Digital Projection Showlite 3000sx, 4000gv User Manual

Image Options - SHOWlite 4000gv (Cont.)
Gamma Correction ..................................................CÑ56
Advanced Options ...................................................CÑ57
Factory Default .........................................................CÑ62
Projector Options ...........................................................CÑ63
Timer .........................................................................CÑ63
Menu...

System Operation
OPERATION
LBV00073; Revision A - 11/01/2002 

All the functions of the projector can be controlled by the remote control
unit. The remote control can be directly connected to the projector via a 
control cable or to provide more flexibility send infra red signals which are detected
by sensors located at the front and rear of the projector.
A description of all the remote control functions is provided overleaf.
CÑ1
System Operation
Remote Control Overview
OPERATION
LBV00073; Revision A - 11/01/2002
PICTURE
KEYSTONESOUND
AMPLITUDEOSD
ENTRYLIST
INFO....

1 - POWER ON
Press to turn on the projector. The POWER indicator lights up green.
2 - POWER OFF
Press and hold this button for a minimum of two seconds to turn off the projector.
3 - MENU
Press to display the main menu. While pressing and holding CTL, press this button
to display the Remote Control ID dialog box to specify the remote control ID.
4 - ENTER
Executes the menu selection and activates items selected from the menu. When the
slidebar or dialog box is displayed, pressing this button confirms...

8 - IMAGE/PROJECTOR
Displays the Image Option screen. When used with a SHOWlite 3000sx projector
this button sequentially selects Pixel Adjust, Position, Aspect Ratio, Resolution,
Overscan, Video Filter and Blanking.
For SHOWlite 4000gv projectors this button sequentially selects Gamma
Correction, Aspect Ratio, Noise Reduction, Color Matrix, Resolution, Video Filter,
Overscan, Clamp Timing, Y/C Delay, YTR Adjustment, CTR Adjustment and HD
Delay.
For either projector model, holding down CTL and pressing...

11 - CANCEL
Press to exit the menu. When in the menu system, pressing this button with CTL
returns to the previous menu allowing adjustment of several items concurrently.
12 - INFO
Displays the Source Information or Projector Information window. This button
operates as a toggle between the two windows.
13 - TEST
Displays the projector test patterns. Pressing this button sequentially rotates through
the nine available test patterns.
14 - HELP
Provides online help.
15 - PIXEL
Displays the Pixel Adjust...

20 - MUTE PICTURE
Pressing Mute Picture toggles the display between the incoming signal and a blank
screen.
21 - KEYSTONE (R)
Display the Keystone Correction screen. When a test pattern is displayed, holding
down CTL and pressing this button displays a red test pattern.
22 - AMPLITUDE (G)
For use by authorised service personnel only. When a test pattern is displayed, 
holding down CTL and pressing this button displays a green test pattern.
23 - ENTRY LIST (B)
Display the Entry List screen. When a test...

27 - REMOTE JACK
Connector for hard wire operation of the projector.
28  - INFRARED TRANSMITTER
Infrared transmitter for sending control signals to the projector.
CÑ6
System Operation
OPERATION
LBV00073; Revision A - 11/01/2002
OFF
+-PICTUREADJUSTABC DEFGHI
JKL MNO PQR
STU
,.
UNDO CANCEL
TEST
PHE INFO.
POSITION PIXEVWX YZ?
WHITE BAL.IMAGE
ON POWERMENU
ENTER
123
456
7
089ADDRESS
PROJECTOR
LENSSHUTTER
BS
27
28 

Direct Key Combinations
The CTL button can be used in conjunction with other remote control buttons to
provide alternative functions. A list of these combinations is provided below.
KEY COMBINATION ACTION
CTL +SOURCE (1-10) Switches to any selected signal found in the Entry 
List. To enable this combination, you must first 
assign specific remote buttons for direct input 
selection in the Entry Edit window.
CTL + ENTER  Displays the Entry Edit Command Window. Only
available while displaying the Entry...

System Operation
Menu System Overview
OPERATION
LBV00073; Revision A - 11/01/2002
Menu windows or dialog box typically have the following elements:
Title bar- Indicates the menu title.
Highlight- Indicates the selected menu or item.
Solid triangle- Indicates further choices are available. A highlighted triangle 
indicates the item is active.
CÑ8
Title Bar
Highlight
Solid Triangle
Cancel ButtonOK Button
Check Box
Slide Bar
Radio Button
Tab