Home
>
Digital Projection
>
Projector
>
Digital Projection Projector E-Vision 6800 3D Series User Manual
Digital Projection Projector E-Vision 6800 3D Series User Manual
Have a look at the manual Digital Projection Projector E-Vision 6800 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
Remote Communications Guide
IN THIS GUIDE
IN THIS GUIDE
Introduction ........................................................................\
................................51
Network setup ...........................................................................................................51
Serial Port setup ........................................................................................................51
Protocol commands...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-55.png "Page 56
Remote Communications Guide
IN THIS GUIDE
IN THIS GUIDE
Introduction ........................................................................\
................................51
Network setup ...........................................................................................................51
Serial Port setup ........................................................................................................51
Protocol commands...")
![Page 58
page 52
Remote Communications Guide
INTRODUCTION
Protocol commands
Commands are used to simulate menu operations and determine the settings\
of the projector, and use the following format:
• All commands consist of ASCII text strings starting with an asterisk and ending with an ASCII Carriage Return character (code 13):
*command operator
• The string determines which setting the command will affect.
• Spaces are required before the operator and before the value.
• The string can take one of the...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-57.png "Page 58
page 52
Remote Communications Guide
INTRODUCTION
Protocol commands
Commands are used to simulate menu operations and determine the settings\
of the projector, and use the following format:
• All commands consist of ASCII text strings starting with an asterisk and ending with an ASCII Carriage Return character (code 13):
*command operator
• The string determines which setting the command will affect.
• Spaces are required before the operator and before the value.
• The string can take one of the...")
![Page 59
page 53
Remote Communications Guide
COMMAND GUIDE
Command Guide
Protocol commands below are arranged in the order they appear in the OSD\
. Not all OSD settings have corresponding protocol commands.
Inputs
input= ?0 = HDMI
1 = DVI-D
2 = HDBaseT
3 = VGA
4 = Component 1
5 = Component 2
6 = S-Video
7 = Video
Test Patterns
test.pattern= ?0 = Off
1 = White
2 = Black
3 = Red
4 = Green
5 = Blue
6 = Crosshatch
7 = Burst
8 = H Ramp
9 = Color Bar
10 = Checkerboard
Lens menu
lens.left(execute)...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-58.png "Page 59
page 53
Remote Communications Guide
COMMAND GUIDE
Command Guide
Protocol commands below are arranged in the order they appear in the OSD\
. Not all OSD settings have corresponding protocol commands.
Inputs
input= ?0 = HDMI
1 = DVI-D
2 = HDBaseT
3 = VGA
4 = Component 1
5 = Component 2
6 = S-Video
7 = Video
Test Patterns
test.pattern= ?0 = Off
1 = White
2 = Black
3 = Red
4 = Green
5 = Blue
6 = Crosshatch
7 = Burst
8 = H Ramp
9 = Color Bar
10 = Checkerboard
Lens menu
lens.left(execute)...")
page 55 Remote Communications Guide COMMAND GUIDE Color menu color.space= ?0 = Auto 1 = YPbPr 2 = YCbCr 3 = RGB-PC 4 = RGB-Video color.temp= ?0 = Native 1 = 5500K 2 = 6500K 3 = 7800K 4 = 9300K red.lift= ?0 to 200 (integer) red.gain= ?0 to 200 (integer) green.lift= ?0 to 200 (integer) green.gain= ?0 to 200 (integer) blue.lift= ?0 to 200 (integer) blue.gain= ?0 to 200 (integer) Geometr y menu aspect.ratio= ?0 = 5:4 1 = 4:3 2 = 16:10 3 = 16:9 4 = 1.88:1 5 = 2.35:1 6 = Source 7 = Unscaled h.keystone= ?-30 to 30 (integer) v.keystone= ?-30 to 30 (integer) overscan= ?0 = Off, 1 = On Notes Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 56 Remote Communications Guide COMMAND GUIDE 3D menu 3d.format= ?0 = Off 1 = Auto 2 = Side by Side 3 = Top and Bottom 4 = Frame Sequential 3d.dlplink= ?0 = Off, 1 = On 3d.dominance= ?0 = Normal, 1 = Reverse Lamps menu lamp.mode= ?0 = Auto 1 1 = Dual 2 = Lamp 1 3 = Lamp 2 power.mode= ?0 = Eco, 1 = Normal, 2 = Custom lamp.power= ? altitude= ?0 = Off, 1 = On lamp1.hours? lamp2.hours? lamp1.status? lamp2.status? Notes Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 57 Remote Communications Guide COMMAND GUIDE Setup menu orientation= ?0 = Desktop Front 1 = Ceiling Front 2 = Desktop Rear 3 = Ceiling Rear lan.ip= ?A valid IP address in the following format xxx.xxx.xxx.xxx lan.subnet= ?A valid subnet mask address in the following format xxx.xxx.xxx.xxx lan.gateway= ?A valid LAN gateway address in the following format x.x.x.x lan.dns= ?A valid DNS address in the following format x.x.x.x lan.dhcp= ?0 = Off, 1 = On lan.standby= ?0 = Off, 1 = On auto.source= ?0 = Off, 1 = On auto.poweroff= ?0 = Off, 1 = On auto.poweron= ?0 = Off, 1 = On startup.logo= ?0 = Off, 1 = On blank.screen= ?0 = Logo, 1 = Blue, 2 = Black ir.enable= ?0 = Both, 1 = Front, 2 = Rear trig.1= ?0 = Off, 1 = On Information menu model.name? serial? sw.version? act.source? pixel.clock? h.refresh? v.refresh? power= ?0 = Off, 1 = On Notes Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 58 Remote Communications Guide WEB CONFIGURATION UTILITY Web Configuration Utility Use the embedded Web Configuration Utility to control the projector via a LAN network: 1. Make sure the projector is connected to a remote computer via LAN. 2. From the remote computer, access the LAN IP address of the projector. The Web Configuration Utility opens. The utility’s features are arranged in the following tabs: 1 Projector Status View projector and network information. 2 Alert Mail Setup Set up error warnings and regular status reports by email. 3 Crestron Access various projector controls via the embedded Crestron RoomView® functionality. Opens in a new browser page. 4 PJLink Set up security options for PJLink. Notes If Standby Power is set to Off, the LAN connection will be disabled when the projector is in STANDBY mode. To enable power on via LAN, set Setup > Network > Standby Power to On. The default LAN IP address is 192.168.0.100. If you suspect this has been changed, then you can view the current Network settings in the Setup menu. For more information about connecting the projector via LAN, see the Connection Guide . 1 2 3 4 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 59 Remote Communications Guide WEB CONFIGURATION UTILITY Email settings To receive error warnings and status reports by email: 1. Navigate to the Alert Mail Setup tab 1. 2. Enter user credentials, SMTP settings, email addresses and preferences as required. Optionally, click Send Test Mail to test your email settings. For assistance with your network settings, consult your network administrator. Notes 1 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 60 Remote Communications Guide WEB CONFIGURATION UTILITY Projector controls To access projector controls, navigate to the Crestron page. From this page you can do the following: 1 Power the projector ON/OFF 2 Select input source 3 Freeze the image 4 Adjust image settings: Contrast, Brightness and Sharpness. Click a button to open a slider. 5 Zoom and shift the image Click the edge of the ribbon to access the Zoom control. 6 Change network settings Click the Tools link. 7 Contact IT support Click Contact IT Help if you require assistance. 8 Access the OSD Click these buttons as you would press the buttons on your remote control. For further information, refer to the Crestron documentation, or visit www.crestron.com Notes 1 7 6 2 8 5 3 4 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 61 Remote Communications Guide WEB CONFIGURATION UTILITY PJLink security options To access PJLink security options, open the PJLink page. From this page you can enable or disable PJLink security and set up a password. Current PJLink specifications can be found at http://pjlink.jbmia.or.jp/english - navigate to the Downloading tab. Notes The PJLink TCP Port number is 5450. Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
Digital Projection Limited Greenside Way, Middleton Manchester M24 1XX, UK Registered in England No. 2207264 Registered Office: as above Tel (+44) 161 947 3300 Fax (+44) 161 684 7674 [email protected] [email protected] www.digitalprojection.co.uk Digital Projection Inc. 55 Chastain Road, Suite 115 Kennesaw, GA 30144, USA Tel (+1) 770 420 1350 Fax (+1) 770 420 1360 [email protected] www.digitalprojection.com Digital Projection China 中国 北京市 朝阳区 芍药居北里101号 世奥国际中心A座2006室(100029) Rm A2006 ShaoYaoJu 101 North Lane Shi Ao International Center Chaoyang District Beijing 100029, PR CHINA Tel (+86) 10 84888566 Fax (+86) 10 84888566-805 [email protected] www.dp-china.com.cn Digital Projection Asia 16 New Industrial Road #02-10 Hudson Technocentre Singapore 536204 Tel (+65) 6284-1138 Fax (+65) 6284-1238 www.digitalprojectionasia.com 116-281A E-Vision 6800 3D Series User Manual Contact Information: