Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual

Rev A  April 2011 Page 5.5
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Standalone version
To install the Userware, simply copy the file (from the CD, or downloaded from 
the Digital Projection website), to a folder on the computer.
Double click on the filename to start the software.
The Userware interface is organised into a number of pages, as listed...

Page 5.6 Rev A  April 2011
5. Userware Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Show page
The Show page is the first to display when the browser connects to the projector .
To return to the Show page  at any time, click on Show.
On / Off
Click On to switch the projector On.
Click Off to switch the projector into Standby mode.
Shutter Open / Closed
Click on Shutter...

Rev A  April 2011 Page 5.7
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Input Presets
recall
To recall a set of modal and lens* settings that have been saved:
Click on Preset , and select one of the Presets A - S, from the drop down menu.
Click on Recall.
  The projector will switch to the saved input source, and redetect the input mode 
before applying the...

Page 5.8 Rev A  April 2011
5. Userware Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Orientation
Click on Orientation to select from the drop down menu.
Input
Click on Input to select from the drop down menu.
Test Pattern
Click on Test Pattern to select from the drop down menu.
Aspect Ratio
Click on Aspect Ratio to select from the drop down menu.
•
•
•
•
Notes
 
For...

Rev A  April 2011 Page 5.9
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Each time a new lens is 
fitted to the projector, 
the calibration procedure 
must be carried out. See 
Setup menu, in Section 4. 
Controlling the projector.
Lens page
To see the Lens page, click on Lens.
Lens controls
Click on the buttons to Move, Focus and Zoom the lens.
Click...

Page 5.10 Rev A  April 2011
5. Userware Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 For more information about 
Edge Blend, see  Setup menu, 
in Section 4. Controlling the 
projector.
Edge Blend page
To see the Edge Blend page , click on Blend.
Markers On / Off
Click on Markers On to display the overlap markers.
Click on Markers Off to remove the overlap...

Rev A  April 2011 Page 5.11
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 For more information about 
Black Level Uplift, see 
Setup menu,  in Section 4. 
Controlling the projector.
 Non-Addressable Border 
should always be set to 
Manual.
Black Level Uplift page
To see this page, click on  Black Level Uplift on the Edge Blend page .
x2, x4 Region...

Page 5.12 Rev A  April 2011
5. Userware Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Changing the Colour Space 
on this page manually 
overrides the colour space 
for analogue component 
inputs, which may result in an 
incorrectly displayed image.
  The Component selection is 
available for the Component 
input only.
  For more information about 
phase, see...

Rev A  April 2011 Page 5.13
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 The Convergence controls 
open in a new window, to allow 
you to visit the Show page , in 
order to display a  Test Pattern.
Convergence controls
To see these controls, click on  Convergence on the Image page.
The Convergence controls open in a new window.
Horizontal...

Page 5.14 Rev A  April 2011
5. Userware Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 The blanking curtains will not 
applied until  Blanking is turned 
On.
  For more information about 
blanking, see  Geometry menu, 
in section 
4. Controlling the 
Projector.
  For more information about 
keystone adjustment, see 
Geometry menu, in section 
4. Controlling the...