Eiki Projector Lc Hdt1000 User Manual

41

Clear the check mark if you do not want to apply the adjusted 
color data; select the check mark and then press the SELECT 
button. The check mark disappears.
LIST MODE
Return to the COLOR SELECTION mode so that you can 
readjust the setting for the color in that line. (This option is 
not available if the check mark is cleared.)
Select the DEL box if you want to delete the adjusted data. 
Press the SELECT button and a confirmation box appears and 
then select [Yes]. 
Delete all the data in the...

4

To reset the adjusted data, select Reset and press the 
SELECT button. A confirmation box appears and then select 
Yes. All adjustments will return to their previous figures. 
To store the adjusted data, select Store and press the 
Point 8 or the SELECT button. Use the Point ed buttons 
to select one from Image 1 to 10 and press the SELECT 
button. 
A confirmation box appears and then select Yes. Stored data 
can be called up by selecting an Image (1-10) in the Image 
Mode Selection on page 39....

4

Select the desired screen size that conforms to the input signal 
source.
Screen menu
Provides the image within a screen size keeping its original aspect ratio.
✔Note
• The  projector  cannot  display  any  resolution  higher  than 
2048  x  1080.  If  your  computer’s  screen  resolution  is 
higher  than  2048  x  1080,  lower  the  resolution  before 
connecting the projector.
•  The image data other than 2048 x 1080 is modified to fit 
the screen size in initial mode.
•  Full, Wide(16:9),...

44

Adjust the screen scale and position manually with this 
function.
Press the Point 8 button or the SELECT button at Custom 
adj. and Custom adj. is displayed on the screen, you can 
use the Point ed buttons to choose the item you want to 
adjust.
 Scale H/V  ...........  Adjusts the Horizontal/Vertical screen 
scale.
  H&V  ...................  When set to On, the aspect ratio is 
fixed. Scale V appears dimmed and 
becomes unavailable. Adjust Scale H, 
then the screen scale is automatically...

45

This function is used to adjust keystone distortion of the  
projected image. Use the Point ed buttons to choose the 
item you want to adjust.
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at Yes.
Ceiling 
Rear 
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to 
project the image from a ceiling-mounted...

46

If the projector cannot reproduce proper video image, 
select a specific broadcast signal format from among PAL, 
SECAM, NTSC, NTSC 4.4, PAL-M, and PAL-N.
The projector automatically detects an incoming video signal, 
and adjusts itself to optimize its performance.
When the Video System is   105i, 100i or  100p, select the 
system manually.
If the projector cannot reproduce proper video image, select 
a specific component video signal format from among  40i, 
575i, 40p,...

47

Video InputVideo Input
Normal picture level preset on the projector.
Picture level adjusted with fine tone.
User preset picture adjustment in the Image adjust 
Menu. (p.50)
Image select menu
1

Press the MENU button to display the On-Screen Menu. 
Use the Point ed buttons to select Image select and 
then press the Point 8 or the SELECT button.
Use the Point ed buttons to select the desired item 
and then press the SELECT button.
Image Selection
Menu Operation
For viewing pictures in a bright...

4

Video Input
1

Press the Point 7 button to decrease the contrast; press 
the Point 8 button to increase the contrast (from 0 to 63).
Press the Point 7 button to decrease the brightness; 
press the Point 8 button to increase the brightness (from 
0 to 63).
Press the Point 7 button decrease the intensity of the 
color; press the Point 8 button increase the intensity of 
the color (from 0 to 63).
Press the Point 7 8 buttons to adjust the tint value to get 
a proper color balance (from 0 to...

49

✔Note
• When White balance Red, Green or Blue is adjusted, the 
Color temp. level will change to Adj..
• Tint cannot be selected when the video system is PAL, 
SECAM, PAL-M or PAL-N (p.46).
Press the Point 7 button to lighten red/green/blue tone 
of the black level of an image; press the Point 8 button to 
deepen red/green/blue tone of the black level of an image 
(from 0 to 63).
Use the Point 7 8 buttons to select the desired Auto picture 
control option (Off, L1 or L2).
 Off
  . . . .  Auto...

50

Video Input
An interlaced video signal can be displayed in progressive 
mode. Press the Point 7 8 buttons to change the 
progressive scan mode.
 Off  .........  Progressive scan mode is Off.
  On  ..........  Progressive scan mode is On.
  Film  ........  For watching a film. With this function, the 
projector reproduces pictures faithful to the 
original film quality.
Noise interference on the screen can be reduced. Press the 
Point 7 8 buttons to change the noise reduction mode.
 Off  ............