Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual

Rev A  April 2011 Page 4.7
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Any subsequent changes that you make to the modal settings will be saved in the 
mode history,  with the input mode.
If a new signal is detected, the mode history for the previous signal will be saved in 
the mode history, and the new mode added, along with a new set...

Page 4.8 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Special considerations when using Input 8
Differences between Input 8 and Inputs 1-7
Input 8 has been designed to offer the user access to a very high bandwidth digital 
video path, free of the limitations inherent to standard image processing techniques.  
As such, the...

Rev A  April 2011 Page 4.9
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 There are more indicators on 
the Control panel, and these are 
described on the next page.
 Input 8 and 3D may not be 
present on some models
Indicators
Input status indicators
The indicator next to each input connector on the rear input panel will light as...

Page 4.10 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Many features are controlled 
from the menus using the menu 
navigation keys on the remote 
control or keypad.
 For more information about 
using the menus, see later in 
this section, Using the menus.
 Some of the menu features, for 
example brightness,...

Rev A  April 2011 Page 4.11
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
The remote control
Layout
Timeout
There is a 10 second timeout for the three Lens adjustment keys (see note on next 
page).
There is a separate, adjustable timeout for the On Screen Menus (see  On Screen 
Display, in Setup Menu, later in this section).
Notes
  Many...

Page 4.12 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 Closing the shutter produces 
a better black than simply 
removing the signal, as the 
light source will be completely 
blocked by the shutter blade.
 When the OSD is OFF:
  -  all menu navigation keys are 
disabled.
 - keys such as  BrI 
(brightness) will still...

Rev A  April 2011 Page 4.13
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Calibrate Focus
Press  followed by  to calibrate the lens focus mechanism.
Calibrate Zoom
Press  followed by  to calibrate the lens zoom mechanism.
Auto-detect input mode
Press  to force the projector to re-detect the input mode and apply the 
default modal settings....

Page 4.14 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 For more information about 
input modes and input presets, 
see earlier in this section,  Input 
modes and settings.
  See also Input menu , later in 
this section.
  A preset can be applied only to 
the same mode for which it was 
created. If the detected input...

Rev A  April 2011 Page 4.15
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 4. Controlling the projector
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also  Section 4, Overview .
Notes
 The Saturation control is 
available for Composite, S-
Video and Component inputs 
only.
  The Phase control is available 
for RGB inputs only.
  The Geometry settings are 
NOT available for Input 8.
  For all adjustments on this page 
that require more than...

Page 4.16 Rev A  April 2011
4. Controlling the projector Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 The magnify feature utilises a 
digital zoom. Used with the pan 
control, this can be used to:
  - enlarge a section of the image
 - enable the use of multiple 
projectors to construct a large 
image from tiles.
 The pan control is available 
only when the image...