Eiki Projector Lc Wb200 User Manual

							Video	Input
41
Video	Input
An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ........  Disabled. L 1 ........  For an active picture. L 2 ........  For a still picture. Film .....	For	watching	a	film.	With	this	function,	the projector reproduces pictures faithful to the original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off ........  Disabled.  L 1 ........  Lower reduction  L 2 ........  Higher reduction
Note:   Progressive can not be selected when the input signal is 480p, 575p or 720p (p.38). 
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. 
Reset
Store
To store the adjusted data, select Store and press the Point ►	button or the SELECT button. Use	the	Point	▲▼	buttons	to	select	one	from	Image	1 to Image	4 and press the SELECT button. A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image	(1-4) in the Image Mode Selection on page 39.
Store Menu
A confirmation box appears and then select Yes. 
						

							42
Video	Input
Screen Setting
This projector has the picture screen resize function, which enables you\
 to customize the image size.
Normal
Screen Menu1
2
Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.
Custom adj .
Note:	 •	 When	no	signal	is	detected,	Normal is set automatically and the Aspect adjustment menu disappears.	 •	 The	adjustable	range	for	Scale	H/V and Position	H/V is limited depending on the input signal.
Full
Provide the full screen image.
Press the MENU button to display the On-Screen	Menu.	Use	the	Point	▲▼	buttons	to select Screen and then press the Point ►	button or the SELECT button.
Use	the	Point	▲▼	buttons	to	select	the	desired item and then press the SELECT button.
Adjust the screen scale and position manually with this function.Press the Point ►	button at Custom adj . and the Custom adjustment menu is displayed on the screen,	you	can	use	the	Point	▲▼	buttons	to	choose the item you want to adjust. Scale	H/V ......  Adjust the Horizontal/Vertical screen scale. H&V ...............  When set to On, the aspect ratio is fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio.  Position 	H/V ..  Adjust the Horizontal/Vertical screen position. Common .......  Save the adjusted scale or position to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale or position, press the SELECT button at Yes. When Custom is selected, the saved scale or position is used. Reset .............  Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at Yes.
CustomProvide the last stored aspect screen image. 
Wide	(16:9)
Provide the image at the 16:9 wide screen ratio.
ZoomPan the horizontal direction of the image and cut the vertical direction of the image to fit the screen size (16:9). Only for 4:3 video aspect ratio signals.
Natural wideExpand the right and left sides of images naturally without changing the center areas. 
						

							Video	Input
43
Video	Input
Keystone
This function is used to adjust keystone distortion of the  projected image. Use the Point ▲▼ buttons to choose the item you want to adjust. Keystone     
To correct keystone distortion, press the SELECT button.  Keystone appears on the screen. Use the Point ▲▼ buttons to correct keystone distortion (p. 23). Store      
To store or reset the keystone correction, press the Point ► button.    Store .......... 
Keep the keystone correction even when the AC power cord is unplugged.    Reset .......... 
Release  the  keystone  correction w h e n   t h e   A C   p o w e r   c o r d   i s unplugged.
Keystone
Ceiling
Rear
When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.
Rear
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.
Reset
Screen aspectThis function is used to project the image to a 4:3 or 16:9 projection screen.Default	(16:10) ....16:10 is the aspect of the                               LCD panel. The original                               Screen Menu is available.																16:9 ..... Set to a 16:9 projection                               screen.                  4:3 ......Set to a 4:3 projection screen.
Note:    When the 16:9 function is selected on Screen aspect menu,  Wide (16:9) is not available in the PC and AV screen (pp.34, 42). 
						

							44
Setting
Setting MenuPress the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to select Setting and press the Point ►	button or the SELECT button to access the submenu items.
1
2Use the Point ▲▼ buttons to select the desired item and then press the Point ►	button or the SELECT button to access the selected item.
This projector has a Setting menu that allows you to set up the other va\
rious functions described below.
Language
Menu position
This function is used to change the position of the On-Screen Menu. Select Menu position and press the SELECT button.  
The Menu position changes each time you press the SELECT button as follows.the	center	→	the	bottom	left	→	the	bottom	right	→	the	top	left	→	the	top	right→.....
3Use the Point ▲▼ buttons to select the desired item and then press the SELECT button.
Language
The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Polish, Hungarian, Romanian, Czech, Russian, Turkish, Arabic, Kazakh, Vietnamese, Chinese, Korean, Japanese and Thai.
Setting 
						

							45
SettingSetting
Note:		•	 During	Input	search is in progress, If the MENU button or the ON/STAND-BY button is pressed, Input	search will stop. If the COMPUTER 1/2 or VIDEO or COMPONENT or S-VIDEO or HDMI button is pressed, Input	search will stop and go back to the button's input signal. 		•	Input	search, Auto	PC	adj. and Auto	keystone can not be set Off at the same time.  		•	Auto	keystone corrects vertical distortion only, not correct horizontal distortion.		•	 The	Auto	keystone	function	can	not	work	when	the Ceiling feature is set On in the Screen menu (pp. 35, 43).		•	 Perfect	correction	of	the	image	distortion	can	not	be ensured with the Auto setup function. If the distortion is not corrected properly by pressing the AUTO SETUP or the AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (pp. 35, 43).		•	Fine	sync, Total	dots, Horizontal and Vertical of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp. 30-31).
Auto	setup
Input	searchThis function detects the input signal automatically. When a signal is found, the search will stop. Use the Point ▲▼ buttons to select one of the following options.		Off .......  Input search does not work.  On 1..... Input search works under the following situation.  – When pressing the AUTO SET  button on the remote control.  – When pressing the AUTO SETUP  button on the top control.  On 2......Input search works under the following                situation.  – When turning on the projector by pressing the ON/STAND-BY button on the top control or the remote control.  – When pressing the AUTO SET button on the remote control.  – When pressing the AUTO SETUP  button on the top control.  – When the current input signal is cut off.** If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when On-Screen menu is displayed.
Auto	PC	adj.
On...............Enables Auto PC Adjustment when                       pressing the  AUTO SET button                     on the remote control or the AUTO                     SETUP button on the top control.Off...............Disables Auto PC Adjustment.
	Auto	keystone 		 Auto..........Always works and corrects                     keystone distortion according to the                     projector's tilt.  Manual......Works only when pressing the                       AUTO SET button on the remote                      control or the AUTO SETUP button                      on the top control.		Off.............Disables Auto Keystone.
Auto	setup
Note:	 •	 While	Input	search is set to On 1 or On 2, the status of Input and Lamp are displayed every time the signal is switched.	 •	 Only	the	last	selected	input	source	can	be	detected.
This function enables Input search, Auto PC adj. and Auto Keystone adjustment by pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control. Settings for those functions can be altered as follows:  
						

							46
Setting
This function decides whether to display On-Screen Displays. On ........................  Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. Countdown	off ...  Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off ........................  Hide the On-Screen Displays except:  ● On-Screen Menu.  ● Power	off? (p. 20)  ● P-Timer display.   ● No signal for Power                                      management (p. 49)  ● Please wait  . . .  ● Arrows for the True                                     function in the Screen                                     Menu. (p. 34)
Background
Select the background screen for when no input signal is detected. Press the Point ▲▼ buttons to switch between each option. Blue........Project a blue background. User........Project an image captured in the Logo                  setting. Black......Project a black background.
Display
Logo	(Logo	and	Logo	PIN	code	lock	settings)
Logo select
This function allows you to customize the screen logo with Logo select, Capture, Logo	PIN	code	lock and Logo	PIN	code	change functions.
Note:   When On is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected.
Logo select
This function decides on the starting-up display from among following options.  User .......  Show the image you captured.   Default ...  Show the factory-set logo.  Off ..........  Show the countdown display only. 
						

							Setting
47
Setting
Capture
Capture
This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.
Select Capture and press the SELECT button.  A confirmation box appears and select Yes to capture the projected image.
After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button (p. 26). 
To cancel the capture function, select Yes in the Quit? confirmation box.
Note:	 •	 Before	capturing	an	image,	select	Standard in the Image select Menu to capture a proper image (pp. 32 ,39).	 •	 The	output	image	resolution	from	a	computer	can	be supported up to the panel resolution (1280 x 800).	 •	 When	capturing	the	image	that	has	been	adjusted	by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. 	 •	 When	Logo	PIN	code	lock	function	is	set	to	On, Logo select and Capture can not be selected.  	 •	 When	starting	to	capture	a	new	image,	the	previously stored image is cleared even if you cancel the capturing.		•	 When	there	is	no	captured	image	or	it	is	interrupted while capturing an image, User can not be selected, you can only switch between Default and Off.
Logo	PIN	code	lock
This function prevents an unauthorized person from changing the screen logo.
 Off ..........  The screen logo can be changed freely from the Logo Menu (p. 46). On ..........  The screen logo cannot be changed without a Logo PIN code.If you want to change the Logo	PIN	code	lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo	PIN	code is set to “4321” at the factory.
Logo	PIN	code	lock 
						

							48
Setting
Enter	a	Logo	PIN	codeUse the Point ▲▼ buttons to enter a number. Press the Point ◄► buttons to fix the number and move the red frame pointer to the next box. The number changes to . If you fixed an incorrect number, use the Point ◄► buttons to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector.
If you entered an incorrect Logo PIN code, Logo PIN	code and the number () will turn red for a moment. Enter the correct Logo PIN code all over again.
Logo	PIN	code	changeLogo PIN code can be changed to your desired four-digit number. Press the SELECT button to select Logo	PIN	code	change. Current logo PIN	code	dialog box appears, use the Point ▲▼buttons to enter the current code. The New logo PIN code input dialog box appears. Set a new Logo PIN code, confirmation box appears, choose Yes to set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no longer change the Logo PIN code setting. 
Use the Point ▲▼	buttons to switch On or Off, and then press the SELECT button to make a choice.
Change	the	Logo	PIN	code	lock	setting
Enter	a	Logo	PIN	code
After a correct Logo PIN code is entered, the following dialog box appears.
Change	the	Logo	PIN	code	lock	setting
Change	the	Logo	PIN	code
CAUTION:WHEN	YOU	HAVE	CHANGED	THE	LOGO	PIN	CODE,	WRITE	DOWN	THE	NEW	PIN	CODE	IN	COLUMN	OF	THE	LOGO	PIN	CODE	NO.	MEMO	ON	PAGE	78	,	AND	KEEP	IT	SECURELY.	SHOULD	THE	LOGO	PIN	CODE	BE	LOST	OR	FORGOTTEN,	THE	LOGO	PIN	CODE	SETTING	CAN	NO	LONGER	BE	CHANGED. 
						

							Setting
49
Setting
HDMI	setup
HDMI	setup
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.9). Select Computer 2 or Monitor out with the Point ▲▼ buttons.
 Computer 2 ....... computer input Monitor out ........... monitor out
Terminal function is not available when selecting Computer 2 to the input source.  Change the input source to the others (Computer	1,	and so on) so that the Terminal function will be available. (pp. 25, 27, 37)
This function is only used for HDMI input source.
ImageSelect Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment.
Sound				HDMI:  When using the HDMI cable, select HDMI.   
     Both video and audio are       transferred and you need not to        connect any additional cables for      audio. Computer 2:  When using the DVI-HDMI  cable, select Computer 2 and connect the audio cable to COMPUTER IN 2 termimal.
The names for the output setting of Digital RGB vary from equipment to equipment. For details, refer to the owner’s manual of your Digital RGB equipment.When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital RGB output equipment. 
						

							50
Setting
Picture in Picture
Picture in Picture
 
Select the Picture in Pictrue mode among P in P, P	by	P and Off.
  Mode
P 	in	P:	  Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu. P 	by	P:  Provide the images of Main picture and Sub picture at the ratio of Screen aspect in the Screen Menu.						Off:	Turn off the Picture in Picture function. 
  Subpicture	size
Press the Point ◄► buttons to change the Subpicture size among Small, Middle and Large.
Selecting	the	Sub	pictureDuring Picture in Picture mode, and being undisplayed On Screen Menu, press the SELECT button to select Sub picture. (A red frame will be displayed on the selected picture.)
Switching	Input	SourceWhen Main picture or Sub picture is selected, input source can be set by pressing the INPUT button on the top control or COMPUTER1/2 or HDMI buttons on the remote control.
Note:•	 The	Picture	in	Picture	function	is	not	  available depending on the input signals and  the selected input terminals. Refer to List	of	  Picture in Picture for details. (p.77)
• When the input signal(s) is/are incompatible,        mark will be displayed on the Main/Sub   picture.
• Subpicture	size	and Subpicture	position	  works only under P in P mode.
This function is used to project two images simultaneously by placing a separate small sub screen within or next to the main screen.Use the Point ▲▼ buttons to select Picture in Picture and then press the SELECT button or the Point ►	button to access the submenu. Only the sound from the source of Main picture is valid, while the source of Sub picture cannot output the sound. ( In P in P, the larger picture is main picture, and the smaller one is sub picture; in P by P, the left picture is main picture, and the right one is sub picture.)
  Subpicture	position
Adjust the Subpicture position.Press the Point ◄► buttons to change the Subpicture position.
X