Digital Projection Titan Wuxga 3d , Dual 3d, Titan Wuxga 330, 660 User Manual

Rev A   April 2011 Page 2.17
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 2. Installation
Mounting the projector
The projector is designed to be used on a flat surface, but the optional rigging frame 
will allow it to be suspended from a lighting truss or rigging. The four adjustable feet 
under the chassis allow the projector to be lowered onto a flat surface without any 
danger of hands being trapped between the bottom frame and the surface.
Chassis adjustment
If the projector is to...

Page 2.18 Rev A   April 2011
2. Installation Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
Adjusting the rigging frame
Coarse adjustment of projector level should be made by adjusting the length of 
the supporting wires or chains, or by adjusting the position of the truss or rigging. 
Once the initial coarse adjustment has been made, fine adjustment can be made by 
turning the frame adjusters on the rigging frame:
To tilt the projector forwards and backwards (pitch adjustment), 
turn...

Rev A   April 2011 Page 2.19
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 2. Installation
Notes
 When stacking projectors, 
the stack MUST be vertical, 
to ensure that the stresses 
are distributed to all frame 
couplings.
 Make sure that the surface, 
ceiling or rigging that is 
to support the projector is 
capable of supporting the 
combined weight of all the 
projectors and lenses (see 
specification for weights) .
 Do not place heavy objects 
on top of the projector 
chassis. Only...

Page 2.20 Rev A   April 2011
2. Installation Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
Notes
 For more information on 
selecting an input source, see 
section 4. Overview, Using 
the control keys, and Using 
the menus.
 For more information about pin 
connections and control codes 
see section 7. Appendix.
 For more information on 
input modes see  section 
4.
 Overview.
  Input 8 and 3D may not be 
present on some models
Connecting the projector
Signal Inputs
The following inputs...

Rev A   April 2011 Page 2.21
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 2. Installation
Notes
 There is no scaler on input 8.
  Images up to and including the 
native resolution of the display 
will be displayed pixel for pixel 
and centred.
 This enables the projector to 
maximise the image bandwidth 
and greyscale resolution.
Input format, DVI input 3
Single DVI-D
Sources up to 1920x1080 resolution; 24-60Hz; 8 bits per colour.
Sources up to 1920x1200 resolution; 24-60Hz; 8 bits...

Page 2.22 Rev A   April 2011
2. Installation Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
DVI Input connection examples
Single DVI video source
Single or Dual DVI video source Input 3
Input 8 MAINProjector
Input 8 MAIN
Input 8 SUB
 Twin DVI video source Projector
Notes
 
Dual DVI:
  high bandwidth/frame rate
 Twin DVI:
  increased bit depth/extended 
greyscale
 For important information about 
how Input 8 is used, see INPUT 
8 in the Notes column, and also 
Section 4, Overview.
Input...

Rev A   April 2011 Page 2.23
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 2. Installation
Projector
3D server
Z screen or  3D glasses
Inputs 1-7
Sync
Video
Sync out
3D connection examples
3D sources up to 60Hz, requiring frame doubling and left/right 
interleaving Notes
 
For important information about 
how Input 8 is used, see INPUT 
8 in the Notes column, and also 
Section 4, Overview.
Sync in
Projector
3D server
Z screen or  3D glasses
Input 8
Sync
Video
Sync out
Sync in
3D...

Page 2.24 Rev A   April 2011
2. Installation Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual
Notes
 For more information about pin 
connections and control codes 
see section 7. Appendix.
 For more information about 
using a browser to control the 
projector see  section 4. Using 
the menus.
Computer Null-modem  
cable
Control connection examples
LAN connection
All of the projector’s features can be controlled via a LAN connection, using a 
standard internet browser package such as...

Rev A   April 2011 Page 2.25
Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual 2. Installation
Notes
 Use only the power cable 
provided.
 Ensure that the power 
outlet includes a Ground 
connection, as this 
equipment MUST be earthed.
 Handle the power cable 
carefully and avoid sharp 
bends. Do not use a damaged 
power cable.
Power connection
When mains power is first applied, the projector will perform a self-test, then go into 
Standby mode.
The Power indicator on the control panel...

Page 2.26 Rev A   April 2011
2. Installation Digital Projection TITAN WUXGA 3D, Dual 3D, 330. 660 User Manual