Digitus Router DN 7049 1 User Manual

112 
activated. 
 
After you finish with all settings, please click ‘Apply’ (e) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button....

113 
 
 
Here are descriptions of every setup items: 
 
Enable DMZ (1):  Check this box to enable DMZ function, uncheck 
this box to disable DMZ function. 
 
Public IP    You can s e l e c t  ‘Dynamic IP’ or ‘Static IP’ h e r e . 
address ( 2 ):  If you select ‘Dynamic IP’, you have to select an 
Internet connection session from dropdown menu; if 
y o u   s e l e c t  ‘Static IP’, please input the IP address 
that you want to map to a specific private IP 
address. 
 
Client PC IP   Please input the...

114 
 
 
C u r r e n t     All existing public IP address and private IP 
DMZ Table (7):  address mapping will be displayed here. 
 
Delete (8):   If you want to delete a specific DMZ entry, check 
  the ‘s e l e c t’ box of the DMZ entry you want to delete, 
t h e n   c l i c k  ‘Delete Selected’ button. (You can select 
more than one DMZ entries). 
 
Delete All (9):  If you want to delete all DMZ entries listed here, 
p l e a s e   c l i c k  ‘Delete All’ button. 
 
Reset (10):  You can also click ‘R e...

115 
3-4 System Status 
 
The functions described here will provide you with system related 
information. To enter system status menu, please either click ‘Status’ link 
located at the upper-right corner of web management interface, or click 
‘Status’ button in main menu. 
 
3-4-1 System information and firmware version 
 
You can use this function to know the system information and firmware 
version of this router. 
 
Please click ‘Status’ link located at the upper-right corner of web 
management...

116 
3-4-2 Internet Connection Status 
 
You can use this function to know the status of current Internet 
connection. 
 
Please click ‘Internet Connection’ menu on the left of web management 
interface, and the following message will be displayed on your web 
browser: 
 
 
 
This information will vary depending on the connection status. 
 
 
3-4-3 Device Status 
 
You can use this function to know the status of your router. 
 
Please click ‘Device Status’ menu on the left of web management 
interface,...

117 
 
 
This information will vary depending on the device status. 
 
 
3-4-4 S y s t e m   L o g 
 
All important system events are logged. You can use this function to 
check the event log of your router. 
 
Please click ‘S y s t e m   L o g’ menu on the left of web management interface, 
and the following message will be displayed on your web browser: 
 
 
 
 
 
 
 
1 2 3  

118 
The system events will be displayed in this page, and here are 
descriptions of every buttons: 
 
Save (1):    Save current event log to a text file. 
 
Clear (2):    Delete all event logs displayed here. 
 
Refresh (3):   Refresh the event log display. 
 
 
3-4-5 Security Log 
 
All information about network and system security is kept here, and you 
can use this function to check the security event log of your router. 
 
Please click ‘Security Log’ menu on the left of web management interface,...

119 
3-4-5 Active DHCP client list 
 
I f   y o u’re using the DHCP server function of this router, you can use this 
function to check all active DHCP leases issued by this router. 
 
Please click ‘Active DHCP client’ menu on the left of web management 
interface, and the following message will be displayed on your web 
browser: 
 
 
 
All information about active DHCP leases issued by this router will be 
displayed here. You can click ‘Refresh’ button to display latest 
information. 
 
 
3-4-6...

120 
3-5 Configuration Backup and Restore 
 
You can backup all configurations of this router to a file, so you can make 
several copied of router configuration for security reason. 
 
To backup or restore router configuration, please follow the following 
instructions: 
 
Please click ‘Tool’ located at the upper-right corner of web management 
interface, then click ‘Configuration Tools’ on the left of web management 
interface, then the following message will be displayed on your web 
browser:...

121 
3-6 Firmware Upgrade 
 
The system software used by this router is called as ‘firmware’, just like 
any applications on your computer, when you replace the old application 
with a new one; your computer will be equipped with new function. You 
can also use this firmware upgrade function to add new functions to your 
router, even fix the bugs of this router. 
 
To upgrade firmware, please follow the following instructions: 
 
Please click ‘Tool’ located at the upper-right corner of web management...