Digital Projection Showlite 3000sx, 4000gv User Manual

Tab- Indicates a group of features in a dialog box. Selecting any tab brings its page
to the front.
Radio button- Use this round button to select an option in a dialog box.
Check box- Place a checkmark in the square box to turn the option On.
Slide bar- Indicates settings or the direction of adjustment.
OK button- Press to confirm your setting. You will return to the previous menu.
Cancel button- Press to cancel your setting. You will return to the previous menu.
Navigating the Menu System
Press the MENU...

The menu system can be customised to meet individual requirements. Selecting a
menu item from the ÔBasic/Custom Menu EditÕ list allows you to custom tailor the
menu items to your needs.
1. Select ÔBasic/Custom Menu EditÕ to display the editing screen.
2. Use the up and down cursors to highlight your selection and press the Enter 
button to place a check mark next to an option to enable that feature in the menu 
system. Pressing the Enter button over a checked box will deselect it. If you 
select an item...

Up to 12 main menu items (within ÔBasic/Custom Menu EditÕ, not including sub
menu items) can be selected.
3. In order for the changes to take effect, use the left and right cursor buttons to 
highlight ÔOKÕ and press the Enter button. To cancel the changes, use the up or 
down arrows to highlight ÔCancelÕ and press the Enter button. To return to the 
factory default, select ÔResetÕ and press Enter.
The default Basic/Custom Menu items are Source Select (RGB 1/2, DVI DIGITAL,
Video 1/2, S-Video and Entry...

Menu Structure
CÑ12
System Operation
OPERATION
LBV00073; Revision A - 11/01/2002
Switcher
Entry List
1. RGB 1
2. RGB 2
3. DVI (DIGITAL)
4. Video 1
5. Video 2
6. S-Video
7. RGB1 (VIDEO)
8. RGB1 (S-VIDEO)
Entry List
Picture
White Balance
Image
Video Adj
Option Adj
Signal Type
Switcher
Keystone
Lamp Mode
Ref. Whit Bal.
All Data/Current Signal
Including Entry List Advance Menu
Source Select
Adjust (Source)
Volume
Ref Adj
Factory Default
Projector Options
Help
Test Pattern
Colour Temperature
Brightness...

CÑ13
System Operation
OPERATION
LBV00073; Revision A - 11/01/2002
Timer
Menu
Setup
Link Mode
Switcher Control
LAN ModeAdvance Menu
Source Select
Adjust (Source)
Volume
Ref Adj
Factory Default
Projector Options
Help
Test Pattern
Standalone / Master / Slave
Standalone / SW1 Level / SW2 Level
Network Board / Default Gateway
Contents
Cross Hatch, Gray Bars, Black Raster,
Gray Raster (25%), Gray Raster (50%),
White Raster, Red/Green/Blue Contents
Source Information
Projector Information
On/Off Timer
Sleep...

The Advanced Menu provides access to sub-menus which allow you to contro\
l the 
projector and to view any system settings.
Source Select- enables selection of an input source.
Adjust (Source)  - allows adjustment of the image parameter settings.
Volume - adjusts the sound level of the projector.
Ref Adj - allows adjustment of the Keystone, Lamp Mode and White Balance
Reference parameters.
Factory Default - returns all adjustments and settings to factory preset levels.
Projector Options - enables you to...

Source Select enables you to select an input source connected to the projector. To
select an input source use the up/down buttons on your remote control or the 
projector cabinet to highlight the desired input type and press Enter.
Entry List
The Entry List window contains a list of all current and previously connected input
signals.
ENTRY EDIT COMMAND (Expert Mode Only)
The names and positions of the signals stored in the entry list can be modified using
the Entry Edit Command. To display the Entry Edit...

Cut- allows you to remove a selected signal from the list. The selected signal is
stored on the ÔclipboardÕ in the projector.
Copy- copies the selected signal from the list and stores it on the ÔclipboardÕ.
Paste- Enables you to paste the signal stored on the Ôclip-boardÕ to any other line of
the list. To do this, select Paste and then select the line number you want to paste to
and press ENTER.
Edit- allows you to change source name or assign the direct key.
The following buttons are not available for...

You can assign specific remote keys for direct signal input selection using the
ÔDirect KeyÕ function. Select ÔListÕ and press ENTER to display the direct Key
assignment list. 
After assigning the desired remote keys, select ÔOKÕ and press ENTER to save
changes and close the window.
After modifying an entry in the list using the Edit function select OK and press
ENTER to save the new settings. To exit without storing setting, select Cancel.
To close the List window without making any changes press CANCEL...

To use both signals, use a different input terminal or assign specific remote keys for
each signal.
1. Cut an existing signal from the Entry List.
i) Select another signal other than the one currently projected because the 
currently projected signal cannot be cut.
ii) Press the ENTRY LIST button on the remote control.
iii) After selecting the existing signal, press and hold down the CTL button and 
press ENTER on the remote control. The Entry Edit Command window will 
appear. Select ÔCutÕ and press...