Digital Projection Showlite 3000sx, 4000gv User Manual
Here you can view all the pages of manual Digital Projection Showlite 3000sx, 4000gv User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
AÑ7 Overview OVERVIEW LBV00073; Revision A - 11/01/2002 DVI L/MONO L/MONO RGB 1 RGB 2 VIDEO 1 VIDEO 2 S- VIDEO AUDIO OUTR/Cr G/Y B/Cb V H/HV MONITOR OUTR L/MONOR L/MONOR L/MONOR R REMOTE 1 PC CONTROLREMOTE2 AC IN SC, TRIGGER OUT OUTIN IN MENU ENTERCANCELSELECT LENS SHIFT LEFT ZOOM FOCUSUP DOWNRIGHT AUTO ADJUST LAMP STATUS POWERON / STAND BY SOURCE Carrying HandleLens Hood Cap Air Filter Ventilation (Inlet) Carrying Handle Controls Lamp Cover
Page 22
Control Panel The control panel on the top of the projector provides all the main controls necessary to operate the projector. 1 - Power Button (ON/STAND BY) Press to turn the projector on when the projector is in the standby condition (Main Power switch must be on and the POWER indicator lit amber). Press and hold for 2 seconds to turn off the projector. 2 - Auto Adjust Button (RGB Only) This button is used to adjust Horizontal and Vertical Position and the Pixel Clock/Phase to provide an optimal...
Page 23
5 - Select Cursors When in the menu system, the up and down cursors are used to select the menu item you wish to adjust. When no menus are present, these cursors operate the volume. The left and right cursor buttons are used to change the setting of the selected menu item. When no menus are present, these cursors can be used to select a slide, or to move the cursor in folder or slide list. When the pointer is being displayed, all the cursors can be used to move the pointer. 6 - Enter Button Executes your...
Page 24
Left Terminal Panel - SHOWlite 3000sx The Left Terminal Panel located on the front of the projector provides all the required connections for PC and Remote Control. 1 - PC CONTROL IN/OUT These Mini D-SUB 15-Pin connections provide for PC control and daisy-chaining of projectors. The IN connection is for the connection of the control device (e.g. a PC). The OUT connection provides a link to another projector for multiple projector operation. To daisy-chain projectors in this manner the OUT connection...
Page 25
2 - REMOTE 1 This Mini D-SUB 15-Pin terminal allows control of the projector from an external switcher. 3 - REMOTE 2 IN/OUT These 2 Mini Jacks provide for hard wire remote control of the projector and daisy- chained operation. To control multiple projectors with the same remote control unit, connect the OUT Jack to the IN Jack of the second projector. 4 - SC. TRIGGER This Screen Trigger is used to operate Screen Controllers (cable not supplied). When the projector is turned on, the SC. TRIGGER output...
Page 26
Left Terminal Panel - SHOWlite 4000gv The Left Terminal Panel located on the front of the projector provides all the required connections for PC and Remote Control. 1 - PC CONTROL IN/OUT These Mini D-SUB 15-Pin connections provide for PC control and daisy-chaining of projectors. The IN connection is for the connection of the control device (e.g. a PC). The OUT connection provides a link to another projector for multiple projector operation. To daisy-chain projectors in this manner the OUT connection...
Page 27
3 - REMOTE 2 IN/OUT These 2 Mini Jacks provide for hard wire remote control of the projector and daisy- chained operation. To control multiple projectors with the same remote control unit, connect the OUT Jack to the IN Jack of the second projector. 4 - SC. TRIGGER This Screen Trigger is used to operate Screen Controllers (not supplied). When the projector is turned on, the SC. TRIGGER output send a low voltage trigger to the Screen Controller to lower the screen. When the projector is turned off, the...
Page 28
PC Card Viewer - SHOWlite 4000gv To access the PC Card Slot pull down the cover on the front left of the projector. 1 - PC CARD SLOT Slot for the insertion of a PC CARD. 2 - PC CARD EJECT Button to eject an inserted PC CARD. 3 - PC CARD ACCESS INDICATOR This indicator will illuminate when a PC CARD is accessed. AÑ14 Overview OVERVIEW LBV00073; Revision A - 11/01/2002 3 2 1
Page 29
Right Terminal Panel - SHOWlite 3000sx The Right Terminal Panel located on the front of the projector provides all the required connections for input signal. 1 - DVI DIGITAL Input Connector This connector is used for digital signal outputs from a computer with a DVI connector. 2 - DVI DIGITAL Audio Input Jacks These RCA connections are for the left and right audio inputs for stereo sound from equipment connected to a computer with a DVI Output. The left input also acts as a monoaural audio input. 3 -...
Page 30
5 - DVI DIGITAL OUTPUT and ANALOG OUTPUT Connectors The DVI DIGITAL OUTPUT connector is used for double stacking of projectors. Use a DVI-D cable to connect the DVI DIGITAL OUTPUT of the projector to the DVI DIGITAL INPUT connector of the following projector. The ANALOG OUTPUT (Mini D-Sub 15-Pin) connection can be used to loop your computer image to an external monitor from either the RGB 1 or RGB 2 inputs. 6 - RGB 1 Input Connector BNC connectors provide inputs for R/Cr, G/Y, B/Cb, H/HV and V outputs of...