Dukane Imagepro 8806 Portable Lcd Projector Users Manual

							
19
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
9Select SSID from “Site Survey ” (if necessary).
A list of SSID that can be connected to wireless LAN in this place are d\
isplayed, and the SSID that are
to be connected are selected from this list.  When SSID is selected from\
 the list, the  “SSID ” field,
“ Mode ” field and  “Channel ” field will also be automatically set.
 Press the 
SELECT    button once to highlight  “Site Survey ” and press the  button.
Searching SSID will begin.
When searching SSID is complete, a list of SSID is displayed.
Icon
............ Access point............ Personal computer (Ad Hoc)
........... WEP setting
 Use the 
SELECT  / button to highlight the SSID of the network to be connected.
Press the 
 button once to highlight [OK] and press the  button.
If the SSID to be connected is not on the list, press the 
EXIT  button.
Note
To connect SSID for which WEP is set, the same setting must be made on the projector
(
page 21).
10Input or edit  “SSID ” (if necessary).
SSID selected in  “Site Survey ” are automatically input.
If the highlight is moved to the  “SSID ” field and the 
 button is pressed, a software keyboard is
displayed and characters can be input or edited.
The default setting of the projectors is  “NECPJ ”. 
						

							
20
5. Setting the LAN Setting of Projector
11Select “Mode ” (if necessary).
The communication mode of the SSID selected in  “Site Survey ” are automatically selected.
The settings can be changed by moving the highlight to the  “Mode ” field and pressing the 
button.
• “Infrastructure ”.............. This is selected if communication is performed with two or more devices
connected by wired or wireless LAN via an access point.
• “802.11 Ad  Hoc ”............ This is selected to perform peer-to-peer communication between the
projector and a personal computer by using only wireless LAN.
Example of connection when Example of connection when
“ Mode ” is  “Infrastructure ”“ Mode” is  “802.11 Ad Hoc ”
Wired LAN
Access
point
P
C C
AR DCO M PO NEN T 
I N A
U DI
O  I
N C
O M PU TE
R  
3  I N
C O M PU TER  1  
I N
CO M PU TER  2  
I NP
C C
O NTR OLM ONIT O R 
O UT
A U DI
O  
O UT
S
-
V I
D E
O  
I N
VI
D EO  
I NA
U DIOC b
/P b
L/
M ONO R
C
r
/P
rA
C I N
P C 
C AR DLA M PSTA
TU SPO W ERO
N/S
TA N D B
YSO UR CE
AUT
O AD JUS T
3 D  RE FOR MS
ELEC TP
C C
AR DCO M PO NEN T 
I N A
U DIO  I
N C
O M P
U T
ER  
3  I N
C O M PU TER  1  
I N
CO M PU TER  
2  
I NP
C C
O NTR OLM ONIT O R 
O UT
A U DI
O  
O UT
S
-
V I
D EO  
I N
VI
D EO  
INA
U D
IOC b/P b
L/M ONO R
C
r
/P rA
C I N
P C 
C AR DLA M PSTA
TU SPO W ERO
N/S
TA N
D B
YSOU RCE
AUTO
 AD JUS T
3 D  REF ORMS
ELEC T
Example of setting 2
12Select  “Channel ” (if necessary).
Select a channel for communication using wireless LAN.
If neighboring channel numbers are used in one area, the speed of wirele\
ss LAN communication
decelerates.  To avoid such a situation, select discrete channel numbers.
The setting upon shipment is Automatic. 
						

							
21
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
13Select “WEP ” page (if necessary).
Proceed to step 17 if WEP is not set.
 Use the 
SELECT  / button to select the  “Network Type ” tab, and press the 
button to highlight the  “WEP ” tab.
The  “WEP ” page will be displayed.
14Select  “WEP ”.
Select whether WEP (encryption) is performed or not.
To perform WEP (encryption), set an encryption key.
• Disable ................... WEP (encryption) is not performed.  There is a danger that the contents of
communication are monitored.
• 64 bit ...................... 64-bit data is used as an encryption key of WEP.
• 128 bit .................... 128-bit data is used as an encryption key of WEP.
• 152 bit .................... 152-bit data is used as an encryption key of WEP.
Security is reinforced as the number of bits is increased.
15Select  “Key Select ” (only when WEP is selected).
If  “64 bit ”,  “128 bit ”, or  “152 bit ” is selected from  “WEP ”, select which of the following encryption keys,
“ Key 1 ” to  “Key 4 ”, is to be used. 
						

							
22
5. Setting the LAN Setting of Projector
16Input “Key 1 ” to  “Key 4 ”.
If  “64 bit ”,  “128 bit ”, or  “152 bit ” is selected from  “WEP ”, input an encryption key.
Set the same encryption key as the access point and personal computer to\
 be connected by the
wireless LAN.
Four types of keys can be input for WEP.
Authentic Method
64 bit
128 bit
152 bitAlphanumeric 
Character (ASCII) 5 characters
13 characters
16 charactersHexadecimal 
Number (HEX) 10 characters
26 characters
32 characters
 Use the SELECT  / button to select an item for which the encryption key is to be input an\
d
press the 
 button.
The software keyboard will be displayed.
 Use the SELECT    button, move the highlight to a character, and press the 
button.
 Repeat step  above to input the encryption key. The character will be input.
•Each button on the software keyboard has the following function.
•“
”“”................. Move the character insertion position in the encryption key field to the\
left or the right.
• “MODE ”................. Selects uppercase, lowercase, or special characters.
• “SP ”....................... Inputs space.
• “BS ”....................... Deletes one character to the left of the character insertion position in\
the encryption key field.
• [OK] ....................... Finalizes the input character and closes the software keyboard.
• [Cancel] ................. Cancels the input character and closes the software keyboard.
• “HEX ” or  “ASCII ”.... Selects alphanumeric character input or hexadecimal number input.
•When  “HEX ” is displayed, alphanumeric characters (ASCII) can
be input.
• To input hexadecimal numbers, move the highlight to  “HEX ” and
press the 
 button.   “ASCII ” will be displayed instead of
“ HEX ”, and hexadecimal numbers can be input.
• When hexadecimal numbers can be input,  “0x ” is automatically
displayed at the beginning of the input field. 
						

							
23
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
17Finalize “Advanced ”.
 Use the SELECT  / button to highlight [OK] and press the  button.
The  “PC card ” page will be displayed again.
18Reconnect the network.
 Use the SELECT  / button to highlight  “Reconnect ” and press the  button.
19Finalize the setting.
 Use the SELECT  / button to highlight [OK] and press the  button.
The contents of the setting will be stored in the memory of the projecto\
r. 
						

							
24
5. Setting the LAN Setting of Projector
5-3. Wired LAN
When connecting a LAN cable to the LAN port of the projector, configure the LAN settings in the
“Built-in ” page of  “LAN Mode ” selected from On-Screen Menu.
 Flow of setting
1
3
Step      Display Built-in page of LAN Mode.
4Step Input IP Address.
Input Subnet Mask.
Input Gateway.
2Step      Select Profiles.
5Step      Input DNS Configuration.
6Step      Reconnect the network.
7Step      Finalize the setting. Step      Enable or disable DHCP.
If Disabled (without check mark)
If Enabled (with check mark) 
						

							
25
Setting the LAN Setting of Projector
5. Setting the LAN Setting of Projector
5
Setting Wired LAN
1Display the  “Built-in ” page of  “LAN Mode ”.
Configure the setting of wired LAN in the  “Built-in ” page of  “LAN Mode ” selected from On-Screen
Menu.  If  “LAN Mode ” is not displayed, refer to  “5-1. Displaying On-Screen Menu (LAN Mode) ”
(
page 13).
2Select  “Profiles ”.
“Profile 1 ” or  “Profile 2 ” can be stored in the memory of the projector as the setting of LAN.
 Press the 
SELECT    button once to highlight the  “Profiles ” field and press the 
button.
 Use the 
SELECT  / button to highlight  “Profile 1 ” or  “Profile 2 ”, and press the  button.
3Set  “DHCP ”.
Follow the same procedure as in  “5-2. Wireless LAN ” (page 17).
4Input  “IP Address ”,  “Subnet Mask ”, and  “Gateway ”.
Follow the same procedure as in  “5-2. Wireless LAN ” (page 17,18).
5Input  “DNS Configuration ”.
Follow the same procedure as in  “5-2. Wireless LAN ” (page 18).
6Reconnect the network.
 When all the above items have been input or set, use the SELECT  / button to highlight
“ Reconnect ” and press the 
 button.
7Finalize the setting.
 Use the  button to highlight [OK] and press the  button.
The setting will be stored in the memory of the projector. 
						

							
26 6. Setting the LAN Setting of Personal Computer
6. Setting the LAN Setting of Personal Computer
([Example] Wireless LAN of Windows XP: Ad Hoc connection)
This section explains the procedure for Ad Hoc connection of wireless LAN between the personal
computer and projector, by using the wireless network setting function with Windows XP Service
Pack 2 (SP2).
Preparation:•Install a commercially available wireless LAN card driver to your person\
al computer, and
complete setup of the wireless LAN card.  For how to install the driver, refer to the User ’s
Manual of the wireless LAN card.
• Check the display of the Windows XP taskbar.  If a network connection utility dedicated to
a wireless LAN card is executed, terminate that utility.
• Make the wireless LAN setting of the projector. For details, refer to  “4. Attaching  Wireless
LAN Card ” (
page 11) and  “5. Setting the LAN Setting of Projector ” (page 13).
Shown below is an example of the wireless LAN settings for the projector\
.
[Example of settings for projector]
Contents
IP Address
Subnet Mask
SSID
Mode
WEP
Key Select
Key 1Settings
192.168.100.10
255.255.255.0
NECPJ
802.11 Ad hoc
64 bit
Key 1
NECVT
1Click Windows [Start]  → [Control Panel].
The  “Control Panel ” window will be displayed.
2Double-click the  “Network Connections ”.
• If the  “Control Panel ” window displays categories (with a blue background), click [Network a\
nd
Internet Connections], and then click [Network Connections].
The  “Network Connections ” window will be displayed. 
						

							
27
Setting the LAN Setting of Personal Computer
6. Setting the LAN Setting of Personal Computer
6
3Right-click the [Wireless Network Connection] icon and click [Property].
3-2
3-1Right-clickClick
A property window for wireless network connections will be displayed.
4From the list of [This connection uses the following Items:], select (c\
lick)
[Internet Protocol (TCP/IP)] and click [Properties].
4-2
4-1Select Click
•The property window for wireless network connections will be displayed a\
gain. 
						

							
28 6. Setting the LAN Setting of Personal Computer
5Click [Use the following IP address:], and input [IP address]and[Subnet \
mask].
•If, for example, the [IP address] and [Subnet mask] of the projector are\
 set as show in  “Example of
settings for projector ” on page 26, set the personal computer as shown below.
• Example of setting the IP address and subnet mask.
Projector (     page 26)
192.168.100.10
255.255.255.0
IP Address
Subnet Mask
Personal computer(Screen Below)
192.168.100.20
255.255.255.0
5-2
5-1Click
Input
6Click [OK].
A property window for wireless network connections will be displayed.
7Click the [Wireless Networks] tab.
8Click [Use Windows to configure my wireless network settings], display the
check mark (
) and click [OK].
8-2
8-1Click
Click
Click7