Dukane Imagepro 8806 Portable Lcd Projector Users Manual

							
51
Structure of the HTTP Server
Power: This controls the power of the projector.On ................... Power is switched on.
Off ................... Power is switched off.
Volume: This controls the volume of the projector.  ..................... Increases the volume adjustment value.
 ..................... Decreases the volume adjustment value.
Mute: This controls the mute function of the projector. Picture On ....... Mutes the video.
Picture Off ....... Cancels the video muting.
Sound On ........ Mutes the audio.
Sound Off ........ Cancels the audio muting.
OSD On .......... Mutes the on-screen display.
OSD Off .......... Cancels the muting of the on-screen display.
All On .............. Mutes each of the video, audio, and on-screen display functions.
All Off .............. Cancels the muting of each of the video, audio, and on-screen display fu\
nctions.
Picture: Controls the video adjustment of the projector. Brightness  ... Increases the brightness adjustment value.
Brightness  ... Decreases the brightness adjustment value.
Contrast  ...... Increases the contrast adjustment value.
Contrast  ...... Decreases the contrast adjustment value.
Color  ........... Increases the color adjustment value.
Color  ........... Decreases the color adjustment value.
Hue  ............. Increases the hue adjustment value.
Hue  ............. Decreases the hue adjustment value.
Sharpness  ... Increases the sharpness adjustment value.
Sharpness  ... Decreases the sharpness adjustment value.
• The functions that can be controlled will vary depending on the signal b\
eing input to the projector. ( → page 
74)
4. Convenient Features 
						

							
52
Source Select: This switches the input connector of the projector.Computer1 ...... Switches to the COMPUTER 1 IN connector.
Computer2 ...... Switches to the COMPUTER 2 IN connector.
Computer3 ...... Switches to the COMPUTER 3 IN connector.
Component ..... Switches to the COMPONENT IN connectors.
Video ............... Switches to the VIDEO IN connector.
S-Video ........... Switches to the S-VIDEO IN connector.
Viewer ............. Switches to the data on the PC card or USB memory device.
LAN ................. Switches to a LAN signal.
Projector Status: This displays the condition of the projector. Refresh ....................... Updates the display of the following conditions.
Lamp Life Remaining..... Displays the remaining life of the lamp as a percentage.
Lamp Hours Used ....... Displays how many hours the lamp has been used.
Filter Hours Used ........ Displays how many hours the filter has been used.
Projector Hours Used . Displays how many hours the projector has been used.
Error Status ................. Displays the status of errors occurring within the projector.
4. Convenient Features 
						

							
53
4. Convenient Features
 Using the Projector to Operate a Computer Connected on a
Network (Desktop Control Utility 1.0)
When Desktop Control Utility 1.0 on the included User Supportware 3 CD-R\
OM is installed on the computer, that
computer can be operated using the projector over a network.
For example, say you have a PowerPoint file on a computer in your office that you want to use for a presentation at a
meeting. If the computer in the office is connected by LAN to the projector in the meeting room, the proje\
ctor can be
operated to project the image of the desktop of the computer (Windows 2000/Windows  XP) in the office and display
the PowerPoint file during the meeting. This eliminates the need for taking the computer from the office to the meeting
room.
P C C AR DLA M PS
TA TU SPO W E
RO N/
S TA N D  
B YS
O UR
CE
A U T
O  
A D J
U S
T
3 D  
R E
FO RMS
ELEC TPC C AR D
L A M P
S TA TU S
P O W E
RO N/
S TA N D  
B YS
O UR
CE
A U T
O  
A D J
U S
T
3 D  
R E
FO RM
Meeting room
Office
Disclaimer
You can use the Desktop Control Utility 1.0 to operate a computer located\
 in a separate room from the projector over
a network. This means there might be potential security risks that you may be expos\
ed to which could cause damage
by unauthorized access or illegal use. We recommend you take some measures to prevent third parties from unautho\
-
rized access to your data or information.
We share neither liability nor responsibility to any loss or damages aris\
ing from information leak or power down
without notice.
NOTE: In Windows operating system, click [Control Panel] → [Power Options] → [System Standby] → [Never]. This will discon-
nect a LAN connection when the computer goes in standby mode.
NOTE: To use the Desktop Control Utility 1.0, you need to have a USB mouse inse\
rted into the USB port of the projector. 
						

							
54
4. Convenient Features
Important:
• Your startup password will be required each timeyou start Desktop Control Utility 1.0.
• If you forget or lost your startup password, in- stall the program again.
Operations on the Computer
1. Connect the computer to the LAN and make the required settings.
2. Install Desktop Control Utility 1.0 on the computer.
• For instructions on installing and operating the software, see the User\
 Supportware 3 Users Guide (PDF) contained on User Supportware 3 CD-ROM.
3. Prepare the documents to be presented at the meeting and save them on th\
e computer.
4. Start up Desktop Control Utility 1.0.
The Startup password window appears.
Window at the first startup Window after entering your startup password
5. Input the startup password and click [OK].The [Current password] input window appears.
NOTE: The [Current password] will be changed each time you start Desktop\
 Control Utility 1.0.
6. Make a note of the password.7. Click [OK]. Desktop Control Utility 1.0 starts.
Go to the room where the projector is installed, taking the password you\
 made a note in the previous Step [6]. 
						

							
55
4. Convenient Features
Operations on the projector – Connecting to the computer
1. Make the LAN settings on the projector. Make the LAN settings at [Setup] 
→ [Installation] → [LAN Mode] in the menu.  (→ page 89)
2. Connect a commercially available USB mouse to the projector. (
→ page 38)
3. Click anywhere on the screen with the USB mouse.
The menu appears.
4. Click [Source], then click [LAN]. The help message is displayed.
The message is displayed only when a password for Desktop Control Utilit\
y 1.0 is not assigned.
5. Follow the message to press the MENU button on the projector cabinet or \
the remote control. The connections bar appears at the bottom left of the screen.
6. Click the password input icon .
7. Click [Entry].
The password input window appears.
8. Click .
The character input window appears. (
→ page 128) 
						

							
56
9. Input the password you made a note of in the previous Step 6 in “Oper\
ations on the Computer”.10. Input the password and click [OK]. The password input window is turned off.
11. Click the PC search icon 
.
The PC search window appears.
12. Click [OK]. The connection selection window appears.
• To search by inputting the IP address of the connected computer, click  on the PC Search window, click
[Input IP Address], then click [OK].
13.  Click the computer to which you want to connect, then click [OK].
The desktop of the connected computer appears.
NOTE: Once the desktop appears, the menu will no longer appear when the \
USB mouse is clicked. To display the menu while the
desktop is displayed, press the button on the projector itself or on the\
 remote control.
Operations on the projector –Operating the desktop
A USB mouse connected to the projector can be used to operate the display\
ed desktop.
If the MENU button on the projector cabinet or the remote control is pre\
ssed while the desktop is displayed, an
additional operations bar appears at the bottom left of the screen.
4. Convenient Features
 
						

							
57
The following operations are available only with buttons on the projecto\
r cabinet or the remote control. 
 Disconnect icon ................. Use to cut off communications with the computer.
  
 Shift icon ............................ Select this icon and press the ENTER button to set the shift lock mode. \
Select this icon  and
press the ENTER button again to cancel the shift lock mode.
  
 Ctrl icon ............................. Select this icon and press the ENTER button to set the control lock mode\
. Select this ic on
and press the ENTER button again to cancel the control lock mode.
  
 Esc icon ............................. Use to do the same operation as when the “Esc” button on the compu\
ter is pressed. Use it
for example to stop a PowerPoint slideshow.
Operations on the projector – Disconnecting communication
1. Press the MENU button while the desktop is displayed.
The additional operations bar appears at the bottom left of the screen.
2. Select the disconnect icon  and press the ENTER button.
The connections bar appears at the bottom left of the screen.
To reconnect the communication, click the PC search icon   and repeat steps 12 and 13 in the previous page.
NOTE: Disconnection is possible by clicking the projector icon and then Disconnect on the task bar.
Operations on the projector – Exiting the desktop operation
Exiting the desktop operation using the taskbar in Windows.
1. Click the projector icon  on the taskbar while the desktop is displayed.
The pop-up menu appears.
2. Click [Exit]. Desktop Control Utility 1.0 quits
3. Click anywhere on the screen.       The connections bar appears at the bottom left of the screen.4. Click again anywhere on the screen.
      The menu appears.5. Click [Source] and then click any other source than [LAN].
     The menu turns off.
4. Convenient Features 
						

							
58
5. Using the Viewer
 Making the Most out of the Viewer Function
Features
The Viewer feature allows you to view slides stored on a PC memory card (ref\
erred to as PC card in this manual) or
USB memory on the projector. Even if no computer is available, presentations can be conducted simpl\
y with the
projector. This feature is convenient for holding presentations at meetings and in \
offices, as well as for playing images
taken on digital cameras.
Easy to use
• Presentations can be started immediately simply by inserting a PC card o\
r USB memory (not supplied)
• Easy slide switching
• Remote control operation
• Jumping to a list of slides or any specific slide
Simple utility software (for computer)
• Ulead Photo Explorer 8.0SE Basic operable on Windows XP/Windows 2000.
• Slides can be created by capturing the currently displayed image.
• Control screen for displaying lists of slides and editing.
* Microsoft, Windows and PowerPoint are registered trademarks of Microsoft\
 Corporation.
TIP:
• To use the Viewer, first you need to create presentation materials on your PC (JPEG, BMP\
, GIF*1, PNG*1, Index*2 files).
For creating presentation materials using the Ulead Photo Explorer 8.0, see the supplied User Supportware 3 User’s Guide or O n-
line help in Ulead Photo Explorer 8.0. *
1Both PNG and GIF format support non-interlaced images only.
*2“Index” file is a file created using the Ulead Photo Explorer 8.0 \
contained on the supplied NEC User Supportware 3 CD-ROM. See the supplied “User Supportware 3 User’s Guide” for installing the Ulead Photo Explorer 8.0 on your computer\
.
NOTE:• Use commercially available USB memory devices.• The PC Card slot accepts PCMCIA Type II only.
• Some USB memory devices (brands) may not work. See our website for available USB mem\
ory devices:http://www.nec-pj.com• The projector does not support NTFS formatted flash memory card or USB memory device. Be sure to use a flash memory card or USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your flash memory card or USB memory device in your computer, refer to the document or help file that comes with
your Windows. 
						

							
59
5. Using the Viewer
 Saving data to a PC card or USB memory device
There are two ways to save your data to a PC card or USB memory device.
Using Ulead Photo Explorer 8.0
Install Ulead Photo Explorer 8.0 from the supplied User Supportware 3 CD\
-ROM to your computer. Use Ulead Photo
Explorer 8.0 to create PowerPoint files or graphic data on your computer\
 and save the files to a PC card or USB
memory device.
Files created on Ulead Photo Explorer 8.0 are index format.
For more details about Ulead Photo Explorer 8.0, see the supplied Wired\
 and Wireless Network Setup Guide, Basic
Operation Guide (PDF) on the User Supportware 3 CD-ROM and the help f\
ile of Ulead Photo Explorer 8.0.
Using Windows Explorer to save files
Supported file format for Viewer are JPEG, BMP, PNG, GIF and Index. 
						

							
60
5. Using the Viewer
 Operating the Viewer Function from the Projector (playback)
This section describes the operation for showing slides created using th\
e Viewer function with the projector. It is also
possible to make slides directly from the images projected with the proj\
ector.
Projecting slides (Viewer)
Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a PC card or
USB memory inserted into your PC.
To start the Viewer, press the SOURCE button on the cabinet to select [Viewer]. ( → page 
26)
Viewer screen will be displayed. (A slide will be displayed at the factory default.)
• You can use the VIEWER button on the remote control to select [Viewer].
Operating Viewer Menu
1. Insert a PC card into the PC card slot or USB memory into the USB port o\
f the projector.
2. Press the VIEWER button on the remote control or select the [Viewer] from the source list.
An image stored in the PC card or USB memory will be displayed.
3. Press the MENU button to display the Viewer menu.
The Viewer menu will appear when you press the MENU button on the remote cont\
rol or the projector cabinet.
The Viewer menu includes the following commands:
Play ................... Plays back automatically or manually depending on the setting in Options\
. This allows you to move on to  the
next slide when [Manual] is selected in the [Play Mode].
Stop ................... This allows you to stop Auto Play while you are playing back and to resu\
me playing from the selected sli de
or folder when [Auto] is selected in the [Play Mode].
Thumbnails ........ Displays a list of thumbnails of Graphic files stored in the PC card or USB memory inserted into the projec- tor.
Logo .................. Replace the default background logo with another logo in JPEG, BMP, non-interlaced GIF or non-interlaced PNG format.
Options .............. Displays the Viewer setting options.
4. Select [Play] and then press the ENTER button to display the first slide\
 or to start playing slides automati- cally.