Digitus Router DN 7049 1 User Manual

92 
 
Here are descriptions of every setup items: 
 
Enable Port   Check this box to enable port mapping, 
Forwarding (1):  and uncheck this box to disable port mapping. 
 
Private IP (2):  Input the IP address of the computer on local 
network which provides internet service. 
 
Computer Name (3): Pull down the menu and all the computers 
connected to the router will be listed here. You can 
easily to select the computer name without checking 
the IP address of the computer. 
 
T y p e (4):  Select the...

93 
Delete All (11) :    Delete all mappings existed in virtual server table. 
 
Reset (12):    Unselect all mappings. 
 
After you finish with all settings, please click ‘Apply’ (13) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want...

94 
 
 
Here are descriptions of every setup items: 
 
Enable Virtual   Check this box to enable virtual server, 
Server (1):    and uncheck this box to disable virtual server. 
 
Private IP (2):   Input the IP address of the computer which 
     p ro v i d e s   I n t e r n e t   s e r v i c e . 
 
Computer Name (3): Pull down the menu and all the computers 
connected to the router will be listed here. You can 
easily to select the computer name without checking 
the IP address of the computer....

95 
Reset (9):   Remove all inputted values. 
 
Virtual Server   All existing virtual server mappings will be 
T a b l e   (10) :     displayed here. 
 
Delete (11):   Please select a virtual server mapping by clicking 
  the ‘S e l e c t’ box of the mapping, then click ‘Delete 
Selected’ button to remove the mapping. If there’s   n o  
existing mapping, this button will be grayed out. 
 
Delete All (12):   Delete all mappings existed in virtual server table. 
 
Reset (13):    Unselect all mappings....

96 
3-2-4 Port Mapping for Special Applications 
 
Some applications require more than one connection a time; these 
applications won’t work with simple NAT rules. In order to make these 
applications work, you can use this function to let these applications 
work. 
 
 
 
Here are descriptions of every setup items: 
 
Enable (1): Check this box to enable s p e c i a l applications and 
uncheck this box to disable virtual server. 
 
I P   A d d r e s s (2):  Input the IP address of the computer which you...

97 
Popula Applications This section lists the more popular applications that 
(7):     r e quire multiple connections. Select an application   
from the Popular Applications selection and click 
‘Add’ to save the setting to ‘Current Trigger-Port 
T a b l e .’ 
 
Add (8):    Add the setting to the ‘Current Trigger-Port Table.’ 
 
Reset (9): Click ‘Reset’ w i ll clear all above setting and you 
can set up again. 
 
Current Trigger-Port All the settings for the special applications will be  
(10):  listed...

98 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while the router 
is rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
3-2-5 UPnP Setting 
 
This function enables network auto-configuration for peer-to-p e e r  
communications, with this function, network devices...

99 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
 
 
 
 
 
 
3-2-6 ALG Settings 
 
Application Layer Gateway (ALG) is a special function of this router. It 
includes many preset routing rules for...

100 
 
 
There are many applications listed here. Please check the box of the 
special support for applications you need, and then click ‘Apply’ button 
and the following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page...

101 
3-3 Firewall 
 
Excepting NAT, this router also provides firewall function to block 
malicious intruders from accessing your computers on local network. 
These functions include inbound attack prevention, and block outbound 
traffics, like block URLs which have pre-defined keywords. 
 
Please follow the following instructions to enable or disable firewall 
function: 
 
Please click ‘Firewall’ menu on the left of web management interface, 
and the following message will be displayed on your web...