Digitus Router DN 7049 1 User Manual

72 
C T S   P r o t e c t (10):  Enabling this setting will reduce the chance of radio 
signal collisions between 802.11b and 802.11g/n 
wireless access points. It’s recommended to set this 
option to ‘Auto’ or ‘Always’. However, if you set to 
‘None’, your wireless router should be able to work 
fine, too. 
 
T x   P o w e r ( 1 1 ):  You can set the output power of w i r eless radio. 
U n l e s s   y o u’re using this wireless router in a really 
big space, you may not have to set output power to...

73 
2-7-3 Wireless Security 
 
It’s very im portant to set wireless security settings properly! If you don’t, 
hackers and malicious users can reach your network and valuable data 
without your consent and this will cause serious security problem. 
 
To set wireless security settings, Please click ‘Wireless’ menu on the left 
of web management interface, then click ‘Security Settings’, then follow 
the following instructions to set wireless security settings: 
 
Please select an encryption method from...

74 
Here are descriptions of every setup items: 
 
Key Length (2):  T h e r e   a r e   t w o  types of WEP key length: 64-bit and 
128-bit. Using ‘128-bit’ is safer than ’64-bit’, but 
will reduce some data transfer performance. 
 
Key Format (3):  There are two types of key format: ASCII and Hex. 
When you select a key format, the number of 
characters of key will be displayed. For example, if 
y o u   s e l e c t  ’64-bit’ as key length, and ‘H e x’ as key 
format, you’ll see the message at the right...

75 
 
 
 
RADIUS Server   Please input the IP address of radius  
IP address (11):   server here 
 
RADIUS Server   Please input the port number of radius 
Port (12):    server here. 
 
RADIUS Server   Please input the port number of radius 
Password (13):   password here. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After you finish WEP setting, please click ‘Apply’ button (10) and the 
following message will be displayed on your web browser: 
 
1 1 
12 
13 
TIPS: Some examples of WEP key  
(Don’t use those...

76 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
 
2-7-3-3   W i-Fi Protected Access (WPA): 
 
When you select this mode, the wireless router will use WPA encryption, 
and the following setup menu will be shown on your web browser: 
 
 
 
Here are descriptions of every setup items: 
 
W PA Unicast   Please select a...

77 
After you finish WPA Pre-shared key setting, please click ‘Apply’ button 
(5) and the following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
 
 
 
 
 
2-7-3-4 W PA   R A D I U S : 
 
If you have a RADIUS server, this router can work with it and provide 
safer...

78 
 
RADIUS Server   Please input the IP address of your 
IP address (3):   Radius authentication server here. 
 
RADIUS Server   Please input the port number of your 
Port (4):  Radius authentication s e r v e r   h e re .  Default setting is 
1812. 
 
RADIUS Server   Please input the password of your Radius 
Password (5):  authentication server here. 
 
After you finish with all settings, please click ‘Apply’ (6) button and the 
following message will be displayed on your web browser: 
 
 
 
Please...

79 
web browser: 
 
 
 
All allowed MAC addresses will be displayed in ‘MAC Address Filtering 
T a b l e’ (1). Here are descriptions of every setup items: 
 
Delete Selected (2):  If you want to delete a specific MAC address entry, 
check the ‘select’ box of the MAC address you want 
to delete, then click ‘Delete Selected’ button. (You 
can select more than one MAC addresses). 
 
Delete All (3):  If you want to delete all MAC addresses listed here, 
p l e a s e   c l i c k  ‘Delete All’ button. 
 
Enable...

80 
Comment (6):   You can input any text here as the comment of this  
  MAC address, like ‘ROOM 2A Computer’ or   
  anything. You can input up to 16 alphanumerical  
ch a r a c t e r s   h e re .  This is optional and you can leave  
it blank, however, it’s recommended to use this field  
to write a comment for every MAC addresses as a  
memory aid. 
 
Add (7):  Click ‘Add’ button to add the MAC address and 
associated comment to the MAC address filtering 
table. 
 
C l e a r   (8):  Click ‘C l ear’...

81 
2-7-5   W i-Fi Protected Setup (WPS) 
 
W i-Fi Protected Setup (WPS) is the simplest way to build connection 
between wireless network clients and this wireless router. You don’t have 
to select encryption mode and input a long encryption passphrase every 
t i m e when you need to setup a wireless client, you only have to press a 
button on wireless client and this wireless router, and the WPS will do the 
rest for you. 
 
This wireless router supports two types of WPS: Push-Button 
C onfiguration...