Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual

Rev A  April 2011 Page 4.37
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Test Patterns
Press  and   to select Test Patterns.
 Press  to open the Test Patterns submenu.
 Press  and   to select from:
Off
Alignment Grid
Screen Layout
    (shows outlines of various aspect ratios)
Chequerboard
Colour Bars
0% Field
      (black)
ColorMAX...

Page 4.38 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Setup menu, Projector Setup continued
FastFrame
Used to reduce the artifacts and image blur typically associated with ra\
pidly moving 
images, by increasing the time the display is blanked between frames (d\
ark time).
From the Projector Setup menu, press 
 and   to...

Rev A  April 2011 Page 4.39
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Setup Menu 
 Projector Setup 
    Edge Blend
 
Setup Menu  
 Projector Setup 
    Edge Blend 
      Active Edges
Edge Blend
Used to improve the appearance of multi-projector displays, by blending \
overlapping 
edges to present a seamless image.
Examples
From...

Page 4.40 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 The actual blend will be 
smoother than that shown here.
 Edges that have not been 
selected as Active, will be 
greyed out.
 To see the effect of the 
adjustment, turn the Overlap 
Markers ON..
 Input 8 is pixel-mapped directly 
to the DMDs, so the image may...

Rev A  April 2011 Page 4.41
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Black Level Uplift
As it is not possible for any projector to produce an absolute black, an\
y ‘black’ areas 
in the overlapped edges may appear slightly less dark than those in the \
rest of the 
image.
Black Level Uplift can be used to counteract this effect, by...

Page 4.42 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 To adjust Manually:
  Working on one projector at a 
time, display a test pattern of 
0% Field (black), set all four 
border adjustments to zero, 
then increase the size of each, 
until the border disappears.
Non-Addressable Border
Around the edge of the DMD is...

Rev A  April 2011 Page 4.43
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Setup Menu 
 Global Colourimetry
 Some menu items may be 
greyed out - unavailable due to 
the effect of settings made in 
other menus, or due to the type 
of input signal.
 Read these notes on Colour 
and Global Colourimetry 
before making any settings in...

Page 4.44 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Read the notes on Colour and 
Global Colourimetry earlier 
in this section before making 
any settings in the Colour 
menus.
  Note that any changes made in 
the Global Colourimetry menu  
will affect ALL inputs, modes 
and presets for which  Global 
Mode has...

Rev A  April 2011 Page 4.45
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Lamp Setup
Press  and   to select Lamp.
 Press  to open the Lamp submenu.
The middle row shows the current lamp setting.
Change Lamp Setting
Press  and   to select Change Lamp Setting.
Press  to open the Lamp Setting control box.
single lamp models
dual lamp models
•...

Page 4.46 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Lamp Power
Press  and   to select the Lamp Power setting.
 Press  and   to adjust the Lamp Power from:
  80 to 100%  in 1% steps
Lamp Mode
Press  and   to select Lamp Mode.
 Press  and   to select from:
single lamp modes
Lamp 1
  lamp 1 only
Lamp 2 lamp 2 only...