Eiki Projector Lc Wb200 User Manual

Computer	Input
31
Computer	Input
Store
To store the adjusted data, select Store and then	press	the	Point	►	button	or	the	SELECT	button. Move the highlight to one of the Mode 1 to 10 in which you want to store, and then press the SELECT button.
Mode	free
To clear the stored data, select Mode	free and then	press	the	Point	►	button	or	the	SELECT	button. Move the highlight to the Mode that you want to clear and then press the SELECT button.
Note:	 •	Display	area	(H/V)	cannot be selected when 480i, 575i,...

32
Computer	Input
Image	select	Menu
IMAGE	button
Dynamic
Real
Image	1
Image	2
Image	3
Image	Mode	Selection	
Image	4
Blackboard(Green)
Standard
Remote	control
IMAGE	button
Select the desired image mode among Dynamic, Standard, Real, Cinema, Blackboard	(Green), Colorboard, Image	1, Image	2, Image	3 and  Image	4 by pressing the IMAGE button on the remote control.
Standard
Picture mode with improved halftone for graphics.
Real
Blackboard	(Green)
Image	1-4
For the image projected on a blackboard.This mode...

Computer	Input
33
Computer	Input
Image	Adjust	Menu
Image	Adjustment
Reset
Press the MENU button to display the On-Screen	Menu.		Use	the	Point	▲▼	buttons to select Image	adjust and then press	the	Point	►	button	or	the	SELECT 	button.
1
2Use	the	Point	▲▼	buttons	to	select	the	desired item and then press the SELECT button to display the adjustment dialog box.  Use the Point ◄► buttons to adjust the setting value.
Note:•	When	White	balance	Red, Green or Blue is    adjusted, Color temp . will change to...

34
Computer	Input
Screen Setting 
Press the MENU button to display the On-Screen	Menu.	Use	the	Point	▲▼	buttons	to select Screen and then press the Point ►	button or the SELECT button.
Use	the	Point	▲▼	buttons	to	select	the	desired item and then press the SELECT button.
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Screen Menu
Provide the image to fit the screen size.Normal
TrueProvide  the  image  in  its  original  size.  When  the original...

Computer	Input
35
Computer	Input
Select Digital	zoom	+. The On-Screen Menu disappears and D.	zoom	+ appears. Press the SELECT button to expand the image size. Use the	Point	▲▼◄► buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be	also	expanded	by	pressing	the	D.ZOOM	▲	or	the SELECT button. 
To exit the Digital zoom +/– mode, press any button except the D.ZOOM ▲▼, SELECT and Point buttons.
Digital	zoom	+
Select Digital	zoom...

36
Video	Input
Choose VIDEO or S-VIDEO by pressing the INPUT button on the top control, or the VIDEO or the S-VIDEO button on the remote control.Before using these buttons, correct input source should be selected through menu operation as described below.
1
2
Video
Input	Source	Selection	(Video,	S-video)
Direct Operation
S-video
Note:   When  the  Input  search  function  is  set  to On  1  or On  2  in  the  Auto  setup  function,  the  input  signal will be searched automatically (p.45).
Remote...

37
Video	InputVideo	Input
Choose Computer	1(Component) or Computer	1	RGB	(Scart) by pressing the COMPONENT or the COMPUTER 1 button on the remote control. Choose HDMI by pressing the HDMI button on the remote control or you can press the INPUT button on the top control to choose the desired input source.Before using these buttons, correct input source should be selected thro\
ugh Menu operation as described below.
1
Input	Menu
2Use	the	Point	▲▼	buttons	to	select	Computer 1 and then press the Point ►...

38
Video	Input
Video	System	Selection
1AV	System	Menu	(Video	or	S-video)
AV	System	Menu	(Component)
2
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC	4.43, PAL-M and PAL-N.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, select a specific component video signal format from...

Video	Input
39
Video	Input
Image	select	Menu
Image	Mode	Selection	
Remote	control
IMAGE	button
Standard
Picture mode with improved halftone for graphics.
Blackboard	(Green)
For the image projected on a blackboard.This mode helps enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.
Direct Operation
For viewing pictures in a bright room.
Normal picture mode preset on the projector.
For viewing with the user preset...

40
Video	Input
Image	Adjustment
1
2
Press the Point ◄ button to decrease the contrast, press the Point ► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness, press  the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten R/G/B tone, press the Point ► button to deepen R/G/B tone (from 0 to 63).
White	balance	(Red	/	Green	/	Blue)
Use the Point ◄► buttons to select the desired Color temp. level...