Eiki Projector Lc Hdt700 User Manual
Have a look at the manual Eiki Projector Lc Hdt700 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 ENGLISH SNMP setting Check and delete the trap address Checking the registered trap address and deleting the address. To delete the address, tick check box in front of the IP address and click Delete button. ✐ Up to 10 trap addresses can be registered. Trap check/delete Trap option Trap option setting Tick check boxes in front of the condition item to send the trap. ✐ Click Set button if you tick or un-tick the check box on a page. ✐ "When PJ lamp is off " signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/STANDBY button on the side control or the remote control. ✐ Up to 99,999 hours can be set for the time setting.
ENGLISH 33 ENGLISH Chapter 4 Controlling the Projector4 Describes controlling and setting of the projector by using the web browser.
34 Chapter 4 Controlling the Projector Power control and status check Click Power & Status on the main menu. The control page will be dis - played. By clicking ON or Standby button on the page, the power of the projector can be controlled. Item Description PJ status Power ......................... Displays the status of the lamp. (ON, OFF, On starting up, On cooling down, Service in need) Status .......................... Displays the status of the projector's power. (Refer to next page.) Power control ........ Controls the projector power by clicking the "ON" or "Standby" button. PJ temp. External temp. A . . Displays the temperature around the remote control receptor at the front of the projector. Inside temp. A ...... Displays the surrounding temperature of lamp in the projector. Inside temp. B ....... Displays the surrounding temperature of panel in the projector. * The warning icon will appear if the temperature exceeds a specified value. Check if there is no object to obstruct the airflow around the intake or exhaust vent. It might be airfilter clogged. Replace the airfilter with new one. * The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting". (+p.22) Popup confirmation window Confirmation window as shown in the below appears when the Standby button is pressed. ✐ The projector cannot be turned on while the projector is on cooling down. ✐ The web browser checks and updates the projector's condition every 30 seconds automatically. Warning temperature icon
35 ENGLISH About projector condition Status Description Normal ............................................................... Projector is operating normally. Power management in operation ........... Power management is operating Lamp failure ................................................... Lamp failure is occurring Abnormal temperature .........................The temperature of the projector became too high Standby after Abnormal Temp. ........ Projector detects abnormal temp. and sets into standby mode. Power failure ................................................ Power failure has occurred inside the projector. Projector is turned off. Unplug the AC cord and ask servicing to a qualified service personnel. Power control and status check When a security (PIN code lock) has been set on the projector, you also cannot control it through the network. To control the projector through the network temporarily, execute "PJ lock suspend" command to unlock the security. "PJ lock suspend" is on setting sub menu [2] on Setting main menu. ( +p.42)
36 Chapter 4 Controlling the Projector Control Click Control on the main menu. The setting method differs depending on the contents of the page. Click on the page number to change pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further information of each control item. ✐ The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display. For further information , refer to the projector's owner's manual. ✐ When the projector is in standby, all the controlling items are inactive. Item Description Input ......................... Selects input mode of the projector. Source ..................... Selects signal source of the input. RGB : RGB (PC analog) RGB (Scart) RGB (PC digital) RGB (AV HDCP) HDMI 5BNC : Video Y, Pb/Cb, Pr/Cr RGB VIDEO : Video Y, Pb/Cb, Pr/Cr S-video Input This function is to select the input mode and source mode of the projector. Click Set but - ton after selecting the input and source mode.
37 ENGLISH System This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu but- ton according to the input signal. Selec t a system and then click Set button. Control ✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" ( + p.39) is available, they are also listed together with the above mode. Available selection at the RGB(PC analog) input Item Description XGA1 ........................ It automatically switches to the proper computer system of the input signal. * The computer system modes ( VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which meet the input signal are listed. Available selection at the RGB(PC digital), RGB(AV HDCP) or HDMI input Item Description D-XGA ...................... It automatically switches to the proper computer system of the input signal. * The computer system modes (D-VGA, D-SVGA, D-XGA. D-SXGA1...) which meet the input signal are listed. D-480p .................... It automatically switches to the proper scanning system of the input signal. * The selectable scanning systems are D-480p, D-575p, D-720p, D-1035i, D-1080i and D-1080p. Available selection at the Video/S-video/Scart input Item Description AUTO ........................ It automatically switches to the proper color system of the input signal. * The selectable color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N. * AUTO is fixed at the Scart input. Available selection at the Component input Item Description AUTO ........................ It automatically switches to the proper scanning system of the input signal. * The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i, 1080i and 1080p.
38 Chapter 4 Controlling the Projector Item Description Contrast .............................. Adjusts picture con- trast. (0~ 63) Brightness ......................... Adjusts picture bright - ness. (0~ 63) Color ...................................... Adjusts picture color saturation. (0~ 63) Tint ......................................... Adjusts picture hue. (0~ 63) Color temp. ....................... Sets a color temperature mode. (X Low, Low, Mid, High, Adj.) White balance Red, Green, Blue ..... Adjusts each white balance respectively. (0~ 63) * When changing the value of the white balance, the color temp. indicates "Adj." Offset Red, Green, Blue ..... Adjusts each offset respectively. (0~ 63) Auto picture control ....... Sets auto picture con- trol level. (OFF, L1, L2) Advanced color ............. Applies improved color adjustment with yellow light controller. (Auto, OFF) Sharpness .......................... Adjusts picture sharpness. (0~ 31) Gamma .................................. Adjusts brightness of darker part of the picture. (0~ 15) Noise reduction .............. Switches noise reduction mode (ON, OFF) Progressive ................................Switches progressive mode (OFF, ON, Film) Reset ...................................... Resets the Image adjustment to previous levels. Store ...................................... Stores the Image adjustment values. Select an item [Image1 - Image10] from the pull-down menu and click Store button. Load image mode ....... Loads the Image mode. Select an image mode from the pull-down menu and click Load button. There may not be available mode depending on the input mode as shown in the table left. Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button. Input sourceImage mode Video Computer Dynamic 4 4 Standard 4 4 Natural 4 * Cinema 4 * Real * 4 Image1 - 10 4 4 ✐ The mark "4" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".
39 ENGLISH PC adjustment PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode ...... Displays a current mode like VGA, SVGA, XGA. SXGA, UXGA, WXGA, etc. or Mode1 - Mode10 which are the customized mode created by using the "Mode Store" function described below. Auto PC adj.......... Performs automatic adjustment. Fine sync .............. Performs Fine Sync adjustment. (0 ~ 31) Total dots .............. Adjust the number of total dots in the horizontal period. Clamp .........................Adjusts the phase of the clamp. Display area Horizontal ..........Adjusts the image area horizontally. Vertical ..............Adjusts the image area vertically. Position Horizontal ....... Adjusts the horizontal position of the screen. Vertical ..............Adjusts the vertical position of the screen. Reset ......................... Resets the PC adjustments to the previous levels. Mode Store .......... Stores the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the pull-down menu. Mode Free ............ Clear the PC adjustment values. Select a mode no. [Mode1 - Mode10] from the pull- down menu.
40 Chapter 4 Controlling the Projector Setting up the projector Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting] or [Setting] and then set up each set - ting. Item Description Screen ..................... Switches the screen mode. (Normal, Full, Wide(16:9), Zoom, True, Natural wide, Custom) Ceiling ..................... Sets the image top/bottom and left/ right reversed. (ON, OFF) Rear ........................... Sets the image left/right reversed. (ON, OFF) * See the next page for the description of other functions. Screen setting This function is to adjust the screen mode or the lens functions of the projector.