Digitus Router DN 7049 1 User Manual

52 
2-5-8 Setup procedure for ‘DDNS’: 
 
DDNS (Dynamic DNS) is an I P-to-Hostname mapping service for those 
I n t e rnet users who don’t have a static (fixed) IP address. It will be a 
problem when such user wants to provide services to other users on 
Internet, because their IP address will vary every time when connected to 
Internet, and other user will not be able to know the IP address they’re 
using at a certain time. 
 
This router supports DDNS service of several service providers, for 
example:...

53 
s e r v i c e   p ro v i d e r. 
 
Account /    Input account or email of DDNS registration. 
E-Mail (4):  
 
Password / Key (5):  Input DDNS service password or key. 
 
After you finish with all settings, please click ‘Apply’ (6) button and the 
following message will be displayed on your web browser: 
 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about...

54 
2-6 Wired LAN Configurations 
 
Before all computers using wired Ethernet connection (i.e. those 
computers connect to this router’s LAN port 1 to 4 by Ethernet cable) can 
communicate with each other and access internet, they must have a valid 
IP address. 
 
There are two ways to assign IP addresses to computers: static IP address 
(set the IP address for every computer manually), and dynamic IP address 
(IP address of computers will be assigned by router automatically. It’s 
recommended for most...

55 
Please follow the following instructions to set wired LAN parameters: 
 
Please click ‘L A N’ menu on the left of web management interface, there 
are three setup groups here: ‘LAN IP’, ‘DHCP Server’, and ‘Static DHCP 
Leases Table’. Here are setup instructions for each of them: 
 
 
2-6-1 LAN IP s e c t i o n: 
 
 
 
Here are descriptions of every setup items: 
 
IP address (1):   Please input the IP address of this router. 
 
Subnet Mask (2):  Please input subnet mask for this network. 
 
802.1d...

56 
2-6-2 D H C P  S e r v e r : 
 
 
 
These settings are only available when ‘DHCP Server’ in ‘LAN IP’ 
section is ‘Enabled’, and here are descriptions of every setup items: 
 
Lease Time (1):  Please choose a lease time (the duration that every 
computer can keep a specific IP address) of every 
IP address assigned by this router from dropdown 
menu. 
 
Start IP (2):   Please input the start IP address of the IP range. 
 
End IP (3):    Please input the end IP address of the IP range. 
 
Domain Name...

57 
2-6-3 Static DHCP Leases Table: 
 
This function allows you to assign a static IP address to a specific 
computer forever, so you don’t have to set the IP address for a 
computer, and still enjoy the benefit of using DHCP server. M a x i m u m  
16 static IP addresses can be assigned here. 
 
(If you set ‘Lease Time’ to ‘forever’ in ‘DHCP Server’ section, you can 
also assign an IP address to a specific computer permanently, however, 
you will not be able to assign a certain IP address to a specific...

58 
If you want to remove all characters you just entered, click ‘Clear’. 
 
 
After you clicked ‘Add’, the MAC address and IP address mapping 
will be added to ‘Static DHCP Leases Table’ section. 
 
 
 
If you want to delete a specific item, please check the ‘Select’ box of a 
MAC address and IP address mapping (1), then click ‘Delete Selected’ 
button (2); if you want to delete all mappings, click ‘Delete All’ (3). If 
you want to deselect all mappings, click ‘Reset (4). 
 
After you finish all LAN...

59 
2-7 Wireless LAN ConfigurationConfigurations 
 
If your computer, PDA, game console, or other network devices which 
is equipped with wireless network interface, you can use the wireless 
function of this router to let them connect to Internet and share 
resources with other computers with wired-LAN connection. You can 
also use the built-in security functions to protect your network from 
being intruded by malicious intruders. 
 
Please follow the following instructions to set wireless parameters:...

60 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
 
2-7-1 Basic Wireless Settings 
 
Please click ‘Wireless’ menu on the left of web management interface, 
then click ‘Basic Settings’, and the following message will be displayed 
on your web browser: 
 
 
 
This wireless router can be work in 6 modes:  
 
a. Access...

61 
 
c. AP Bridge-Point to Point: Connect this router with another wireless 
router, to expand the scope of network.  
 
d. AP Bridge-Point to Multi-Point: Connect this router with up to four 
other wireless routers, to expand the scope of network. 
 
e. AP Bridge-W D S: Connect this router with up to four WDS-c a p a b l e  
wireless routers, to expand the scope of network. 
 
f. Universal Repeater: The router can act as Station and AP at the same 
time. It can use Station function to connect to a Root...