Eiki Projector Lc Hdt1000 User Manual

MULTIMEDIA PROJECTOR
MODEL LC-HDT1000
OWNER’S MANUAL
✽ Projection lens not included. 



✔Note:
•The On-Screen Menu and figures in this manual may differ slightly from the product.
•The contents of this manual are subject to change without notice.
Features and Design
This  Multimedia  Projector  is  designed  with  most  advanced  technology  for  portability,  durability,  and 
ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix 
liquid crystal display (LCD) technology.
 ◆ Functionally Rich
 ◆ Simple Computer System...



Trademarks
Each name of corporations or products in this book is either a registered t\
rademark or a trademark of its respective corporation.
Table of Contents
Features and Design. . . . . . . . . . . . . . . .
Table of Contents  . . . . . . . . . . . . . . . . . .
To The Owner  . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions. . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Directions 7
Moving the Projector 
8
Compliance. . . . . . ....

4

CAUTION: TO   R E D U C E   T H E   R I S K   O F   E L E C T R I C 
S H O C K ,  D O   N OT   R E M OV E   C OV E R   ( O R 
BACK).  NO  USER-SERVICEABLE  PARTS 
I N S I D E   E XC E P T   L A M P   R E P L AC E M E N T.  
REFER  SERVICING TO  QUALIFIED  SERVICE 
PERSONNEL.
T H I S   SY M B O L   I N D I C AT E S   T H AT   DA N G E ROU S VOLTAGE  CONSTITUTING  A  RISK  OF  ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
T H I S   SY M B O L   I N D I C AT E S   T H AT   T H E R E   A R E I M P O RTA N...

5

All  the  safet y  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them  for 
later  use.    Unplug  this  projector  from  AC  power  supply 
before cleaning.  Do not use liquid or aerosol cleaners. Use a 
damp cloth for cleaning.
Follow all warnings and instructions marked on the projector.
 
For  added  protection  to  the  projector  during  a  lightning 
storm,  or  when  it  is  left  unattended  and...

6

Openings in the cabinet are provided for ventilation. To 
ensure reliable operation of the product and to protect 
it from overheating, these openings must not be 
blocked or covered. 
Air Circulation
Safety InstructionsSafety Instructions
IMPORTANT!
Filter Maintenance!!
Top Panel
WARNING FILTER
indicator
Fig.1   Filter replacement icon
Fig.     Filter cartridge replacement 
icon
EXHAUST VENT
AIR INTAKE VENT
The projector uses a lamp which generates 
significant heat. The cooling fans and air...

7

Safety Instructions
Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the 
functionality of the projector. Failure to so such will void any applicable warranties.
Cautious use of equipment with laser technology
Use the projector properly in specified positions. Improper positioning \
may reduce the lamp life and result in 
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular...



Moving the Projector
   CAUTION IN CARRyING OR 
TRANSPORTING THE PROJECTOR
–  Do not drop or bump the projector, other wise 
damages or malfunctions may result.
–   When carrying the projector, use a suitable 
carrying case.
–   Do not transport the projector by courier or any 
other transport service in an unsuitable transport 
case. This may cause damage to the projector. For 
information about transporting the projector by 
courier or any other transport service, consult your 
dealer.
–   Do...

9

AC Power Cord for the United Kingdom:
 This  cord  is  already  fitted  with  a  moulded  plug  incorporating  a  fuse,  the  value  of  which  is  indicated  on  the  pin 
face  of  the  plug.  Should  the  fuse  need  to  be  replaced,  an  ASTA  approved  BS  1362  fuse  must  be  used  of  the 
same  rating,  marked  thus ASA.  If  the  fuse  cover  is  detachable,  never  use  the  plug  with  the cover  omitted.  If  a 
replacement fuse cover is required, ensure it is of the same colour as that...

10

 
uert
Front
q
wyi
Back
Part Names and Functions
A	Kensington* Security Slot
This slot is for a Kensington lock used to 
deter theft of the projector.
* Kensington is a registered trademark of ACCO Brands Corporation.
t
 CAUTION
Hot air is exhausted from the exhaust 
vent. Do not put heat-sensitive objects 
near this side.
!0  Infrared Remote Receiver (Rear) 
!1 Exhaust Vent
!2 Main On/Off Switch
!3  Power Cord Connector
!4  Air Intake Vent
!5  Air Filter Cover
!3!1!2
!0
!4!5tt
A
q Lens Mount Cover...