Home
>
Digital Projection
>
Projector
>
Digital Projection Projector E-Vision 6800 3D Series User Manual
Digital Projection Projector E-Vision 6800 3D Series User Manual
Have a look at the manual Digital Projection Projector E-Vision 6800 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
page 10
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Adjusting the lens
Zoom
• Use the ZOOM +/− buttons on the control panel or on the remote control to adjust the lens so that the image fills the screen.
Focus
• Use the FOCUS +/− buttons on the control panel or on the remote control to adjust the len\
s until the image is sharp.
Shift
• Use the LENS SHIFT arrow buttons on the control panel to adjust the position of the image,\
or press the LENS SHIFT button on the remote control then use...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-15.png "Page 16
page 10
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Adjusting the lens
Zoom
• Use the ZOOM +/− buttons on the control panel or on the remote control to adjust the lens so that the image fills the screen.
Focus
• Use the FOCUS +/− buttons on the control panel or on the remote control to adjust the len\
s until the image is sharp.
Shift
• Use the LENS SHIFT arrow buttons on the control panel to adjust the position of the image,\
or press the LENS SHIFT button on the remote control then use...")
![Page 17
page 11
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Switching the projector off
• Press on the control panel or STANDBY on the remote control, then press the button a second time within 5 seconds to confirm your
intention to switch off.
The lamp will go off, and the Power indicator on the control panel will flash amber for a few seconds whilst the lamp cools. The Power
indicator on the control panel will then show amber and the projector wi\
ll be in Standby mode.
• Switch off at the...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-16.png "Page 17
page 11
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Switching the projector off
• Press on the control panel or STANDBY on the remote control, then press the button a second time within 5 seconds to confirm your
intention to switch off.
The lamp will go off, and the Power indicator on the control panel will flash amber for a few seconds whilst the lamp cools. The Power
indicator on the control panel will then show amber and the projector wi\
ll be in Standby mode.
• Switch off at the...")
![Page 20
Connection Guide
IN THIS GUIDE
IN THIS GUIDE
Signal Inputs And Outputs ........................................................................\
.....15
Supported Signal Input Modes .....................................................................16
2D input modes .........................................................................................................16
3D input modes .........................................................................................................18
Control...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-19.png "Page 20
Connection Guide
IN THIS GUIDE
IN THIS GUIDE
Signal Inputs And Outputs ........................................................................\
.....15
Supported Signal Input Modes .....................................................................16
2D input modes .........................................................................................................16
3D input modes .........................................................................................................18
Control...")
page 15 Connection Guide SIGNAL INPUTS AND OUTPUTS Signal Inputs And Outputs 1 HDBaseT/LAN Receives digital signal from HDBaseT-compliant devices. 2 VGA This input receives analog signals from a computer. When using this input, it is best to use a fully wired VGA cable to connect the source to the projector. This will allow the source to determine the projector’s capabilities via DDC and show an optimized image. Such cables can be identified as they have a blue connector shell. 3 Component 1 Connect a set of RGsB, RGBHV or YCbCr cables to the BNC connectors. 4 Component 2 Connect a set of YPbPr or YCbCr cables to the RCA phono connectors. 5 Video Connect a composite video cable to the single RCA phono connector. 6 S-Video Connect an S-Video cable to the 4-pin mini-DIN connector. 7 HDMI This HDMI 1.4 input supports HDCP 1.1 and DVI 1.0. 8 DVI-D This input can receive digital (DVI-D) signal from a compatible source. Supports HDCP. 9 Monitor Out Connect an analog monitor cable (VGA) to the 15-pin D-type connector. Notes For a complete listing of pin configurations for all signal and control connectors, see Wiring Details later in this Guide. When Standby Mode is set to Eco: the Monitor Out connection is disabled. LENS SHIFT ZOOM–FOCUS+ MENU ENTER RETURN SOURCEPOWER WARNING LAMP1LAMP2AUT O 7 2 1 5 3 4 9 6 8 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 16 Connection Guide SUPPORTED SIGNAL INPUT MODES Supported Signal Input Modes 2D input modes SignalResolutionRefresh Rate ( Hz )Total number of lines Horizontal Frequency (kHz) VIDEO / S-VIDEOComponent 1 & 2VGAHDMI / HDBaseTDVI (DVI-D) SDTV480i720 x 48059.9452515.73üü 576i720 x 57650.0062515.63üü EDTV480p59720 x 48059.9452531.47üü 480p60720 x 48060.0052531.50üü 576p50720 x 57650.0062531.25üü HDTV720p501280 x 72050.0075037.50üü 720p591280 x 72059.9475044.96üü 720p601280 x 72060.0075045.00üü 1080p231920 x 108023.98112526.97üü 1080p241920 x 108024.00112527.00üü 1080p251920 x 108025.00112528.13üü 1080p291920 x 108029.97112533.72üü 1080p301920 x 108030.00112533.75üü 1080i501920 x 108050.00112528.13üü 1080p501920 x 108050.00112556.25üüü 1080i591920 x 108059.94112533.72üü 1080p591920 x 108059.94112567.43üüü 1080i601920 x 108060.00112533.75üü 1080p601920 x 108060.00112567.50üüü continues on next page... Notes Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 17 Connection Guide SUPPORTED SIGNAL INPUT MODES SignalResolutionRefresh Rate ( Hz )Total number of lines Horizontal Frequency (kHz) VIDEO / S-VIDEOComponent 1 & 2VGAHDMI / HDBaseTDVI (DVI-D) COMPUTERVGA59640 x 48059.9452531.47üüü VGA60640 x 48060.0052531.50üüü VGA75640 x 48075.0050037.50üüü SVGA60800 x 60060.3262837.88üüü SVGA75800 x 60075.0062546.88üüü SVGA85800 x 60085.0663153.67üüü XGA601024 x 76860.0080648.36üü XGA701024 x 76870.0780656.48üü XGA751024 x 76875.0380060.02üü WXGA501280 x 72049.8374437.07üü WXGA601280 x 76859.8779847.78üü WXGA751280 x 76874.8980560.29üü WXGA851280 x 76884.8480968.63üü WXGA601280 x 80059.8183149.70üüü SXGA601280 x 102460.02106663.98üüü SXGA751280 x 102475.02106679.98üüü SXGA851280 x 102485.02107291.15üüü SXGA+601400 x 105059.98108965.32üüü UXGA601600 x 120060.00125075.00üüü WSXGA+601680 x 105059.95108965.29üüü FHD501920 x 108049.92111 455.62üü WUXGA601920 x 120059.95123574.04üüü Notes Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 18 Connection Guide SUPPORTED SIGNAL INPUT MODES 3D input modes SignalResolutionRefresh Rate ( Hz )Total number of lines Horizontal Frequency (kHz)HDMI / HDBaseTDVI-D VGA59 Frame Sequential640 x 48059.9452531.47ü SVGA60 Frame Sequential800 x 60060.3262837.88ü XGA60 Frame Sequential1024 x 76860.0080648.36ü XGA120 Frame Sequential1024 x 768120.0081397.55ü WXGA60 Frame Sequential1280 x 80059.8183149.70ü WXGA120 Frame Sequential1280 x 800119.90847101.56ü SXGA60 Frame Sequential1280 x 102460.02106663.98ü UXGA60 Frame Sequential1600 x 120060.00125075.00ü WUXGA60 Frame Sequential1920 x 120059.95123574.04ü 720p50 Frame Packing1280 x 72050.00147037.50ü 720p50 Side-by-Side (Half)1280 x 72050.00147037.50ü 720p50 Top-and-Bottom1280 x 72050.0075037.50ü 720p50 Frame Sequential1280 x 72050.0075037.50ü 720p120 Frame Sequential1280 x 720120.0075090.00ü 1080i50 Side-by-Side (Half)1920 x 108050.00112556.25ü 1080i60 Side-by-Side (Half)1920 x 108060.00112567.50ü 1080p24 Frame Packing1920 x 108024.00220527.00ü 1080p24 Side-by-Side (Half)1920 x 108024.00220527.00ü 1080p24 Top-and-Bottom1920 x 108024.00220527.00ü 1080p24 Frame Sequential1920 x 108024.00220527.00ü 1080p50 Side-by-Side (Half)1920 x 108050.00112556.25ü 1080p50 Top-and-Bottom1920 x 108050.00112556.25ü 1080p50 Frame Sequential1920 x 108050.00112556.25ü continues on next page... Notes Only the HDMI and HDBaseT inputs support HDMI 1.4 3D formats. Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 19 Connection Guide SUPPORTED SIGNAL INPUT MODES SignalResolutionRefresh Rate ( Hz )Total number of lines Horizontal Frequency (kHz)HDMI / HDBaseTDVI-D 1080p60 Side-by-Side (Half)1920 x 108060.00112567.50ü 1080p60 Top-and-Bottom1920 x 108060.00112567.50ü 1080p60 Frame Sequential1920 x 108060.00112567.50ü Notes Only the HDMI and HDBaseT inputs support HDMI 1.4 3D formats. Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 20 Connection Guide CONTROL CONNECTIONS Control Connections 1 HDBaseT/LAN Receives digital signal from HDBaseT-compliant devices. All of the projector’s features can be controlled via a LAN connection, using commands described in the Remote Communications Guide. 2 3D Sync Out Connect to a Z Screen or 3D IR emitter as appropriate. 3 Service The USB Service port is used for firmware updates only. 4 Wired Remote The remote control can be connected using a standard TRS cable. 5 RS-232 All of the projector’s features can be controlled via a serial connection, using commands described in the Remote Communications Guide. 6 Screen Trigger The Trigger output can be connected to an electrically operated screen, automatically deploying the screen when the projector is switched on, and retracting the screen when the projector is switched to standby. LENS SHIFT ZOOM–FOCUS+ MENU ENTER RETURN SOURCEPOWER WARNING LAMP1LAMP2AUT O 4 1 5 3 6 2 Notes Plugging in the remote control cable will disable infrared transmission. Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
OPERATING GUIDE4 LENS SHIFTZOOM –FOCUS+ MENU ENTER RETURN SOURCE POWER WARNING LAMP1LAMP2AU TO Rev A Januar y 2015 E-Vision 6800 3D Series High Brightness Digital Video Projector
Operating Guide IN THIS GUIDE IN THIS GUIDE Using The Remote Control ........................................................................\ .....23 Using The Projector ........................................................................\ .................25 Main menu .................................................................................................................25 Lens menu .................................................................................................................26 Image menu ...............................................................................................................27 Image Mode .....................................................................................................\ ...............27 Brightness and Contrast .................................................................................................27 Gamma .....................................................................................................\ ......................28 Dynamic Black .....................................................................................................\ ...........28 Saturation, Hue, Sharpness and Noise Reduction .........................................................28 Position and Phase .....................................................................................................\ ....29 Resync .....................................................................................................\ .......................29 Color menu ................................................................................................................30 Color Space .....................................................................................................\ ...............30 Color Temperature .....................................................................................................\ .....31 Trim .....................................................................................................\ ............................32 Hue / Saturation / Gain ...................................................................................................32 Geometry menu .........................................................................................................33 Aspect Ratio .....................................................................................................\ ...............33 H Keystone and V Keystone ...........................................................................................34 Overscan .....................................................................................................\ ....................36 3D menu .....................................................................................................................37 The 3D Swap setting explained ......................................................................................37 3D types .....................................................................................................\ .....................38 Frame rate multiplication in 3D images ...........................................................................39 Lamps menu ..............................................................................................................40 Setup menu ................................................................................................................41 Network .....................................................................................................\ ......................42 RS232 .....................................................................................................\ ........................42 Security .....................................................................................................\ ......................43 Filter .....................................................................................................\ ...........................43 System .....................................................................................................\ .......................44 Information menu ......................................................................................................45 Source information .....................................................................................................\ .....45 Menu Map........................................................................\ .....................................46 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 23 Operating Guide USING THE REMOTE CONTROL Using The Remote Control 1 Power ON 2 Power OFF 3 Lens controls: FOCUS and ZOOM 4 Navigation Navigate through the menus with the arrows, confirm your choice with ENTER. 5 MENU Access the projector OSD (on-screen display). If the OSD is open, press this button to exit. 6 INPUT Select from the available video input signals. 7 AUTO The projector will re-synchronise with the current input signal. 8 OVERSCAN 9 3D MODE Access the 3D menu. 10 INFO Access the Information menu. continues on next page... Notes Some options and controls may not be available due to settings in the menus. For full details of how to use the menu system, see later in this guide. 1 3 4 156 13 7 10 8 5 9 11 12 14 1716 1918 20 2 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 24 Operating Guide USING THE REMOTE CONTROL 11 TEST PATTERN Select from a list of available test patterns. 12 LENS SHIFT Press this button, then adjust the lens position using the arrow buttons\ . 13 RETURN Press this button to leave the current menu and go back one level. 14 NETWORK Access the Network menu. 15 PICTURE Access the Image menu. 16 BLANK Switch the image off. 17 ASPECT Select from a list of available aspect ratios. 18 LAMP MODE Access the Lamps menu. 19 FREEZE Freeze the current image. 20 LIGHT Press this button to illuminate the buttons on the remote control for 10\ seconds. 1 3 4 156 13 7 10 8 5 9 11 12 14 1716 1918 20 2 Notes Some options and controls may not be available due to settings in the menus. For full details of how to use the menu system, see later in this guide. Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015