Digital Projection Titan Sx+ 3d, Dual 3d, Titan Sx+ 3d, Dual 3d Ultra Contrast User Manual

Rev C  April 2011 Page 5.19
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 3D may not be present on some 
models
 For more information about the 
3D settings, see Setup menu, 
in section 
4. Controlling the 
projector.
3D page
To see the 3D page, click on 3D.
3D Enable
Click on 3D Enable to turn 3D mode On  or Off .
3D Input
Click on 3D Input  to...

Page 5.20 Rev C  April 2011
5. Userware Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 3D files are named 
filename.ps3d.
Frame Rate Multiplier
Click on Frame Rate Multiplier to select from the drop down menu.
3D Format
Click on 3D Format to select from the drop down menu.
Create 3D Preset
Click on Create 3D Preset  to save the current 3D settings to a 3D file...

Rev C  April 2011 Page 5.21
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 The Global page  will not be 
available unless  Global is 
selected in  Modal Colour 
Mode (see next page).
  For more information about 
colour mode, see  Colour menu 
and Setup menu, in section 
4. Controlling the projector.
  Select ColorMAX User 1 or 
ColorMAX User 2,...

Page 5.22 Rev C  April 2011
5. Userware Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 For more information about 
colour mode, see  Colour menu 
and Setup menu, in section 
4. Controlling the projector.
  Select ColorMAX User 1 or 
ColorMAX User 2,  to use the 
TCGD values set up on the  
TCGD page.
  For more information about 
ColorMAX , read the notes on...

Rev C  April 2011 Page 5.23
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Lift and Gain sliders
Use the sliders to adjust the  Lift and Gain for Red, Green and Blue individually.
Temperature slider
Use the slider to adjust the Colour Temperature between 3,000K and 10,000K.
•
•
Modal Colour page continuedNotes
 
For more information about 
colour mode,...

Page 5.24 Rev C  April 2011
5. Userware Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
NotesInformation page
To see the Information page , click on Info.
Projector Information
Click on Projector Information  to see the following information about the 
projector and the Userware:
Digital Projection
Click on Digital Projection  to see the following contact...

Rev C  April 2011 Page 5.25
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 For more information about the 
FastFrame settings, see Setup 
menu, in section 
4. Controlling 
the projector.
FastFrame page
To see the FastFrame page, click on F-Frame.
FastFrame Enable
Click on FastFrame Enable to turn FastFrame mode On  or Off .
Dark Time
Use the slider...

Page 5.26 Rev C  April 2011
5. Userware Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 For more information about 
lamp mode, see  Setup menu, 
in section 
4. Controlling the 
projector.
System page
To see the System page, click on System .
OSD
Click on OSD to turn the on-screen display On  or Off .
Backlight
Click on Backlight to turn the control panel...

Rev C  April 2011 Page 5.27
Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual 5. Userware
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Notes
 The Connect page is available 
only on the Standalone version 
of the Userware.
  The Userware can be used to 
control only one projector at a 
time, and only one instance can 
be running at one time.
  The Connect page can be 
used to switch control between 
multiple...

Page 5.28 Rev C  April 2011
5. Userware Digital Projection TITAN sx+ 3D, Dual 3D, Ultra Contrast User Manual
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .