Digital Projection Projector E-Vision 8000 Series User Manual

E-Vision 8000 Series
High Brightness Digital Video Projector
OPERATING GUIDE
Rev F July 2014  

Digital Projection E-Vision 8000 Series  IN THIS GUIDE Operating Guide
IN THIS GUIDE
Using The Remote Control ........................................................................\
.....28
Test Pattern ................................................................................................................28
Using The Control Panel ........................................................................\
.........29
Using The Menus...

Digital Projection E-Vision 8000 Series  IN THIS GUIDE Operating Guide
CONTROL menu ........................................................................................................45
Eco Network Power ....................................................................................................\
....45
Auto Power Off .....................................................................................................\
...........45
Auto Power On...

Digital Projection E-Vision 8000 Series  USING THE REMOTE CONTROL Operating Guide
28
Using The Remote ControlNotes
 Some options and controls may not 
be available due to settings in the 
menus.
 For full details of how to use the 
menu system, see later in this guide.
Test Pattern
• Press ENTER to display a Test Pattern.
• Use  or to scroll through the 
following Test Patterns:
... Off, Color Bars, Alignment Grid, Burst, Red, Green, Blue, White, Black, Cross Mark, Cross Hatch + Mark, Corrected Red,...

Digital Projection E-Vision 8000 Series  USING THE CONTROL PANEL Operating Guide
29
Notes
 Some options and controls may not 
be available due to settings in the 
menus.
 For full details of how to use the 
menu system, see later in this guide.
Using The Control Panel
MENU controlsLENS controls
POWER: Off or Standby
INPUT: select from the available video input signals
AUTO SYNC: Projector will re-synchronise with the current input signal
ASPECT: select from a list of available aspect ratiosSHUTTER: open...

Digital Projection E-Vision 8000 Series  USING THE MENUS Operating Guide
30
Using The Menus
Use the buttons on the projector control 
panel or on the remote control, to access the 
menu system.
• To open the on-screen display (OSD), 
press MENU. To close, press EXIT/
RETURN.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Remote controlProjector control panel
Navigating the menus
• Select a menu using
 and,
• then...

Digital Projection E-Vision 8000 Series  USING THE MENUS Operating Guide
31
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
 The Sub Menu appears to either 
the left or right side of the menu it 
was called from, depending on the 
space available.
 The Sub Submenu appears in place 
of the submenu it was called from.
Submenus
• Select a submenu using
 and.
• then open the submenu by pressing 
ENTER.
The submenu...

Digital Projection E-Vision 8000 Series  USING THE MENUS Operating Guide
32
Selecting parameters
Most parameters are changed by selecting 
from a list:
• Select from the list using
 and .
• The change will usually be made 
immediately.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
 There may be a short delay when 
changing some parameters, due to 
internal processing time.
 The submenu appears to the left or...

Digital Projection E-Vision 8000 Series  USING THE MENUS Operating Guide
33
Sliders
• Use  or to adjust the value.
The menu will disappear, to be replaced 
by a slider bar.
• To return to the menu, press MENU.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded grey on the actual menu.
Commands
• To execute the command, press 
ENTER.
In this example,
• use  or to move the blue 
highlight to OK or Cancel,
• then press ENTER to confirm your...

Digital Projection E-Vision 8000 Series  A TOUR OF THE MENUS Operating Guide
34
A Tour Of  The Menus
INPUT menu
Input Selection
• Press ENTER to open the Input Selection menu, then select an input from the list.
PIP (Picture in Picture) submenu
• Press ENTER to open the PIP submenu.
PIP Option
• Set PIP Option to On or Off.
PIP Input
• Select a PIP Input from the drop-down list. The inputs are divided into two 
groups – the main image must be from one group, and the subimage must\
 
be from the other...