Dukane Imagepro 8806 Portable Lcd Projector Users Manual

							
71
6. Using On-Screen Menu
[Entry Edit Command]
You can edit signals on the [Entry List].
Load ...................... Enables you to select a signal from the list.
Store ..................... Enables you to store the currently projected signal.
Cut ........................ Enables you to remove a selected signal from the list and place it on th\
e clipboard in the project or.
Copy ...................... Enables you to copy a selected signal from the list and place it on the \
clipboard in the projector.
Paste ..................... Enables you to paste the signal placed on the clipboard to any other l\
ine of the list.
Edit ........................ Enables you to change source names.
Source Name:
Enter a signal name. Up to 18 alphanumeric characters can be used.
Input Terminal:
Change the input terminal.
Lock:
Set so that the selected signal cannot be deleted when All Delete is e\
xecuted. After executing [Lock], the
changes cannot be saved.
Skip:
Set so that the selected signal will be skipped during auto search.
When complete, select OK and press ENTER. To exit without storing the setting, select Cancel. Select [Source
Name] and press ENTER to display the Source Name Edit window. You can change source name on this
window. Press   to display the software keyboard, which you can enter alphanumeric char\
acters. See page
128 for the key function of the software keyboard.
All Delete ............... This feature enables you to delete all the registered signals in the Entry List.
The following buttons are not available for the currently projecting sig\
nals: 1) The Cut and Paste buttons on the [Entry Edit Command] screen
2) The Input Terminal button on the [Entry Edit] screen
NOTE: When all the signals in the [Entry List] are deleted, the currently projected signal will be also deleted\
 except locked s ignals. 
						

							
72
6. Using On-Screen Menu
 Menu Descriptions & Functions [Adjust]
[Picture]
[Mode]
This function allows you to determine how to save settings for [Detail S\
ettings] of [Preset] for each input.
   Standard : Saves settings for each item of [Preset] (Preset 1 through 6)
   Professional : Saves all the settings of [Picture] for each input.
[Preset]
This option allows you to adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for
various types of images, you can set user adjustable settings. 
						

							
73
6. Using On-Screen Menu
[Detail Settings]
This will provide you with three pages of menus that provide more detail\
ed settings.
[General]
Selecting Reference Setting [Reference]
This feature allows you to use color correction or gamma values as refer\
ence data to optimize for various types of
images. You can select one of the following six settings.High-Bright ........ Recommended for the use in a brightly lit room.
Presentation ...... Recommended for making a presentation using a PowerPoint file.
Video ................. Recommended for regular picture such as TV program.
Movie ................ Recommended for movies.
Graphic .............. Recommended for graphics.
sRGB ................. Standard color values.
Selecting Gamma Correction Mode [Gamma Correction]
Each mode is recommended for: Dynamic ............ Creates a high-contrast picture.
Natural ............... Natural reproduction of the picture.
Black Detail ........ Emphasizes detail in dark areas of the picture.
Adjusting Color Temperature [Color Temperature]
This feature adjusts the color temperature using the slide bar.
Increase the color temperature for more bluish white; decrease it for mo\
re reddish white.
NOTE: • When [Presentation] or [High-Bright] is selected in [Reference], this fu\
nction is not available.• When [White Balance] settings has been changed, the color temperature va\
lue on screen does not reflect the real color
temperature.
[White Balance]
Adjusting White Balance [White Balance]
This allows you to adjust the white balance. Brightness for each color (\
RGB) is used to adjust the black level of the
screen; Contrast for each color (RGB) to adjust the white level of the\
 screen.
[Color Correction]
Selecting Color Correction [Color Correction]
Adjusts red, green, blue, yellow, magenta and cyan each independently to correct the tint of the whole s\
creen. 
						

							
74
6. Using On-Screen Menu
[Brightness]
Adjusts the brightness level or the back raster intensity.
[Contrast]
Adjusts the intensity of the image according to the incoming signal.
You have two options: Manual and Auto.
NOTE: The Auto Contrast function will not work when the menu or a messag\
e is displayed
[Sharpness]
Controls the detail of the image for Video (not valid for RGB and digital signals).
[Color]
Increases or decreases the color saturation level (not valid for RGB an\
d digital signals).
[Hue]
Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is only valid for
Video, Component and TV standard inputs (not valid for RGB and digital signals).
Input signal Brightness Contrast Sharpness Color Hue
Computer (RGB analog) Yes Yes No No No
Computer (RGB digital) Yes Yes No No No
Component Yes Yes Yes Yes Yes
Video, S-Video Yes Yes Yes Yes Yes
Viewer, LAN No No No No No
Yes=Adjustable, No=Not adjustable
[Reset]
The settings and adjustments for [Picture] will be returned to the facto\
ry settings with the exception of the following;
Preset numbers and [Reference] within the [Detail Settings] screen when \
[Standard] is selected in [Mode].
The settings and adjustments under [Detail Settings] within the [Preset]\
 screen that are not currently selected will not
be reset. 
						

							
75
6. Using On-Screen Menu
[Image Options]
Adjusting Clock and Phase [Clock/Phase]
This allows you to manually adjust Clock and Phase.
Clock ..................... Use this item to fine tune the computer image or to remove any vertical \
banding that might appear. Th is
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image.
This adjustment may be necessary when you connect your computer for the first time.
Phase .................... Use this item to adjust the clock phase or to reduce video noise, dot in\
terference or cross talk. (Thi s is
evident when part of your image appears to be shimmering.)
Use [Phase] only after the [Clock] is complete. 
						

							
76
6. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [Horizontal/Vertical Position]
Adjusts the image location horizontally and vertically.
Masking Unwanted Area [Blanking]
This feature allows you to mask any unwanted area of the screen image.
Selecting Overscan Percentage [Overscan]
Select overscan percentage (0%, 5% and 10%) for signal.
Projected image
Overscaned by 10%
NOTE: You cannot select [0%] for some input signals. 
						

							
77
6. Using On-Screen Menu
Input
Signal
Screen
Type
4:3 Screen
16:9 Screen 4:3
4:3 Window 4:3 Fill Squeeze
Wide Screen Wide Screen Crop
Letterbox
4:3 Letterbox Letterbox
Selecting Aspect Ratio [Aspect Ratio]
Screen Type 4:3 Screen Type 16:9
Aspect Ratio allows you to select the best Aspect mode to display your source image.
When screen type 4:3 is selected for the source, the following selection\
s will display:
4:3 ......................... Standard 4:3 aspect
Letter Box .............. Reduced to display the true aspect with black borders on top and bottom
Wide Screen .......... Left & Right stretched with black borders on top and bottom
Crop ...................... Left & Right stretched. Left & Right sides cut. Available for 4:3 only.
When screen type 16:9 is selected for the source, the following selectio\
ns will display: 4:3 Window ........... Reduced to display the true aspect with black borders on right and left
Letter Box .............. Standard 16:9 aspect
Wide Screen .......... Left and right stretched to display the true aspect
4:3 Fill ................... Stretched to display in 16:9 aspect ratio
NOTE: You can adjust image position vertically for a source with black borders on top and bottom. (→ page 88)
NOTE: Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue  such
as a coffee shop or hotel and employing compression or expansion of the \
screen image with a [Aspect Ratio] or [Screen] setting
may raise concern about the infringement of copyrights which are protected by copyright law.
NOTE: During 3D Reform adjustment, [Aspect Ratio] may not be available.
Should this happen, first reset the 3D Reform data and then do setting a\
gain. Second repeat the 3D Reform adjustment.
Changing the aspect ratio can limit 3D Reform in its adjustable range. 
						

							
78
6. Using On-Screen Menu
[Video]
Turning On/Off 3 Dimension Separation [3D Y/C Separation]
This function turns on or off the 3 dimensional separation feature. Off ............................... Turns off the function.
On Still ................. Recommended for a still image.
Normal ............ The projector detects and corrects the image automatically.
Movie .............. Recommended for a moving image.
TIP: 
When the image is poor quality, turn on [3D Y/C Separation]. If there is still poor quality, try turning off [Deinterlace] or t ry
turning off [3D Y/C Separation] and select [Normal] in [Deinterlace].
NOTE: This feature is available for NTSC3.58 of Video signal only.
Setting Vertical Edges [Vertical Enhancer]
This function enhances the vertical edges around objects in the image.
NOTE: This function is not available for an RGB, HDTV and Component sign\
al.
Selecting Interlace or Deinterlace [Deinterlace]
This function allows you to select between Interlace and Deinterlace\
.
Off ............................... Project the interlaced signal.
On Still ................. Select when a still image is displayed. When this option is selected for\
 a moving image, jitter or arti facts
can be seen.
Normal ............ The projector automatically determines a still or moving image to displa\
y a clear picture. If selecting [Normal] causes excess jitter or artifacts, select [Movie].
Movie .............. Select when a moving image is displayed. This will eliminate jitter and \
artifacts in a moving image. This option is available only for SDTV. 
						

							
79
6. Using On-Screen Menu
[Sound]
Controlling Sound [Volume/Bass/Treble/Balance]
Adjusts the volume, bass and treble level, left and right balance of the\
 projector speaker and AUDIO OUT (Stereo Mini
Jack).
Enabling 3D Surround [3D Surround]
Turn on or off the 3D surround effect.
If the AUDIO OUT stereo mini jack of the projector is connected to an external equipment\
, adjusting the sound on the
external equipment can cause sound to be distorted or cracked, depending\
 on the bass, treble or 3D Surround
adjustment. If this happnes, return the adjustments of the projector to \
the factory default (Bass:0, Treble: 0, 3D Sur-
round: Off).
Setting Telecine Mode [Telecine]
Use 3:2 pull down correction to eliminate jitter and artifacts in video.\
NOTE: This feature is available only when [Deinterlace] is turned on and\
 an SDTV signal is selected.
Off ..................................... Turns off the Telecine mode.
On 2-2/2-3 Auto ......... Detects pull-down correction method. 2-2 On .................. Uses 2-2 pull-down correction method
2-3 On .................. Uses 2-3 pull-down correction method
Setting Contrast Enhancement [Contrast Enhancement]
This function provides improvement of contrast using a proprietary detai\
l enhancement technology.
NOTE: This function is not available for Viewer or LAN.
Off ..................................... Turns off the Contrast Enhancement mode.
On ..................................... Turns on the Contrast Enhancement mode.
Split ................................... Turns on or off to show the effect of the Contrast Enhancement mode.
Adjust ................................ When the Contrast Enhancement mode is turned on or when [Split] is selec\
ted, you can adju st the
Contrast Enhancement level. 
						

							
80
6. Using On-Screen Menu
 Menu Descriptions & Functions [Setup]
[Basic]
Selecting Keystone Mode [Keystone]
This feature allows you to correct keystone distortion.
Selecting this item will display the Keystone setting menu.
You can correct vertical distortion manually from the menu. ( → page 
31)
Changes will be saved even when you turn off the projector.
NOTE: When [Cornerstone] is selected, [Keystone] is not available.
Selecting Cornerstone Mode [Cornerstone]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. ( → page 
41)
NOTE: When [Keystone] is selected, [Cornerstone] is not available.