Digital Projection Projector HIGHlite Laser II 3D Series User Manual

							4INSTALLATION AND QUICK-START GUIDE
4CONNECTION GUIDE
4OPERATING GUIDE
4REFERENCE GUIDE 
Rev A August 2016 
HIGHlite Laser II 3D Series
High Brightness Digital Video Projector 
118-089A  
						

							page i
About This Document
Follow the instructions in this manual carefully to ensure safe and long\
-lasting use of the projector.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
 WARNING: this symbol indicates that there is a danger of physical injury \
to yourself and/or damage to the equipment unless 
the instructions are closely followed.
  ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 LASER WARNING: this symbol indicates that there is a potential hazard of eye ex\
posure to laser radiation unless the 
instructions are closely followed.
  NOTE: this symbol indicates that there is some important information tha\
t you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features 
without prior notice.
Legal notice
Trademarks and trade names mentioned in this document remain the property\
 of their respective owners. Digital Projection disclaims any proprietary interest in trademarks and \
trade names other than its own.
Copyright © 2016 Digital Projection Ltd. All rights reserved.
Notes 
Digital Projection HIGHlite Laser II 3D Series
Rev A August 2016  
						

							page ii
Laser Information
	 Caution	-	use	of	controls	or	adjustments	or	performance	of	procedures	other	than	those	specified	herein	may	result	in	
hazardous radiation exposure.
Notes
CAUTION
Possibly hazardous optical radiation emitted  from this product. 
Do not stare at operating lamp. May be harmful to the eyes. ATTENTION
Ce produit peut émettre des rayonnements optiques dangereux.
Ne pas fixer la lampe en fonctionnement. Peut être nocif pour les yeux.
RISK GROUP 2
AC Input / Entr
						

							page iii
Introduction
Congratulations on your purchase of this Digital Projection product.
Your projector has the following key features:
• Support for most 3D formats.
• HDBaseT® for transmission of uncompressed High Definition Video up to 100 m from the source.
• 3G-SDI with loop-through.
• Edge Blend.
• Blanking control for custom input window sizing.
• Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
• Control via LAN and RS232.
• Motorised lens mount.
A serial number is located on the side of the projector. Record it here:
Notes 
Digital Projection HIGHlite Laser II 3D Series
Rev A August 2016  
						

							page iv
CONTENTS
INSTALLATION AND QUICK-START GUIDE ..............................1
WHAT’S IN THE BOX? ...................................................................3
CONNECTING THE POWER SUPPLY .............................................4
Voltage selection ...................................................................................4
PROJECTOR OVERVIEW ...............................................................5
Front and rear views .............................................................................5
Control panel .........................................................................................6
REMOTE CONTROL .......................................................................7
Infrared reception ................................................................................10
POSITIONING THE SCREEN AND PROJECTOR ...........................11
Roll and pitch  ......................................................................................12
CHANGING THE LENS .................................................................13
The lens hood .....................................................................................13
Inserting a new lens ............................................................................14
Removing the lens ..............................................................................15
CHANGING THE FILTERS ............................................................16
OPERATING THE PROJECTOR ....................................................17
Switching the projector on ...................................................................17
Switching the projector off ...................................................................17
Selecting an input signal .....................................................................18
Selecting a test pattern  .......................................................................18
Adjusting the lens ................................................................................19
Adjusting the image.............................................................................19
CONNECTION GUIDE  ........................................................................\
....21
SIGNAL INPUTS ........................................................................\
..23
Digital inputs and outputs ....................................................................23
Analog inputs and outputs...................................................................24
EDID on the HDMI, DisplayPort and VGA inputs ................................25
Using HDMI/DisplayPort switchers with the projector .........................25
3D connections ...................................................................................26
3D sources up to 60Hz requiring frame doubling and left/right interleavi\
ng ..........26
Frame sequential 3D sources up to 120Hz .................................................26
Dual Pipe 3D ......................................................................................26
3D Sync...............................................................................................27
3D Sync in  .........................................................................................27
3D Sync out  .......................................................................................27
CONTROL CONNECTIONS ...........................................................28
LAN connection examples ..................................................................29
RS232 connection example ................................................................30 
Digital Projection HIGHlite Laser II 3D Series
Rev A August 2016  
						

							page v
OPERATING GUIDE ........................................................................\
........31
USING THE MENUS .....................................................................33
Opening the OSD ................................................................................33
Opening a menu..................................................................................33
Exiting menus and closing the OSD....................................................33
Inside a menu......................................................................................34
Accessing sub-menus ...........................................................................34
Executing commands............................................................................34
Editing projector settings .....................................................................35
Using a slider to set a value ....................................................................35
Editing numeric values ..........................................................................35
USING THE PROJECTOR .............................................................36
Main menu  ..........................................................................................36
Lens menu ..........................................................................................37
Lens Control .......................................................................................37
Lens Memory ......................................................................................38
Image menu ........................................................................................39
Noise Reduction ..................................................................................40
Position and Phase ..............................................................................40
Color menu..........................................................................................41
Color Space .......................................................................................41
Color Mode  ........................................................................................42
Geometry menu  ..................................................................................47
Aspect Ratio .......................................................................................47
Digital Zoom & Shift ..............................................................................49
Overscan ...........................................................................................50
Blanking ............................................................................................51
Keystone  ...........................................................................................52
4 Corners  ..........................................................................................54
Rotation ............................................................................................55
Pincushion / Barrel ...............................................................................56
Edge Blend menu................................................................................57
Blend Width........................................................................................58
Black Level Uplift  .................................................................................59
3D menu..............................................................................................60
3D types ............................................................................................61
Some 3D settings explained ...................................................................62
Frame rate multiplication in 3D images ......................................................63
Laser menu .........................................................................................64
Setup menu .........................................................................................65
ColorMax Setting  .................................................................................67
Power On/Off ......................................................................................68
Clock Adjust .......................................................................................69
OSD Settings ......................................................................................70
Memory .............................................................................................70
Network menu .....................................................................................71
PIP menu  ............................................................................................72
Information menu ................................................................................73
Signal Format .....................................................................................73
System Status  ....................................................................................74
Thermal Status....................................................................................74
Factory Reset .....................................................................................75
POSSIBLE COMBINATIONS OF SETTINGS ..................................76
CONTENTS (continued) 
Digital Projection HIGHlite Laser II 3D Series
Rev A August 2016  
						

							page vi
REFERENCE GUIDE ........................................................................\
........77
THE DMD™ ........................................................................\
..........80
CHOOSING A LENS .....................................................................82
Basic calculation  .................................................................................83
Basic calculation example ...................................................................84
Full lens calculation  .............................................................................85
Introducing TRC ..................................................................................85
Calculating TRC ..................................................................................86
Calculating the throw ratio with TRC .........................................................87
Full lens calculation example ..............................................................88
SCREEN REQUIREMENTS  ...........................................................89
Fitting the image to the DMD™ ...........................................................89
WUXGA images displayed full width  .........................................................89
WUXGA images displayed with a height of 1080 pixels ..................................90
WUXGA images displayed full height ........................................................91
Diagonal screen sizes .........................................................................92
Fitting the image to the screen  ............................................................93
Positioning the screen and projector ...................................................94
POSITIONING THE IMAGE  ...........................................................95
Maximum offset range .........................................................................97
ASPECT RATIOS EXPLAINED ......................................................98
Aspect ratio examples  .........................................................................99
FRAME RATES AND PULLDOWNS EXPLAINED .........................101
Interlaced and progressive scan .......................................................101
Frame rates of image sources  ..........................................................101
Pulldowns - conversion into destination formats ...............................102
2:3 (normal) pulldown .........................................................................102
2:3:3:2 (advanced) pulldown .................................................................103
APPENDIX A: LENS PART NUMBERS ........................................104
APPENDIX B: LENS CHARTS ....................................................105
How to use the lens charts ...................................................................105
TRC values applied in the charts ...........................................................106
Fixed lenses - full DMD™ width images ...................................................107
Zoom lenses - full DMD™ width images ..................................................108
Fixed lenses - 1.25:1 images  ................................................................109
Zoom lenses - 1.25:1 images ................................................................11 0
Fixed lenses - 1.33:1 images .................................................................111
Zoom lenses - 1.33:1 images ................................................................11 2
APPENDIX C: SUPPORTED SIGNAL INPUT MODES ...................11 3
2D formats.........................................................................................11 3
3D formats.........................................................................................11 5
APPENDIX D: MENU MAP ...........................................................11 7
CONTENTS (continued) 
Digital Projection HIGHlite Laser II 3D Series
Rev A August 2016  
						

							page vii
APPENDIX E: WIRING DETAILS .................................................128
Signal inputs and outputs ..................................................................128
VGA  ...............................................................................................128
HDMI 1 and 2  ...................................................................................129
DisplayPort ......................................................................................130
3G-SDI In, 3G-SDI Out ........................................................................131
COMPONENT ..................................................................................131
Control connections  ..........................................................................132
LAN ...............................................................................................132
RS232 ............................................................................................132
Trigger 1 & Trigger 2 ...........................................................................133
IR input ...........................................................................................133
3D Sync IN and 3D Sync OUT ..............................................................133
APPENDIX F: GLOSSARY OF TERMS ........................................134
TECHNICAL SPECIFICATIONS ..................................................145
Models...............................................................................................145
Inputs and outputs.............................................................................146
Bandwidth  .........................................................................................146
Remote control and keypad ..............................................................146
Automation control ............................................................................146
Color temperature .............................................................................146
Lenses...............................................................................................147
Lens mount  .......................................................................................147
Mechanical mounting ........................................................................147
Orientation.........................................................................................147
Electrical and physical specifications ................................................148
Safety & EMC regulations .................................................................148
CONTENTS (continued) 
Digital Projection HIGHlite Laser II 3D Series
Rev A August 2016  
						

							INSTALLATION AND QUICK-START GUIDE4 
Rev A August 2016 
HIGHlite Laser II 3D Series
High Brightness Digital Video Projector  
						

							Installation and Quick-Start Guide
IN THIS GUIDE
IN THIS GUIDE
What’s In The Box? ........................................................................\
.....................3
Connecting The Power Supply ........................................................................\
4
Voltage selection .........................................................................................................4
Projector Over view ........................................................................\
.....................5
Front and rear views ...................................................................................................5
Control Panel ........................................................................\
................................6
Remote Control ........................................................................\
............................7
Infrared reception ......................................................................................................10
Positioning The Screen And Projector .......................................................11
Roll and pitch  ............................................................................................................12
Changing The Lens ........................................................................\
...................13
The lens hood ............................................................................................................13
Inserting a new lens ..................................................................................................14
Removing the lens  ....................................................................................................15
Changing The Filters ........................................................................\
................16
Operating The Projector ........................................................................\
.........17
Switching the projector on .......................................................................................17
Switching the projector off .......................................................................................17
Selecting an input signal ..........................................................................................18
Selecting a test pattern .............................................................................................18
Adjusting the lens .....................................................................................................19
Adjusting the image  ..................................................................................................19 
Digital Projection HIGHlite Laser II 3D Series 
Rev A August 2016