Eiki Projector Lc Hdt1000 User Manual

51

Video Input
✔Note:
• When no signal is detected, Normal is set 
automatically and the Aspect dialog box disappears.
• The adjustable range for Scale H/V and Position H/V 
are limited depending on the input signal.
•  Natural wide cannot be selected when 720p, 1035i, 
1080i or 1080p is selected on AV System Menu (p.46).
1

Press the MENU button to display the on-screen 
Menu. Use the Point ed buttons to select Screen and 
then press the Point 8 or the SELECT button
Use the Point  ed buttons to...

5

Video Input
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”
Ceiling 
Rear 
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to 
project the image from a ceiling-mounted projector.
When this function is set to On, the picture will be left/right 
reversed. This function is used to project the image...

5

Settings
Press the MENU button to display the On-Screen 
Menu.  Press the Point ed buttons to select Setting 
and press the Point 8 or the SELECT button to access 
the submenu items.
1
Use the Point ed buttons to select the desired item 
and then press the Point 8 or the SELECT button to 
access the selected item.
This projector has a Setting menu that allows you to set up 
the other various functions described below.
Use the Point ed buttons to select the desired item 
and then press...

54

Settings
Select the background color or image when no input signal 
is detected. Press the Point ed buttons to switch between 
each option.
 Blue ...................  Projects a blue background.
 User  ...................  Projects a captured image.
 Black  ..................  Projects a black background.
Allows you to select a lamp mode.
2-Lamps  ................Uses two lamps. 
1-Lamp  ..................Uses one lamp.
Auto: Automatically and preferentially 
uses a lamp with shorter cumulated...

55

Select the lamp operation when the total lighting time of a lamp 
exceeds the recommended total hours of use.
  Mode 1 ............  A lamp can be turned on even after 
exceeding the recommended total hours of 
use.
  Mode 2  ............  A lamp can be turned on even after 
exceeding the recommended total hours of 
use. But the projector turns off automatically 
after 3 minutes.
Lamp life control
✔Note
• Lamp mode cannot be changed for a while after turning on the 
projector. Lamp needs some time...

56

Settings
P in P: Provide the images of Main picture and Sub picture 
at the ratio of Screen aspect in the Screen Menu. 
P by P: Provide the images of Main picture and Sub picture at the ratio of 4:3.
  Mode
  Main picture / Sub picture
Input .....Select an input from Input 1-4. Source  ..  
Select an input source. The display varies depending on the selected input.Size  .......  
Select the display size. Main picture can be changed   between 10 and 100%, and Sub picture can be changed between 10 to...

57

Status (Stored /Free/ Adj.) of the selected mode
Settings
This function allows multiple projector images to be seamlessly 
overlapped.
When displaying multiple screens, eliminates the difference in 
color between the images that are projected from the projectors.
Use the Point ed buttons to select Edge blending and then 
press the SELECT button to display a dialog box. Use the Point 
ed7 8 buttons to adjust the setting value.
On/Off . . . . . . . . 
Set to On to activate the Edge blending...

5

Settings
Measured Information: When selecting “Measured Information”, 
the window shown right appears. Current 
image level is shown. When “image” is 
set to “Real” or “Cinema”, the “Standard” 
item in the window is activated. To go back 
to the “Advanced color matting” window, 
press any key. 
Advanced color matching: Press the POINT ed buttons to switch 
between “On” and “Off”. Selecting On 
displays the values which link to the Color 
Match values. 
Measured:   Displays the measured values of...

59

This function allows you to customize the screen logo with 
Logo select, Capture, Logo PIN code lock and Logo PIN code 
change functions.
✔Note
When On is selected in the Logo PIN code lock function, 
Logo select, Capture and Logo PIN code change cannot be 
selected.
Logo select
This function decides on the starting-up display from among 
following options. 
User ..........Shows the image you captured. 
Default  ......Shows the factory-set logo. 
Off  .............Shows the countdown display only....

60

This function prevents an unauthorized person from 
changing the screen logo.
 Off  .............  The screen logo can be changed freely from 
the Logo Menu (p.59).
  On  .............  The screen logo cannot be changed without a 
Logo PIN code.
If you want to change the Logo PIN code lock setting, 
press the SELECT button and the Logo PIN code dialog 
box appears. Enter a Logo PIN code by following the steps 
below. The initial Logo PIN code is set to "4321" at the 
factory.
Logo PIN code...