Digitus Router DN 7049 1 User Manual

42 
 
 
Please click ‘Continue’ (1) to back to previous setup m e n u ; to continue on 
router setup, or click ‘Apply’ to reboot the router so the settings will take 
effect (Please wait for about 30 seconds while router is rebooting). 
 
 
2-5-2 Setup procedure for ‘S t a t i c   I P’: 
 
 
 
Here are descriptions of every setup items: 
 
IP address assigned  Please input IP address assigned 
by your Service    by your service provider. 
Provider (1):  
 
Subnet Mask (2):  Please input subnet mask...

43 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-3 Setup procedure for ‘PPPoE’: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):  Please input user name assigned by your...

44 
Password (2):  Please input the password assigned by your Internet 
s e r v i c e   p ro v i d e r   h e re . 
Service Name (3):  Please give a name to this Internet service, this is 
optional 
 
MTU (4):  Please input the MTU value of your network 
connection here. If you don’t know, you can use 
default value. 
 
Connection    Please select the connection type of Internet 
Type (5):  connection you wish to use. 
Continuous – The connection will be kept always on. If 
the connection is interrupted,...

45 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-4 Setup procedure for ‘PPTP’: 
 
PPTP requires two kinds of setting: WAN interface setting (setup IP 
address) and PPTP setting (PPTP user name and...

46 
your Internet service provider if you don’t know what you should fill in 
these fields. 
 
Now please go to PPTP settings section: 
 
 
 
Here are descriptions of every setup items: 
 
User N a m e (1):  Please input user ID (user name) assigned by your 
I n t e r n e t   s e r v i c e   p ro v i d e r   h e re . 
 
Password (2):  Please input the password assigned by your Internet 
s e r v i c e   p ro v i d e r   h e re . 
 
PPTP Gateway (3):  Please input the IP address of PPTP gateway 
assigned...

47 
Connection    Please select the connection type of Internet 
type (7) :   connection you wish to use, please refer to section 
2-5-3 for detailed descriptions. 
 
Idle Time Out (8):  Please input the idle time out of Internet connection 
you wish to use, and refer to section 2-5-3 for 
detailed descriptions. 
 
When you finish with all settings, please click ‘Apply’ (9) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup...

48 
 
Here are descriptions of every setup items: 
 
User ID (1):  Please input user ID (user name) assigned by your 
I n t e r n e t   s e r v i c e   p ro v i d e r   h e re . 
 
Password (2):  Please input the password assigned by your Internet 
s e r v i c e   p ro v i d e r   h e re . 
 
L2TP   Please input the IP address of PPTP gateway  
Gateway (3):  assigned by your Internet service provider here. 
 
MTU (4):  Please input the MTU value of your network connection 
here. If you don’t know, you...

49 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-6 Setup procedure for ‘Telstra Big Pond’: 
 
 
 
This setting only works when you’re using Telstra big pond’s networ k  
service in Australia. You need to input: 
 
User Name (1):   Please input the user name assigned by Telstra. 
 
Password (2):   Please input the password assigned by Telstra. 
 
Assign login     Check this box to choose login server by yourself. 
server manually...

50 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-7 Setup procedure for ‘DNS’: 
 
If you select ‘Dynamic IP’ or ‘PPPoE’ as Internet connection method, at 
least one DNS server’s IP address should be...

51 
Here are descriptions of every setup items: 
 
DNS Address (1):  Please input the IP address of DNS server provided 
by your service provider. 
 
Secondary    Please input the IP address of another DNS 
DNS Address (2):  server provided by your service provider, this is 
optional. 
 
 
 
 
 
 
 
After you finish with all settings, please click ‘Apply’ (3) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue...