

							Safety	Instructions
7
Compliance
Federal Communications Commission Notice
Note:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses,  and  can  radiate  radio frequency  energy,  and  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful interference  to  radio  communications.  However,  there  is  no  guarantee  that  interference  will  not  occur  in  a particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or  television  reception, which  can  be  determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the interference by one or more of the following measures:– Reorient or relocate the receiving  antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Use of shielded cable is required to comply with class B limits in Subpa\
rt B of Part 15 of FCC Rules.Do  not  make  any  changes  or  modifications  to  the  equipment  unless  otherwise  specified  in  the  instructions.  If such changes or modifications should be made, you could be required to s\
top operation of the equipment.Model Number      : LC-WB200Trade Name          : EIKIResponsible party : EIKI International,Inc.Address                : 30251 Esperanza Santa Margaria CA 92688-2123Telephone No.      : 800-242-3454 (949-457-0200)
The AC Power Cord supplied with this projector meets the requirement for use\
 in the country you purchased it.  
AC	Power	Cord	for	the	United	States	and	Canada:
AC Power Cord used in the United States and Canada is listed by the Unde\
rwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA).AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat \
this safety feature. Should you be unable to insert the plug into the outlet, contact your el\
ectrician.
AC	Power	Cord	Requirement
AC	Power	Cord	for	the	United	Kingdom:This cord is already fitted with a moulded plug incorporating a fuse, th\
e value of which is indicated on the pin face of the plug.  Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus A S A. If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is\
 of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are avai\
lable from the Parts Department indicated in your User Instructions.If the plug supplied is not suitable for your socket outlet, it should b\
e cut off and destroyed.The end of the flexible cord should be suitably prepared and the correct\
 plug fitted. WARNING	:	A	PLUG	WITH	BARED	FLEXIBLE	CORD	IS	HAZARDOUS	IF	ENGAGED	IN	 A	LIVE	SOCKET	OUTLET.The Wires in this mains lead are coloured in accordance with the followi\
ng code:  Green-and-yellow .....Earth Blue . . . . . . . . . . . . . . . .Neutral Brown...............LiveAs the colours of the wires in the mains lead of this apparatus may not \
correspond with the coloured markings identifying the terminals in your plug proceed as follows:The wire which is coloured green-and-yellow must be connected to the ter\
minal in the plug which is marked by the letter E or by the safety earth symbol  or coloured green or green-and-yellow.The wire which is coloured blue must be connected to the terminal which \
is marked with the letter N or coloured black.The wire which is coloured brown must be connected to the terminal which\
 is marked with the letter L or coloured red.WARNING:	THIS	 APPARATUS	MUST	BE	EARTHED.
THE	SOCKET-OUTLET	SHOULD	BE	INSTALLED	NEAR	THE	EQUIPMENT	 AND	EASILY	ACCESSIBLE.
GROUND 
						

							8
Part Names and Functions
Back
⑦⑩⑨
⑥
⑪
⑬
⑫⑧
① Infrared	Remote	Receiver② Zoom	Ring③ Focus	Ring④ Projection Lens
CAUTION
Do  not  cover  the  light  beam  in  front  of  the  lens. High  temperature  from  light  beam  may  damage the lens.
⑤ Lens Cap  (See page 62 for attaching.)
⑥ Speaker
⑦ Exhaust	Vents
  CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.  Do not put heat-sensitive objects near this side.
⑧ Lamp Cover⑨ Air	Intake	Vents⑩ Terminals	and	Connectors⑪ Top	Controls	and	Indicators⑫ LAN	Connection	Terminal⑬ Power Cord Connector⑭ Filter Covers⑮ Adjustable	Feet
 Note:
⑫ LAN Connection Terminal is for the Network      function. Refer to the owner's manual of      “Network Set-up and Operation”.
 Kensington	Security	Slot   This slot is for a Kensington lock used to     deter theft of the projector.*Kensington is a registered trademark of ACCO   Brands Corporation.
 CAUTION
Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens cap and result in fire hazard.
①⑤⑨③②
Front
④⑨
Bottom⑭
⑮ 
						

							9
Part Names and Functions
Rear	Terminal	
③④①⑤
⑥⑪⑦⑨⑧⑩
⑥ S-VIDEO	IN Connect the S-VIDEO output signal from video equipment to this jack (p.15).
⑧ AUDIO	IN Connect the audio output signal from video equipment connected to ⑥ or ⑨ to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.15).
⑩ COMPUTER	 AUDIO	IN	1 Connect the audio output (stereo) from a computer or video equipment connected to ② or ③ to this jack (pp.14, 16).
⑨ VIDEO	IN Connect the composite video output signal to this jack (p.15).
③ COMPUTER	IN	1	/	COMPONENT	IN Connect output signal from a computer, RGB scart 21-pin video output or component video output to this terminal (pp.14,16).
⑤ AUDIO	OUT	(VARIABLE) Connect an external audio amplifier to this jack (pp.14-16). This terminal outputs sound from AUDIO IN terminal (⑧, ⑩ or ⑪), or HDMI terminal (2)(digital audio).     Never plug headphones and earphones into this jack.
① LAN	Connection	Terminal Connect the LAN cable (refer to the owner’s manual of "Network Set-up and Operation").
⑦ CONTROL 	PORT When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable.
④ COMPUTER	IN	2	/	MONITOR	OUT     –   Connect computer output to this terminal (p.14).     –  
This terminal can be used to output the incoming analog RGB and Component signal from COMPUTER IN 1/COMPONENT IN terminal to the other monitor (pp.14,16).
⑪ COMPUTER	 AUDIO	IN	2	(MIC	IN) Connect the audio output (stereo) from a computer or video equipment connected to ④ to this jack. Or connect the MIC to the this jack (pp.14, 16).
②
② HDMI	Terminal Connect the HDMI signal (including sound signal) from video equipment or from computer to this terminal (pp.14, 15).
        
is registered trademarks of HDMI Licensing, LLC. 
						

							10
Part Names and Functions
Top	Control
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑨ LAMP	REPLACE	indicator Lights yellow when the projection lamp reaches its end of life (pp.63, 70).
⑧ WARNING	indicator – Lights red when the projector detects an       abnormal condition.  –  Blinks red when the internal temperature of       the projector exceeds the operating range       (pp.60, 70).
④ ON/STAND-BY 	buttonTurn the projector on or off (pp.18-20).
⑤ POWER	indicator –  Lights red when the projector is in       stand-by mode.  –  Lights green during operations.  –  Blinks green in the Power management       mode (p.51).
③ INPUT	buttonSelect an input source (pp.27, 36-37).
⑥ MENU	button  Open or close the On-Screen Menu (p.21).
② POINT▲▼◄►	(VOLUME	–/+)	buttons –  Select an item or adjust the value in the       On-Screen Menu (p.21).  –  Pan the image in the Digital zoom +/- mode       (p.35).	 –	 Adjust	the	volume	level	(Point	◄►	buttons)	      (p.24).
⑦ AUTO	SETUP 	button Execute the setting of Auto setup (includes Input search, Auto PC adj. and Auto Keystone functions) in the setting menu. (pp.23, 45).
① SELECT	button –  Execute the selected item (p.21).  –  Expand or compress the image in the        Digital zoom mode (p.35).