Eiki Projector Lc Hdt700 User Manual

							21
ENGLISH
 
How to use the setting page
Radio button setting
Select an item by selecting a radio 
button.
Check box setting
Select items by ticking on check 
boxes. 
						

							22
Chapter 3 Basic Setting and Operation
Initial setting
After installing the projector, perform the following basic initial setting.
Click Initial Setting on the main menu to display the initial setting page.
Item  Description
Language  .............. 
Switches display language on the setting page. (Japanese, English)
Model name  ....... 
Indicates the model name of the projector
SERIAL NO.   ..........Indicates the serial number of the projector
Network PIN code  ......
 
Sets the Network PIN code to login the setting page (+p.23) 
Temperature  ....... 
Switches display temperature unit. (Centigrade, Fahrenheit)
PJLink  .......................  
Switches PJLink password authentication. (ON, OFF) 
(+p.23)Password ............... 
Password for PJLink function (+p.23)
* The serial number in the figure is used for an example. 
						

							23
ENGLISH
 
Initial setting
Network PIN code setting
This  is  to  set  the  Network  PIN  code  to  restrict 
the  access  from  an  unauthorized  person 
through the network. 
Enter  a  4- digit  number  as  the  Net work  PIN 
code onto the text box and click Set button. 
   The  projector  begins  restar ting  and  it  takes 
about  10  seconds.  Close  (Quit)  the  web  browser  and  access  to  the  login  page  again  in  10 
seconds. This is to perform the login authentication firmly.
The default Network PIN code [0000] means no Network PIN code is set.  
✐		 When you connect the projector to the network, it is recommended to set a new Network PIN 
code. Only a four-digit number is valid for the Network PIN code.
PJLink and password setting
This  is  to  set  the  PJLink  password  authentica -
tion  on  or  off.  If  set  "ON"  with  the  PJLink  pull-
down  menu,  the  password  must  be  required. 
Enter a  password * onto the text box and click 
Set  button. 
✐		  1 to 32 alphanumeric characters can be used for the password.
What's PJLink?
The projectors equipped with PJLink function can be used together on the same network, 
regardless  of  model  or  brand,  for  centralized  control  and  monitoring.  This  standard  was 
established  by  the  Japan  Business  Machine  and  Information  System  Industries  Association 
(JBMIA). Please visit the Website at http://pjlink.jbmia.or.jp/english/.
PJLink Notice
The  projector  is  compliant  with  PJLink  Standard  Class  1  of  JBMIA,  and  it  supports  all  com -
mands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
Projector Input PJLink InputParameter
Input 1 RGB (PC analog) RGB 111
RGB (Scart) RGB 212
RGB (PC digital) DIGITAL 131
RGB (AV HDCP) DIGITAL 232
HDMI DIGITAL 333
Input 2 Video VIDEO 121
Y, Pb/Cb, Pr/Cr VIDEO 222
RGB RGB 313
Input 3 Video VIDEO 323
Y, Pb/Cb, Pr/Cr VIDEO 424
S-video VIDEO 525
Input 4 NETWORK NETWORK 151 
						

							24
Chapter 3 Basic Setting and Operation
Network configuration
Click Network  on the main menu. The following setting page is displayed. 
The IP Address, Subnet Mask, Default Gateway, DNS (Domain Name Server) 
and projector name are set up on this menu.
The  IP  address  and  Subnet  Mask  have  been  configured  already  in  chapter 
"Installation".  If  you  want  to  change  them  or  configure  default  gateway  or  DNS,  perform 
them in this page. If you change them, the projector begins restarting and it takes about 10 
seconds. Close (Quit) the web browser and access to the login page again in 10 seconds. 
*1 Set [0.0.0.0] if the network does not provide the gateway (router).*2 Set [0.0.0.0] if you do not use the function E-Mail alert.
*3   If you use the DNS server, register the host name registered to the DNS server as a projector 
name. You can access with this projector name from any computers in your network. If you do not 
use the DNS server, access with the assigned IP address to the projector.
* All the network setting will reset to the default when setting [0.0.0.0] of the IP Address.
*   If you make incorrect settings, you cannot find out the new network settings. Be careful to set up 
them correctly, otherwise you cannot connect to the projector. It is recommended to make a note 
of them.
Item   Description
DHCP ............................  
Sets DHCP configuration (ON/OFF).
IP address  ................ 
Sets IP address of the projector
Subnet mask  .......... 
Sets Subnet mask. Normally sets 255.255.255.0
Default gateway*
1  ........  
Sets IP address of the default gateway (Router)
DNS*2  ..........................  
Sets IP address of the DNS server. Must be set when using the e-mail functionProjector name*3 ....  
Sets name of the projector. (64 characters maximum)
✐   You must use the number specified by your administrator. The address must be entered as a 
group with four numbers split by a dot like [192.168.001.101].
*  
The numerical value is a setting example. 
						

							25
ENGLISH
 
Item  Description
IP address  ................ 
Control System IP Address 
as a string. The default 
value is blank.
IP ID  ..............................   Control System IP ID as a 
string. The default value is 
blank.  
(from 3 to 254)
Port  ...............................   The default value is 41794.  
(from 1 to 65535)
Network configuration
You can use Crestron RoomView® to monitor 
and control the projector through the net -
work.
For more information, visit http://www.
crestron.com & www.crestron.com/getroom -
view.
If your network environment uses an 
AMX controller, select ON to allow the 
projector to be detected by AMX Device 
Discovery. (ON, OFF) For more details, visit 
http://www.amx.com/.
Crestron control
AMX D. D. 
						

							26
Chapter 3 Basic Setting and Operation
E-mail setting
This  projector  has  an  E-mail  function  which  can  send  an  alert  message 
to  users  or  an  administrator  if  it  detects  an  abnormality  on  the  projector 
or  run  out  of  the  life  span  of  the  lamp.  Click E-mail  Setting  on  the  main 
menu and follow the below steps.
Item   Description
SMTP server  ........................... 
Enter server name or IP address of the SMTP server. (up to 60 characters)SMTP server port  ...............  Enter Port number of the SMTP server. (from 1 to 65535)Administrator address  ....Enter e-mail address of administrator.
Add address  ........................... Enter e-mail address of the user to send mail when the projector has an 
abnormality.
Auth
   ............................................  Sets authentication setting option. (OFF, SMTP Auth, POP before SMTP)SMTP Auth  ..............................  Sets user authentication setting option when selecting "SMTP Auth" in above 
column. (CRAM-MD5, LOGIN, PLAIN)
User ID  .......................................   Enter SMTP user ID. (up to 63 characters)Password  .................................  Enter SMTP password. (up to 63 characters)
POP server ...............................  Enter server name or IP address of the POP server. (up to 60 characters)POP server port  ..................  Enter Port number of the POP server. (from 1 to 65535)
SMTP Authentication setting 
						

							27
ENGLISH
 
E-mail setting
✐  If the projector sends an alert message due to the abnormality on the projector but the SMTP 
server is down in some other reason, the message will not be sent. In this case, the message 
"Unable to connect to server." will be displayed on the setting page. To clear this message, set up 
SMTP server address again.
✐  To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.
✐   You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net -
work environment. 
✐    The projector does not send message to the address set in "Administrator address" text box. If 
you want to send e-mails to the administrator address, enter the administrator address into "Add 
address" text box.
1 Setting SMTP server and administrator address
Enter  the  server  name  or  IP  address  of  the 
SMTP  server*1,  t h e  p o r t  n u m b e r  o f  t h e 
SMTP  server  and  administrator  address  and 
click  Set  button.  The  administrator  address 
is  set  to  "Reply-To"  address  of  the  message 
sent from the projector.
*1   The SMTP server is a server for sending e-mail. Please contact your network administrator to 
have this SMTP server address.
2  Registering and deleting E-mail addresses
Enter  the  e-mail  address  onto  "Add  e-mail 
address" and click Set  button. 
To  check  the  registered  addresses,  click  
Check/Delete  sub menu tab. The address -
es are listed as the figure on the right.
✐ Up to 10 E-mail addresses can be registered.
To  delete  the  registered  addresses,  check  the 
address  you  want  to  delete  and  click  Delete 
button.
Check / Delete
3 Setting SMTP authentication
Set  the  SMTP  authentication  concerned 
and  click  Set  button.  Please  contact  your 
network administrator in details. 
						

							28
Chapter 3 Basic Setting and Operation
✐		"When PJ lamp is off " signifies the lamp goes out without user operation. "When PJ is turned into 
Standby  in proper user operation" signifies that the projector is turned on by using the web browser 
and then it is turned into standby with ON/STANDBY button on the side control or the remote control.
✐	Up to 99,999 hours can be set for use time.
Option5  Option selection for sending alert mail
Click  Option  sub menu tab. Check the con -
dition  items  under  which  alert  mail  will  be 
sent and click Set  button.
  Please  refer  to  item  "E xamples  :Type  and 
contents of alert mail" described on the next 
page.
Error message for sending alert mail
When  the  projector  has  an  abnormality,  an 
alert message will be sent to the registered 
E-mail address.
If the SMTP server is missing or the authen -
tication  is  not  completed  because  of  input 
error  in  E-mail  address  set ting  or  SMTP 
authentication  setting  when  sending  alert 
e-mail,  the  error  message  will  be  displayed. 
Please check the respective settings.
4 Setting POP server
W hen  "POP  b efore  SMT P "  is  sele c te d  at 
"Auth"  of  "SMTP  Authentication  setting", 
enter  "POP  server*
2"  and  "POP  server  port" 
and click Set  button.
*2  The POP server is a server for receiving e-mail. 
Please contact your network administrator to have this POP server address.
Error information
Error information
Error message for missing SMTP server
Error message for authentication problem 
						

							29
ENGLISH
 
E-mail setting
● When PJ lamp replacement time is reached:
✐  Replace it with a new lamp immediately and reset the lamp counter. If the projector is 
used without resetting the lamp counter, the alert mail is sent to users in every power-
on of the projector. This alert mail will not be sent when unchecking the mail sending 
condition "When PJ lamp replacement time is reached".
TITLE: Message from projector
Projector Model Name: model name
TCP/IP: 192.168.1.201 Projector Name: Proj05
It sends you following message.
* The projector lamp has reached replacement time. 
Lamp ON 2000 h
● When PJ needs service:
✐   The projector lamp was turned off, because the projector power circuit failed.
Unplug the AC power cord and plug it, and then turn on the projector once again to verify 
operation. If the problem still persists, unplug the AC power cord and ask servicing to a 
qualified service personnel with the error information.
Examples: Type and contents of alert mail
When  the  projector  has  an  abnormality,  the  following  alert  messages  are  sent  to  the  reg -
istered E-mail address according to your selected condition. Administrator or user can take 
an  efficient  action  quickly  by  receiving  this  message.  This  is  very  useful  to  maintain  and 
service the projector.
The following are examples of received messages.
● When internal PJ temperature is too high:
TITLE: Message from projector
Projector Model Name: model name
TCP/IP: 192.168.1.201 Projector Name: Proj05
It sends you following message.
*  The projector lamp is turned off because internal temperature goes over the safety limit.   
Wait for the completion of the cooling process and make sure the projector has been 
turned into Standby. Then turn the projector on again.  
If the Indicator continues flashing, check the air filter for dust accumulation.
TITLE: Message from projector
Projector Model Name: model name
TCP/IP: 192.168.1.201 Projector Name: Proj05
It sends you following message.
*   Maintenance requirement from Projector is detected. 
Check up LED status of projector and consult with the dealer.
AD,  3.3V OK
KS,  3.3V OK
---  --- ---
MAIN,  3.3V NG
---  --- ---
Error information 
						

							30
Chapter 3 Basic Setting and Operation
SNMP setting
This  projector  provides  a  SNMP  (Simple  Network  Management  Protocol) 
agent  function.  The  SNMP  consists  of  a  manager  and  agents.  The  group 
which  communicates  information  each  other  with  SNMP  is  called 
"Community".  There  are  two  access  modes  in  a  community,  Refer  (read  only)  and  Set  (read- 
write). This projector allows to use Refer (read only) only. The SNMP message informs the pro -
jector  status  called  "Trap"  to  an  administrator.  Click 
SNMP  Setting  on  the  main  menu  and 
set up each item.
Item   Description
Contact  ...............................................  
Enter user name of the projector etc. (optional)
Place  ..................................................... Enter place of the projector (optional)
Community name(refer)  ....... 
Enter community name (read only). Default name is "public". 
PJ information
Item
  Description
Community name  ...................... 
Enter community name to send "Trap". Default name is "public".
Trap address  ...................................  
Enter IP address of the SNMP manager computer to receive "Trap".
Trap