Digitus Router DN 7049 1 User Manual

							42 
 
 
Please click ‘Continue’ (1) to back to previous setup m e n u ; to continue on 
router setup, or click ‘Apply’ to reboot the router so the settings will take 
effect (Please wait for about 30 seconds while router is rebooting). 
 
 
2-5-2 Setup procedure for ‘S t a t i c   I P’: 
 
 
 
Here are descriptions of every setup items: 
 
IP address assigned  Please input IP address assigned 
by your Service    by your service provider. 
Provider (1):  
 
Subnet Mask (2):  Please input subnet mask assigned by your 
s e r v i c e   p ro v i d e r   
 
Service Provider   Please input the IP address of DNS 
Gateway Address (3):  server provided by your service provider. 
 
After you finish with all settings, please click ‘Apply’ (4) button and the 
following message will be displayed on your web browser: 
1 
2 
3 
4  
						

							43 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-3 Setup procedure for ‘PPPoE’: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):  Please input user name assigned by your Internet 
s e r v i c e   p ro v i d e r   h e re . 
 
1 
2 
4 
3 
5 
6 
7  
						

							44 
Password (2):  Please input the password assigned by your Internet 
s e r v i c e   p ro v i d e r   h e re . 
Service Name (3):  Please give a name to this Internet service, this is 
optional 
 
MTU (4):  Please input the MTU value of your network 
connection here. If you don’t know, you can use 
default value. 
 
Connection    Please select the connection type of Internet 
Type (5):  connection you wish to use. 
Continuous – The connection will be kept always on. If 
the connection is interrupted, the router will re-connect 
automatically. 
 
Connect On-Demand – Only connect when you want to 
surf the Internet. “Idle Time Out” i s   s e t   t o   s t o p   t h e  
connection when the network traffic is not sending or 
receiving after an idle time. 
 
Manual – After you have selected this option, you will 
see the “Connect” button and “Disconnect” button, 
click “’Connect” and the router will connect to the ISP. 
If you want to stop the connection, please click 
“D i s c o n n e c t” button. 
 
I d l e   Time Out (6):  If you have selected the connection type to 
“Connect-O n-Demand”, please input the idle time 
out. 
 
After you finish with all settings, please click ‘Apply’ (7) button and the 
following message will be displayed on your web browser: 
  
						

							45 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-4 Setup procedure for ‘PPTP’: 
 
PPTP requires two kinds of setting: WAN interface setting (setup IP 
address) and PPTP setting (PPTP user name and password). Here we start 
from WAN interface setting: 
 
 
 
Select the type of how you obtain IP address from your service provider 
here. You can choose ‘Obtain an IP address automatically’ (equal to 
DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the 
following IP address’ (i.e. static IP address) 
 
WAN interface settings must be correctly set, or the Internet connection 
will fail even those settings of PPTP settings are correct. Please contact  
						

							46 
your Internet service provider if you don’t know what you should fill in 
these fields. 
 
Now please go to PPTP settings section: 
 
 
 
Here are descriptions of every setup items: 
 
User N a m e (1):  Please input user ID (user name) assigned by your 
I n t e r n e t   s e r v i c e   p ro v i d e r   h e re . 
 
Password (2):  Please input the password assigned by your Internet 
s e r v i c e   p ro v i d e r   h e re . 
 
PPTP Gateway (3):  Please input the IP address of PPTP gateway 
assigned by y o u r   I n t e r n e t   s e r v i c e   p ro v i d e r   h e re . 
 
Connection ID (4):  Please input the connection ID here, this is optional 
and you can leave it blank. 
 
MTU (5):  Please input the MTU value of your network 
connection here. If you don’t know, you can use 
default value. 
 
BEZEQ-ISRAEL (6): If you are connecting to the BEZEQ network in 
Israel. Please enable this function. 
 
1 
2 
3 
4 
5 
7 
8 
9 
6  
						

							47 
Connection    Please select the connection type of Internet 
type (7) :   connection you wish to use, please refer to section 
2-5-3 for detailed descriptions. 
 
Idle Time Out (8):  Please input the idle time out of Internet connection 
you wish to use, and refer to section 2-5-3 for 
detailed descriptions. 
 
When you finish with all settings, please click ‘Apply’ (9) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-5 Setup procedure for ‘L2TP’: 
 
 
1 
2 
4 
3 
5 
7 
6  
						

							48 
 
Here are descriptions of every setup items: 
 
User ID (1):  Please input user ID (user name) assigned by your 
I n t e r n e t   s e r v i c e   p ro v i d e r   h e re . 
 
Password (2):  Please input the password assigned by your Internet 
s e r v i c e   p ro v i d e r   h e re . 
 
L2TP   Please input the IP address of PPTP gateway  
Gateway (3):  assigned by your Internet service provider here. 
 
MTU (4):  Please input the MTU value of your network connection 
here. If you don’t know, you can use default value. 
 
Connection  Please select the connection type of Internet connection 
type (5):  you wish to use, please refer to section 2-5-3 for detailed 
descriptions. 
 
Idle Time   Please input the idle time out of Internet connection 
Out (6):  you wish to use, and refer to section 2-5-3 for detailed 
descriptions. 
 
When you finish with all settings, please click ‘Apply’ (7) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
  
						

							49 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-6 Setup procedure for ‘Telstra Big Pond’: 
 
 
 
This setting only works when you’re using Telstra big pond’s networ k  
service in Australia. You need to input: 
 
User Name (1):   Please input the user name assigned by Telstra. 
 
Password (2):   Please input the password assigned by Telstra. 
 
Assign login     Check this box to choose login server by yourself. 
server manually (3):  
 
Server I P   A d d r e s s (4):Please input the IP address of login server here. 
 
When you finish with all settings, click ‘Apply’ (5) button and the 
following message will be displayed on your web browser: 
 
1 
2 
3 
4 
5  
						

							50 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-7 Setup procedure for ‘DNS’: 
 
If you select ‘Dynamic IP’ or ‘PPPoE’ as Internet connection method, at 
least one DNS server’s IP address should be assigned automatically. 
However, if you have preferred DNS server, or your service provider 
didn’t assign the IP address of DNS server because of any reason, you can 
input the IP address of DNS server here. 
 
 
 
 
 
1 
2 
3  
						

							51 
Here are descriptions of every setup items: 
 
DNS Address (1):  Please input the IP address of DNS server provided 
by your service provider. 
 
Secondary    Please input the IP address of another DNS 
DNS Address (2):  server provided by your service provider, this is 
optional. 
 
 
 
 
 
 
 
After you finish with all settings, please click ‘Apply’ (3) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
 
 
 
 
NOTE: Only IP address can be entered here; DO NOT use the hostname 
of DNS server! (i.e. only numeric characters and dots are accepted) 
 
10.20.30.40…………………………………………………………\
…… Correct 
dns.serviceprovider.com…………………………………………... Incorrect