Eiki Projector Lc Wb200 User Manual

Multimedia  Projector 
MODEL LC-WB200
Network Supported  Wired LANRefer to the Owner's Manuals below for details about network function.
 Network Set-up and Operation
	PJ Network Manager
Owner's Manual 

2
Features and Design
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77\
 million colors, and matrix liquid crystal display (LCD) technology.
♦	 Compact	Design
 This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use.
♦	 Simple	Computer	System	Setting
 The projector has the Multi-scan system to conform to...

3
Table	of	Contents
TrademarksEach name of corporations or products in this book is either a registere\
d trademark or a trademark of its respective corporation.
Features and Design  . . . . . . . . . . . . . .2
Table	of	Contents . . . . . . . . . . . . . . . . .3
To	the	Owner . . . . . . . . . . . . . . . . . . . . .4
Safety	Instructions . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position 6
Moving the Projector 6
Compliance . . . . . . . . . . . . . . . . . . ....

4
To	the	Owner
CAUTION:				TO	REDUCE	THE	RISK	OF	ELECTRIC	SHOCK,	DO	NOT	REMOVE	COVER	(OR	BACK).	NO	USER-SERVICEABLE	PARTS	INSIDE	EXCEPT	LAMP	REPLACEMENT.	REFER	SERVICING	TO	QUALIFIED	SERVICE	PERSONNEL.
THIS	SYMBOL 	INDICATES	THAT	DANGEROUS	VOLTAGE	CONSTITUTING	 A	RISK	OF	ELECTRIC	SHOCK	IS	PRESENT	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES	THAT	THERE	ARE	IMPORTANT	OPERATING	 AND	MAINTENANCE	INSTRUCTIONS	IN	THE	OWNER'S	MANUAL	WITH	THIS	UNIT.
CAUTION
RISK	OF	ELECTRIC	SHOCK
DO	NOT	OPEN
Before installing...

5
To	the	OwnerSafety	Instructions
All the safety and operating instructions should be read before the product is operated.
Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods...

6
Safety	Instructions
Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. 
–  Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.–  Keep the exhaust vent at least 3’ (1 m) away from...

Safety	Instructions
7
Compliance
Federal Communications Commission Notice
Note:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against harmful  interference  in  a  residential  installation.  This  equipment  generates,  uses,  and  can  radiate  radio frequency  energy,  and  if  not  installed  and  used  in  accordance...

8
Part Names and Functions
Back
⑦⑩⑨
⑥
⑪
⑬
⑫⑧
① Infrared	Remote	Receiver② Zoom	Ring③ Focus	Ring④ Projection Lens
CAUTION
Do  not  cover  the  light  beam  in  front  of  the  lens. High  temperature  from  light  beam  may  damage the lens.
⑤ Lens Cap  (See page 62 for attaching.)
⑥ Speaker
⑦ Exhaust	Vents
  CAUTION
Hot  air  is  exhausted  from  the  exhaust  vent.  Do not put heat-sensitive objects near this side.
⑧ Lamp Cover⑨ Air	Intake	Vents⑩ Terminals	and	Connectors⑪ Top	Controls	and	Indicators⑫...

9
Part Names and Functions
Rear	Terminal	
③④①⑤
⑥⑪⑦⑨⑧⑩
⑥ S-VIDEO	IN Connect the S-VIDEO output signal from video equipment to this jack (p.15).
⑧ AUDIO	IN Connect the audio output signal from video equipment connected to ⑥ or ⑨ to this jack. For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.15).
⑩ COMPUTER	 AUDIO	IN	1 Connect the audio output (stereo) from a computer or video equipment connected to ② or ③ to this jack (pp.14, 16).
⑨ VIDEO	IN Connect the composite video...

10
Part Names and Functions
Top	Control
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑨ LAMP	REPLACE	indicator Lights yellow when the projection lamp reaches its end of life (pp.63, 70).
⑧ WARNING	indicator – Lights red when the projector detects an       abnormal condition.  –  Blinks red when the internal temperature of       the projector exceeds the operating range       (pp.60, 70).
④ ON/STAND-BY 	buttonTurn the projector on or off (pp.18-20).
⑤ POWER	indicator –  Lights red when the projector is in       stand-by mode.  –...