Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual

Rev A  April 2011 Page 4.47
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Setup Menu 
 On Screen Display
 The On Screen Display will 
move to the centre of the DMD 
when Blanking is turned On.
  (see Geometry menu, earlier in 
this section).
  If a menu is opened, and no 
other key is pressed within the 
period set in the  OSD...

Page 4.48 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Password
Entry to the password protected area is available to authorised service \
personel 
only.
Press 
 and   to select Password.
 Press  to open the Password control box.
Press  and   to select each digit in turn.
 Press  and   to adjust the digit from:
0 to 9...

Rev A  April 2011 Page 4.49
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 
Setup Menu 
 Comunication
 When fresh batteries are 
inserted in the remote control, 
it will default to address  00. 
Remote control  00 is a master 
control,  able to control all 
projectors.
  If two or more projectors are set 
to the same address, they can...

Page 4.50 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 
Setup Menu 
 Network
 Some items may be greyed out 
or not editable, due to the effect 
of other settings made in the 
Network submenu.
  For example, if a Wired 
Connection is selected:
  Wifi, Channel and SSID will be 
unavailable.
Setup menu continued...

Rev A  April 2011 Page 4.51
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 IP Address cannot be changed 
if DHCP is set to ON.
 DHCP will set the the address, 
which will be displayed for 
information only.
Setup menu, Network continued
DHCP
Press  and   to select DHCP
 Press  to open the DHCP control box.
 Press  and   to select...

Page 4.52 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 IP Subnet cannot be changed if 
DHCP is set to ON.
  DHCP will set the the subnet 
mask, which will be displayed 
for information only.
Subnet Mask
Press  and   to select Subnet
 Press  to open the Subnet control box.
 Press  and   to select from:
Automatic
or...

Rev A  April 2011 Page 4.53
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Gateway Mask
Press  and   to select Gateway
Press 
 to open the IP Address control box.
Use 
 and   to select each number in turn.
Use  and   to adjust the number
then move to the next number.
Use 
 and   to select from
Apply
  Press   to apply the new IP Address.
or...

Page 4.54 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 3D may not be present on some 
models
 
Setup Menu  
 3D
 If FastFrame  is turned on, then 
setting 3D Mode to Consumer 
or Professional will turn it off.
  When 3D Enable is on, it is not 
possible to turn on  FastFrame.
 It is important that 3D Input 
Assign...

Rev A  April 2011 Page 4.55
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
3D Format
Press  and   to select 3D Format.
 Press  and   to select from:
Sequential
Dual Pipe
Frame Packing
Top-And-Bottom
Side-By-Side (Half)
•
Notes
 
3D may not be present on some 
models
 None of the 3D options are 
avialable unless  3D Mode is set 
to Consumer...

Page 4.56 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Dark time
Ghosting can be caused by the left and right images overlapping during t\
he time 
that the Z screen or 3D glasses are switching.
Press 
 and   to select Dark Time.
 Press  and   to adjust the slider (0 to 6000 µS).
Frame Dominance
The outgoing 3D frames are...