Dukane Imagepro 8806 Portable Lcd Projector Users Manual

							
81
6. Using On-Screen Menu
Using the Wall Color Correction [Wall Color]
This function allows for quick adaptive color correction in applications\
 where the screen material is not white.
The following nine options are available.
Setting Lamp Mode to Normal or Eco [Lamp Mode]
This feature enables you to select two brightness modes of the lamp: Nor\
mal and Eco modes. The lamp life can be
extended by using the Eco mode. Selecting Eco mode decreases fan noise c\
ompared to in Normal mode.
NOTE: If the projector is overheated in Normal mode, there may be a case\
 where the Lamp mode will be forced into the Eco mode t o
protect the projector. This mode is called forced Eco mode. When the projector is in forced Eco mode, the picture brightness decreases. The LAMP indicators steady green light indicates t he
lamp is in Eco mode. When the projector comes back to normal temperature, the Lamp mode retur\
ns to Normal mode.
In the forced Eco mode, changing [Lamp mode] setting in the menu will not affect t\
he actual lamp mode.
Selecting Menu Mode [Menu Mode]
This feature allows you to select two menu modes: Basic Menu and Advanced Menu.
Basic Menu ........... This is the basic menu that contains minimum essentials of menus and com\
mands.
Advanced Menu ..... This is the menu that contains all the available menus and commands.
Selecting Menu Language [Language]
You can choose one of 21 languages for on-screen instructions.
Lamp Mode Description Status of LAMP indicator
Normal Mode This is the default setting (100%  Brightness). Off
Eco Mode
Select this mode to increase the lamp
life (approx. 80% Brightness (light output) 
on NP2000 and approx. 85% Brightness 
(light output) on NP1000).Steady Green light 
						

							
82
6. Using On-Screen Menu
[Menu]
Selecting Menu Color [Color Select]
You can choose a color for the menu.
Turning On / Off Source Display, Message and Time [Display Select]
Source ................... This option turns on or off input name display such as Computer 1, Compu\
ter 2, Computer 3, Component, Video, and No Input to be displayed on the top right of the screen.
Message ................ This option turns on or off messages. Even though selecting [Off], the following message will appe\
ar. • “Projector is locked” When the projector security is unlocked, the messa\
ge will disappear.
Time ...................... This option turns on or off the current time displayed on the top left o\
f the screen.
NOTE: The source and current time will be displayed for the time specified in [Display Time]. When [Manual] is selected in [Dis play
Time], the source and current time will be always displayed.
Selecting Menu Display Time [Display Time]
This option allows you to select how long the projector waits after the \
last touch of a button to turn off the menu. The
preset choices are [Manual], [Auto 5 sec], [Auto 15 sec], and [Auto 45 s\
ec]. The [Auto 45 sec] is the factory preset.
Selecting a Color or Logo for Background [Background]
Use this feature to display a blue/black screen or logo when no signal i\
s available. The default background is blue. You
can change the logo screen using the Viewer feature. (→ page 
64)
[Security]
Disabling the Cabinet Buttons [Control Panel Lock]
This option turns on or off the Control Panel Lock function.
NOTE:
• This Control Panel Lock does not affect the remote control functions.
• When the control panel is locked, pressing and holding the EXIT button o\
n the projector cabinet for about 10 seconds will chan ge
the setting to [Off]. 
						

							
83
6. Using On-Screen Menu
Setting a Password [Menu Lock] / [Logo Lock]
A password can be set for your projector to avoid operation by an unautho\
rized person.
When [Menu Lock] is set, changing the menu from Basic to Advanced will display the Password input screen.
When [Logo Lock] is set, doing any one of the following two operations w\
ill display the Password input screen.
• Changing the background from or to [Logo]
• Changing the logo data in a PC card or USB memory.
[Entry]
To assign your password:
NOTE: Up to 15 alphanumeric characters can be assigned.
1. Type a password. Select [On] and press the ENTER button.
The [Enter the Password] screen will be displayed.
Make sure that  is highlighted and then press the ENTER button.
The Software keyboard appears. Use the Software keyboard to type a passw\
ord and then highlight [OK] on the [Enter the Password] screen and press the ENTER button.
The [Confirm Password] screen will be displayed.
2. Type the same password again. Highlight [OK] on the [Enter the Password] \
screen and press the ENTER button.
Your password will be assigned.
[Delete]
To delete your password:
1. Select [Off] and press the ENTER button. The [Current Password] screen will be dis\
played.
2. Use the Software keyboard to type your password. Highlight [OK] on the [\
Current Password] screen and then press the ENTER button.
Your password will be deleted. 
						

							
84
6. Using On-Screen Menu
[Security]
The Security function enables you to protect your projector so that the \
projector will not project a signal unless you
enter a keyword. There is also an option to lock the projector by using a registered PC c\
ard* or USB memory* as a
protect key. Once you have registered your PC card as a protect key, you are required to insert the registered PC card
into the PC card slot of the projector each time you turn on the project\
or. You can enable the Security function by using
a keyword only.
* The projector does not support NTFS formatted flash memory card or USB m\
emory device. Be sure to use a flash memory card or USB memory device formatted with t\
he FAT32, FAT16 or FAT file system.
To format your flash memory card or USB memory device in your computer, refer to the document or help file that
comes with your Windows.
On/Off .................... This turns the Security function on or off.
Keyword ................ Enter an appropriate keyword when you use the Security function. (Up to\
 10 characters can be used.) The Security function is available only when your keyword is entered.
Use Protect key ..... Check this box to lock your projector when using a PC card. To use a keyword without a PC card, do not check this box.
Drive ...................... Switches between PC Card slot and USB port (type A).
Read ...................... Reads data from a PC card.
Register ................. Registers data from the PC card. The Security function is not available \
unless at least one PC card is registered. (if the [Use Protect key] check box is selected) Up to 5 P\
C cards can be registered.
Delete .................... Deletes data of a registered PC card.
To set up a keyword to enable the Security function without using a regis\
tered PC card.
1. Use the SELECT  or  button to select [Keyword] and use the software keyboard to enter a key\
word.
NOTE: Please make a note of your keyword.
2. Use the SELECT 
 or  button to select [Off] and then use the SELECT  or  to select [On].
3. Use the SELECT 
 or  button to select [OK] , then press the ENTER button.
The [Are you sure?] message will appear.
4. Use the SELECT 
 or  button to select [Yes] and press the ENTER button.
The Security function takes effect. 
						

							
85
6. Using On-Screen Menu
To register a PC card or USB memory device as a protect key.
Preparation:  Insert the PC card into the PC card slot of the projector or insert the\
 USB memory device into the USB
port (type A) of the projector.
1. Use the SELECT  or  button to select [Use Protect Key] and press the ENTER button.
2. Use the SELECT 
 or  button to select [Read] and press the ENTER button.
Data of the PC card will be read into the projector.
3. Use the SELECT 
 or  button to select [Register] and press the ENTER button.
Downloaded data will be registered and be displayed in the list window.
4. Use the SELECT 
 or  button to select [Keyword] and use the software keyboard to enter a key\
word.
NOTE: Please make a note of your keyword.
5. Use the SELECT 
 or  button to select [Off] and then use the SELECT  or  to select [On].
6. Use the SELECT 
 or  button to select [OK] , then press the ENTER button.
The [Are you sure?] message will appear.
7. Use the SELECT 
 or  button to select [Yes] and press the ENTER button.
The Security function takes effect.
To turn on the projector when Security is enabled (when using your keywo\
rd only).
1. Press and hold the POWER button for a minimum of two seconds. The projector will be turned on and display a message to the effect that the projector is security-protected.
2. Press the MENU button. The Release Code input screen will be displayed.
3. Enter your keyword in the Release Code input screen.
You can view the projected image.
NOTE: Do not forget your keyword. However, if you forget your keyword, Dukane   or your dealer will  provide  you with your Release
Code. See more information at the end of this section.
To turn on the projector when Security is enabled (when using PC card or\
 USB memory device as
a protect key).
Preparation:  Insert the registered PC card into the PC card slot of the projector or \
insert the registered USB memory
device into the USB port (type A) of the projector.
Press and hold the POWER button for a minimum of two seconds.
The projector will turn on and then recognize the PC card or USB memory \
device. Once the image has been pro-
jected, it will stay on without the PC card or USB memory device.
• The projector does not support NTFS formatted PC card or USB memory devi\
ce.
Be sure to use a PC card or USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your PC card or USB memory device in your computer, refer to the document or help file that comes
with your Windows.
• When the projector is turned on, if the registered PC card or USB memory\
 device is not inserted into the projector, no signal will be displayed with a message to the effect that the proj\
ector is security-protected. To turn
off the security protection, insert the registered PC card or USB memory\
 device into the projector. 
						

							
86
6. Using On-Screen Menu
• The security disable mode is maintained until the main power is turned o\
ff (by setting the main power switch toO or unplugging the power cord). In the following cases you will be a\
sked to check the protect key or input the
keyword:
(1)When [OK] is selected at an image for which security is set and the powe\
r is turned off then back on
(2)When the main power is turned off then back on while the security functi\
on is enabled
(3)When you attempt to display an image for which security is set while the\
 security function is enabled
• Blanks (spaces) cannot be used in the Keyword section.
To delete PC card data you registered.
1. Use the SELECT  or  button to select [Delete] and use the SELECT  button to select the list window.
2. Use the SELECT 
 or  button to select the information on the PC card or USB memory device yo\
u wish to
delete.
3. Press the SELECT 
 button to select [Delete] and press the ENTER button.
The information on the PC card or USB memory device will be deleted.
If youve lost your registered PC card, proceed as follows:
1. Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and display a message to the effect that the projector is security-protected.
2. Press the MENU button.
The Release Code input screen will be displayed as well as your Request \
Code (24 alphanumeric charac-ters).
NOTE: Y our dealer will provide you with your Release Code in exchange for your \
registered keyword and Request Code. See
more information at the end of this section.
3. Enter your Release Code in the Release Code Input screen. The security protection will be turned off.
NOTE:• Some brands of PC cards or USB memory devices cannot be used as a protect key.• You should register one or more PC cards or USB memory devices in case your registered PC card or USB memory device is damaged or stolen. Up to 5 pieces can be registered.
• Once the registered PC card or USB memory device has been formatted, the PC card or USB memory device cannot be recognized
as your registered protect key.
The Security will not be disabled by using [Reset].
NOTE: For additional information visit:US : http://www.
dukcorp.com/av

Europe : http://www
.nec-europe.com/
Global : http://www.nec-pj.com/
Using PJLink
This option allows you to set a password when you use the PJLink feature\
.
On/Off: Enable or disable the password.
Password: Enter a password (up to 32 characters) 
						

							
87
6. Using On-Screen Menu
[Installation]
Selecting Projector Orientation [Orientation]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
Desktop front Ceiling rear
Desktop rear Ceiling front
NOTE: What is PJLink?
PJLink is a standardization of protocol used for controlling projectors \
of different manufacturers. This standard protocol is
established by Japan Business Machine and Information System Industries \
Association (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
Setting of PJLink will not be affected even when [Reset] is done from the menu. 
						

							
88
Selecting Aspect Ratio and Position for Screen [Screen]
Screen Type ........... Select one of two options: 4:3 Screen or 16:9 Screen for the screen to b\
e used. See also [Aspect Ratio].(→  page 
77)
Position ................. This feature allows you to adjust the vertical position of the image whe\
n 16:9 has been selected for t he
screen type.
When 16:9 has been selected there is black area above and below the imag\
e.
NOTE: This option is available only when [16:9] is selected in [Screen T\
ype].
NOTE:
• After changing the screen type, check the setting of [Aspect Ratio] in t\
he menu. (
→page 77)
• [Position] is not available when [4:3] is selected for [Screen Type] or when [Letter Box] is selected for [Aspect Ratio]. • During [Keystone] or [Cornerstone] adjustment, [Screen Type] or [Position] is not available. To make available, first reset th e
adjustments for [Keystone] or [Cornerstone] and then make settings for [Screen Type] or [Position]. Finally make adjustments fo r
[Keystone] or [Cornerstone] again. Changing [Screen Type] or [Position] may limit [Keystone] or [Cornerstone] in its adjustab\
le
range.
6. Using On-Screen Menu 
						

							
89
6. Using On-Screen Menu
[LAN Mode]
Setting LAN Mode
This feature allows you to set various setting items when the projector \
is used on your network.
CAUTION
• Consult with your network administrator about these settings.
• Connect a LAN cable (Eathernet cable) to the LAN port (RJ-45). (→ page 
19)
• For wireless LAN connection, use the NEC optional wireless LAN card (NW\
L-100*). * Last digit of the model code varies depending on which country you live \
in. For more information, visit ourWebsite.
• To use wireless LAN, insert the NEC optional wireless LAN card (NWL-100*\
) into the PC Card slot.
(→  Inserting and Removing a PC Card” on page 
21)
Hints on How to Set Up LAN Connection
To configure the projector to communicate on the network using the LAN po\
rt (RJ-45) or the optional wireless LAN
card:
1. Select the [Built-in] tab for the LAN port (RJ-45) or the [PC Card] ta\
b for the optional wireless LAN card. 2. On the [Built-in] tab or the [PC Card] tab, select a number from the [Pr\
ofiles] list for your LAN settings.
Two settings can be stored in memory for each the LAN port and the wirele\
ss LAN card respectively.
3. On the [Built-in] tab or the [PC Card] tab, turn on or off [DHCP], specify IP address, Subnet Mask, Gateway and DNS Configuration. Select [OK] and press the ENTER button.
(
→ page 90, 91)
To recall the settings from memory:
After selecting the [Built-in] tab or the [PC Card] tab, select the numb\
er from the [Profiles] list.
Select [OK] and press the ENTER button. ( → page 
90, 91)
To connect a DHCP server:
On the [Built-in] tab or the [PC Card] tab, select [DHCP] and press the \
ENTER button. A check mark will be placed.
Select again and press the ENTER button. The check box will be cleared.
When setting an IP address without using a DHCP server, clear the check box for [DHCP]. ( → page 
90, 91)
To set only for wireless LAN (Network Type and WEP):
1. On the [PC Card] tab, select [Profiles] and then select [Profile 1] or [\
Profile 2]. 2. On the [PC Card] tab, select [Advanced] and press the ENTER button. The \
[Advanced] menu will be displayed.
(
→ page 92, 93)
To select a wireless LAN access point:
1. On the [PC Card] tab, select [Profiles] and then select [Profile 1] or [\
Profile 2].2. On the [PC Card] tab, select [Advanced] and press the ENTER button.3. On the Advanced menu, select [Network Type] 
→ [Site Survey] and press the ENTER button.
4. Select [Mode] and then select [Infrastructure]. (
→ page 92) 
						

							
90
6. Using On-Screen Menu
To receive error messages or information on the remaining lamp life via e\
-mail:
1. On the [Mail] tab, select [Alert Mail] and press the ENTER button. A check mark will be placed.2. Set [Senders Address], [SMTP Server Name] and [Recipients Address]. Select [OK] and press the ENTER button.
(
→ page 95)
To execute [Easy Connection] using Image Express Utility 2.0:
The [Easy Connection] is a mode that can abbreviate the troublesome LAN \
settings when using the Image Ex-
press Utility 2.0 and connecting the PC and projector via a wireless LAN\
.
The Image Express Utility 2.0 is contained on the supplied User Supportw\
are 3 CD-ROM. To use [Easy Connec-
tion], select [PC Card]  → [Profiles]  → [Easy Connection]. ( → page 
91)
[Built-in]
Profiles (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of\
 the projector.
Select [Profile 1] or [Profile 2] and then do settings for [DHCP] and th\
e other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
DHCP:
Enabling this option automatically assigns an IP address to the projector from your DHCP server.
Disabling this option allows you to register the IP address or subnet mask number obtained from your network
administrator.
IP Address ............. Set your IP address. Press 
 to display the software keyboard and type in 12 numeric characters.
Subnet  Mask ......... Set your subnet mask number. Press 
 to display the software keyboard and type in 12 numeric characters.
Gateway ................ Set the default gateway of the network connected to the projector. Press 
 to display the software keyboard
and type in 12 numeric characters.
DNS Configuration Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters are used.
Reconnect ............. Use this button to connect the projector to a network.