Digital Projection Showlite 3000sx, 4000gv User Manual

Section A: Overview
Packaging .................................................................. AÑ1
Safety Advice ............................................................. AÑ3
Components ............................................................... AÑ6
Section B: System Installation
Installation Guidelines ................................................. BÑ1
Installation .................................................................. BÑ8
Basic Operation...

Section C: System Operation (Cont.)
Picture - SHOWlite 4000gv ........................................CÑ54
Volume - SHOWlite 4000gv ......................................CÑ54
Image Options - SHOWlite 4000gv ...........................CÑ55
Projector Options - SHOWlite 4000gv ........................CÑ63
Tools - SHOWlite 4000gv ...........................................CÑ75
Help - SHOWlite 4000gv ...........................................CÑ77
Test Pattern - SHOWlite 4000gv...

Packaging........................................................................ AÑ1
Projector Packaging.................................................... AÑ1
Lens Packaging........................................................... AÑ2
Safety Advice................................................................... AÑ3
Fire and Shock Precautions......................................... AÑ3
Lamp Precautions....................................................... AÑ3
Power Supply...

LBV00073; Revision A - 11/01/2002 

Projector Packaging
The following components should be contained within the projector packaging.
Should any of the components be absent, please contact the dealer who supplied the
projector, or Digital Projection Limited for all countries excluding North America
or Digital Projection Inc. for North American Customers.
1 x  Projector.             1 x Remote Control Unit with 2 x AAA Batteries.
1 x Lens Cap
1 x RGB Signal Cable       1 x Remote Control Cable
(supplied with 4000gv only)
1 x String and Rivet...

3 x AC Power Cables
(1 x 220-240V - Europe, 1 x 120V - North America and 1 x 100V - Japan)
1 x CD ROM                 1 x Ferrite Clamp Core             1 x User Manual
(supplied with 4000gv only)
All packaging should be retained to provide maximum protection during future
shipping of the projector.
Lens Packaging
Lenses are supplied as individual items and the packaging may differ depending on
the version ordered. Please refer to the instructions supplied with your lens.
AÑ2
Overview
OVERVIEW
LBV00073;...

The safety instructions provided in this manual are to ensure the long life of your
projector and to prevent fire and shock. Please read them carefully and heed all
warnings.
Fire and Shock Precautions 
Ensure that there is sufficient ventilation and that vents are unobstructed to prevent
potentially dangerous concentrations of ozone and the build-up of heat inside your
projector. Allow at least 10cm (3Ó) of space between your projector and a wall. 
Ensure that nothing can be spilled on, or dropped...

WARNING: Do not look into the lens while the projector is on. Serious damage to
your eyes could result.
CAUTION: The high pressure lamp may explode if improperly handled. Refer all
servicing to qualified service personnel.
Power Supply
The projector is designed to operate on a power supply of 100-120VAC or 200-
240VAC 50/60Hz. Ensure that your power supply fits this requirement before
attempting to use your projector.
Handle the power cable carefully and avoid excessive bending. A damaged cord can
cause...

Installation Advice
The projector should be placed on a flat, level surface and in a dry area free from
dust and moisture and out of direct sunlight. Exposure to direct sunlight, moisture,
smoke or steam could harm internal components.
Do not place the projector in near heaters or heat radiating appliances and ensure
there is adequate ventilation around the projector so heat can dissipate.
The projector should always be handled with care. Dropping or jarring the projector
could damage internal...

Part Names
AÑ6
Overview
Components
OVERVIEW
LBV00073; Revision A - 11/01/2002
REMOTE 1 PC CONTROLREMOTE2
AC IN SC, TRIGGER OUTOUT IN IN
DVI L/MONO
L/MONO
RGB 1
RGB 2
VIDEO 1
VIDEO 2
S-
VIDEO
AUDIO OUT R/Cr G/Y B/Cb
V H/HV MONITOR OUTR
L/MONO R
L/MONO R L/MONO RR
MENUENTERCANCELSELECT
LENS SHIFT LEFT
ZOOM FOCUSUP
DOWNRIGHT
AUTO
ADJUST
LAMP STATUSPOWERON / STAND BY SOURCE
MENUENTERCANCELSELECT
LENS SHIFT LEFT
ZOOM FOCUSUP
DOWNRIGHT
AUTO
ADJUST
LAMP STATUSPOWERON / STAND BY SOURCE
Lens Hood
Remote Sensor...