Home
>
Digital Projection
>
Projector
>
Digital Projection Projector HIGHlite Laser II 3D Series User Manual
Digital Projection Projector HIGHlite Laser II 3D Series User Manual
Have a look at the manual Digital Projection Projector HIGHlite Laser II 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 147
page 139
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Ghosting
An artifact in 3D image viewing. Ghosting occurs when an image intended \
for one eye is partially seen by the other eye.
Ghosting can be removed by optimizing the dark time and sync delay.
HDCP (High-bandwidth Digital Content Protection)
An encryption scheme used to protect video content.
HDTV (High Definition Television)
A television system with a higher resolution than SDTV and EDTV. It can be transmitted in various formats, notably 1080p...](http://img.usermanuals.tech/thumb/5761/100526/w64_projector_manual_9581_d-146.png "Page 147
page 139
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Ghosting
An artifact in 3D image viewing. Ghosting occurs when an image intended \
for one eye is partially seen by the other eye.
Ghosting can be removed by optimizing the dark time and sync delay.
HDCP (High-bandwidth Digital Content Protection)
An encryption scheme used to protect video content.
HDTV (High Definition Television)
A television system with a higher resolution than SDTV and EDTV. It can be transmitted in various formats, notably 1080p...")
![Page 148
page 140
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Interleaving
The alternation between left and right eye images when displaying 3D.
LED (Light Emitting Diode)
An electronic component that emits light.
Letterboxing
Black margins at the top and bottom of the image. Letterboxing appears w\
hen a wider image is packed into a narrower frame without
changing the original aspect ratio.
Lumen
A photometric unit of radiant power. For projectors, it is normally used to specify the total amount of emi\
tted...](http://img.usermanuals.tech/thumb/5761/100526/w64_projector_manual_9581_d-147.png "Page 148
page 140
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
Interleaving
The alternation between left and right eye images when displaying 3D.
LED (Light Emitting Diode)
An electronic component that emits light.
Letterboxing
Black margins at the top and bottom of the image. Letterboxing appears w\
hen a wider image is packed into a narrower frame without
changing the original aspect ratio.
Lumen
A photometric unit of radiant power. For projectors, it is normally used to specify the total amount of emi\
tted...")
![Page 149
page 141
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
PAL (Phase Alternate Line)
The television system used in the UK, Australia and other countries - 625 lines transmitted at 50 interlaced fields per second.
Pillarboxing
Black margins at the left and right of the image. Pillarboxing appears w\
hen a narrower image is packed into a wider frame without changing
the aspect ratio.
Pixel
Short for Picture Element. The most basic unit of an image. Pixels are arranged in lines and column\
s. Each pixel...](http://img.usermanuals.tech/thumb/5761/100526/w64_projector_manual_9581_d-148.png "Page 149
page 141
Reference Guide
APPENDIX F: GLOSSARY OF TERMS
PAL (Phase Alternate Line)
The television system used in the UK, Australia and other countries - 625 lines transmitted at 50 interlaced fields per second.
Pillarboxing
Black margins at the left and right of the image. Pillarboxing appears w\
hen a narrower image is packed into a wider frame without changing
the aspect ratio.
Pixel
Short for Picture Element. The most basic unit of an image. Pixels are arranged in lines and column\
s. Each pixel...")
page 143 Reference Guide APPENDIX F: GLOSSARY OF TERMS TheaterScope An aspect ratio used in conjunction with a special anamorphic lens to display 2.35:1 images packed into a 16:9 frame. Throw distance The distance between the screen and the projector. Throw ratio The ratio of the throw distance to the screen width. TRC (Throw ratio correction) A special number used in calculating throw distances and throw ratios when the image does not fill the width of the DMD™. TRC is the ratio of the DMD™ aspect ratio to the image source aspect ratio: DMD™ aspect ratioSource aspect ratio TRC = TRC is only used in calculations if it is greater than 1. UXGA A display resolution of 1600 x 1200 pixels with a 4:3 screen aspect ratio. (Stands for Ultra Extended Graphics Array.) Vertical Scan Rate The rate at which the frames of the incoming signal are refreshed. The rate is set by the vertical synchronization from the source and measured in Hertz. Vignetting Optical cropping of the image caused by the components in the projection\ lens. This can happen if too much offset is applied when positioning the image using the lens mount. Notes Digital Projection HIGHlite Laser II 3D Series Rev A August 2016
page 144 Reference Guide APPENDIX F: GLOSSARY OF TERMS Vista An aspect ratio of 1.66:1. WUXGA A display resolution of 1920 x 1200 pixels with a 16:10 screen aspect ratio. (Stands for Widescreen Ultra Extended Graphics Array.) Y This is the luminance input (brightness) from a Component Video signal. YUV See Pr, Pb. ZScreen A special kind of light modulator which polarizes the projected image for 3D viewing. It normally requires that images are projected onto a silver screen. The ZScreen is placed between the projector lens and screen. It changes the polarization of the projected light and switches between left- and right-handed circularly polarized light at the field rate. Notes Digital Projection HIGHlite Laser II 3D Series Rev A August 2016
page 145 Reference Guide TECHNICAL SPECIFICATIONS Technical Specifications Digital Projection reserves the right to change product specifications without prior notice. Models The specifications on these pages refer to the following projector: Series name HIGHlite Laser II 3D Color system: 3-chip DLP® Display type: 3 x 0.67” DarkChip™ DMD™ DMD™ specification (native): 1920 x 1200 pixels, +/- 12° tilt angle Fast transit pixels for smooth grayscale and improved contrast. Notes Digital Projection HIGHlite Laser II 3D Series Rev A August 2016
page 146 Reference Guide TECHNICAL SPECIFICATIONS Inputs and outputs TypeConnectorQtyTypeConnectorQty Video & ComputerCommunication & Control HDMI 1.4HDMI23D Sync OutBNC1 DisplayPort 1.1aDisplayPort13D Sync InBNC1 HDBaseT/LANRJ451LAN (shared with HDBaseT)RJ451 3G-SDI InBNC1RS2329-pin D-Sub1 3G-SDI OutBNC1Wired Remote3.5 mm Stereo Jack1 VGA15-pin D-Sub112V Trigger3.5 mm Stereo Jack2 Component Video3 x BNC1Service PortUSB Type A1 Bandwidth • 170 MHz on analog RGB • 165 Megapixels per second on HDMI • 295 Megapixels per second on DisplayPort Remote control and keypad • Addressable IR remote control, wireless and wired • On-board keypad Automation control • RS232 • LAN Color temperature • User selectable from 3200 to 9300 K Notes Digital Projection HIGHlite Laser II 3D Series Rev A August 2016
page 147 Reference Guide TECHNICAL SPECIFICATIONS Lenses Detailed information about available lenses can be found in Appendix A: Lens Part Numbers. Further information about lens offsets can be found in Positioning The Image > Maximum offset range. Lens mount • Motorised shift, zoom and focus. Mechanical mounting • Front/Rear Table • Front/Rear Ceiling • Adjustable Front/Rear Feet Orientation • Table Top or Inverted: Yes • Pointing Up: Ye s • Pointing Down: Yes • Roll (Portrait): Ye s Notes Information on lenses in this guide: • Appendix A: Lens Part Numbers - detailed descriptions of available lenses. • Maximum offset range - lens offsets. • Choosing A Lens - a step-by-step guide on calculating throw ratios. • Appendix B: Lens Charts - quick reference charts depicting throw distances for commonly used aspect ratios. See also the lens calculator on the Digital Projector website. Do not use the short lens hood with the long throw lens. For further information about using the right lens and hood, see The lens hood in the Installation and Quick-Start Guide . Digital Projection HIGHlite Laser II 3D Series Rev A August 2016
page 148 Reference Guide TECHNICAL SPECIFICATIONS Electrical and physical specifications • Power requirements110-240 VAC, 50-60 Hz (single phase) • Power Consumption1700 W • Thermal Dissipation5800 BTU/hr • Fan Noise52 dBA • Operating Temperature0°C to 35°C (32 to 95F) • Storage Temperature-20°C to 60°C (-4 to 140F) • Operating Humidity20% to 90% non-condensing • Weight55 kg (121.3 lbs) • DimensionsH: 26.5 cm W: 58.5 cm L: 71.0 cm (without lens hood) H: 10.4 in W: 23.0 in L: 28.0 in (without lens hood) Safety & EMC regulations • CE, FCC Class A, UL, CCC, KC, BIS Notes Digital Projection HIGHlite Laser II 3D Series Rev A August 2016
Reference Guide Digital Projection HIGHlite Laser II 3D Series This page is intentionally left blank.
Digital Projection Limited Greenside Way, Middleton Manchester M24 1XX, UK Registered in England No. 2207264 Registered Office: as above Tel (+44) 161 947 3300 Fax (+44) 161 684 7674 [email protected] [email protected] www.digitalprojection.co.uk Digital Projection Inc. 55 Chastain Road, Suite 115 Kennesaw, GA 30144, USA Tel (+1) 770 420 1350 Fax (+1) 770 420 1360 [email protected] www.digitalprojection.com Digital Projection China 中国 北京市 朝阳区 芍药居北里101号 世奥国际中心A座2006室(100029) Rm A2006 ShaoYaoJu 101 North Lane Shi Ao International Center Chaoyang District Beijing 100029, PR CHINA Tel (+86) 10 84888566 Fax (+86) 10 84888566-805 [email protected] www.dp-china.com.cn Digital Projection Asia 16 New Industrial Road #02-10 Hudson Technocentre Singapore 536204 Tel (+65) 6284-1138 Fax (+65) 6284-1238 www.digitalprojectionasia.com 118-089A HIGHlite Laser II 3D Series User Manual Contact Information: